Pict 2.1. A steel rod that is 5.5 8 long stretches 0.04 in. when a 2-kip tensile load is
roblem 2.1 applied to it. Knowing that = 29 * 10° psi, determine (a) the smallest diameter rod
that should be used, (6) the corresponding normal stress caused by the load.
L= §.5 fi = 66in., $= 0.04 in, P= 2000 Sb. Ss re
PL _ (R000) (66) 8 »
A> Fe? (24 #10* \(6,04) 7 0-!/3793 in
@ A> En a= fB- [Reger - ose
= E . A000 = ksi oat
6 = Rt Se = 17876 pei 17.56 ks2.16 A single axial load of magnitude P = 58 KN is applied at end C of the brass rod
‘ABC, Knowing that E = 105 GPa, determine the diameter d of portion BC for
which the deflection of point C will be 3 mm.
Problem 2.16
30mm
2 F Bhs. Efte + be |
Lam : mE * Eth =
hase “=
Lee | ES _ lee = Gos iot(3 elo) _ _ 1-2 _ ss
Ae” P An 58 x10% Foose: = 37334 x 10° w
= bse 0.8 <2
Ree * aazsqeqo2 = S7ss4 wos 214.28 x1O7o m
=
Aus Bare S giana = 16.5210 * m
= 16.52 mm =Problem 2.17 2.17 Both portions of the rod ABC are made of an aluminum for which E = 70 GPa.
Knowing that the magnitude of P is 4 KN, determine (a) the value of Q so that the
deflection at A is zero, (b) the corresponding deflection of B.
(a) Ay = Fake = F(0.020)° = 314.16 210% m™
q
20-mm diameter Ae = Edec = F(0.060)'= 28274 x18 m*
Am
Force in member AB is P tension
3
EPengition Se = Plis _ (4x107)(0.4)
E Ata (Joxt0?)(319-16 xia)
= 72.756 x(O-% m
“am 60-mm diameter
Force im member BC is Q-P
Comp ttss ion
. (QP )le. (Q-P)(0.8?
Shord en ing Sic E Re (70*107)(2-8274x 16")
= 2.526310" (Q-P)
For zero deldection at A Sse = Sas
2.8263x107(Q-P) = 72.756 xlo™ QQ PF 28.8 x10" N
Q= 98.3*/o + 4x = 82.8%lo N = 32.8 kN
(b) Sto = See = Se = 72-786™JO Sm = 0.0728 mmy =