SURFACE PREPARATION
Following four standards are most popular and widely applied
NACE: NATIONAL ASSOCIATION CORROSION ENGINIERS:
@ SSPC: STEEL STRUCTURES PAINTING COUNCIL
®@ SIS 055900: SWEDISH STANDARDS INSTITUTION
BS 4232: BRITHISH STANDARDS INSTITUTION
Solvent
SP leaning
Hand tool
SP2 cieaning
Power tool
sP3 ;
cleaning
Witho metal
SPS. blast
cleaning
Comercial
SP6 blast
cleaning
Brush-off
SP7_ blast
cleaning
SPB Pickling
Near-white
SP 10 blast,
cleaning
Removal of oi, grease, dit, sol, salts and
contaminants by cleaning with solvent, vapor,
alkali, emulsion or steam.
Removal of loose rust, loose mill scale, and
loose paint to degree specified by hand
chipping, scarping, sanding, and wire
brushing
‘As above mentioned by power tool chipping,
descaling, sanding, wire brushing and
grinding
Romoval of all visible rust, mill scalo, paint,
and foreing matter by blast cleaning by wheel
‘or nozzle (dry or wet) using sand, grir or shot
Blast cleaning until at least two-thirds of the
surlace area is free of all visible residues (for
rather severe conditions of exposure)
Biast cleaning of all except tightly adhering
residues of mill scale, rust, and coatings,
exposing numerous evently distributed flecks
‘of underlying metal
‘Complete removal of rust and mill scale by
acid, duplox, oF eloctrotytic pickling
Blast cleaning nearly White Motal cleanliness,
until at least 95% of the surface area is free of
all visible residues (for high humidity,
chemical atmosphere, marine, or other
corrosive enviorenments)
sis siz
sis S13
NACE 1
SIS Sa3
BS 4232
(frst quali,
NACE 3
SIS Sa2
BS 4232
(tire quay)
SIS Sat
NACE 2
15 822%
BS 4232
{socond quay)