The Maxitherm Biomass Firetube Boiler is
a Maxitherm-developed integrated design
that provides excellent safety and reliable
steam generation. The packaged Biomass
Firetube Boiler is pre-engineered to be
compact and attractive in appearance.
Environmentally Friendly
‘The Maxitherm Biomass Firetube Boiler is designed
to burn waste wood chips, palm oil waste (shell,
fibre) or saw dust. This promotes waste reduction
as these are fuel that would have otherwise been
disposed. Also, these fuel have lower SOx content
and particulate content than fossil fuel
Reduced Heat Loss
Wet back construction found in the Maxitherm
Biomass Firetube Boller dramatically minimizes the
need for gas sealing and problem of heat loss that
is found in dryback construction. This also means
that your boiler room will be cleaner and cooler.
Low Operating Cost
Pneumatic fuel feeding ensures that fuel combus-
tion is performed under optimum conditions. This
means that the operating cost for Maxitherm
Biomass Firetube Boiler is kept at a minimum level.
Outstanding Heat Transfer
The completely water cooled combustion chamber
increases the portion of radiant heating surface,
lowering the gas temperature at the entrance of
the first convection pass and increases the overall
operating efficiency of the Maxitherm Biomass
Firetube Boiler.
BOOM en cy
BA rere nO eRe aga}
lexible Furnace
‘The Maxitherm Biomass Firetube Boiler has large
furnace diameter which could be installed with
fixed grate or small chain grate stoker for low ash
fuels.
Easy Handling
Special features such as jacking-friendly fixture
have been included in the desian of the Maxitherm
Biomass Firetube Boiler to promote easy delivery
and installation.
Easy Accessibility
Access to the reversal chamber of Maxitherm
Biomass Firetube Boiler is simple and fast via a
small hinged manway.
Low Refractory Usage
Our wet back construction results in lower refrac-
tory usage, The complicated refractory system
required by a dry back boiler with it's costly shut-
down and replacement problems are eliminated.
Compact Design
Our Maxitherm Biomass Firetube Boiler is designed
to be compact to minimize the amount of required
space.
VY st aeProduct General Arrangement
ELE, CONVEYING
PPENE
CONNIE
Note: The above diagram is a representation. Actuel drawings will vary accordingly
Product Range
Enea
EL WHEEL
s)
1500 28 343 2860 3010 2376
2000 Sed 498 2420. 3310 2300
2500 480 572 4680 3310 2800
3000 576 ee? 5280 3470 500
4000768 15, 5380 3470 $100
960 14, 5580 3470 5100
si 1578 5780 3900 3200
1585 ‘esi 90 4360) 4860
1519 2288 e480 6250 6200
Note: The above data is for reatesantative purpose and is not comprehensive. For further information, please contact is.