Professional Documents
Culture Documents
USB - Link Quick Start Card 4 - 0 Version PDF
USB - Link Quick Start Card 4 - 0 Version PDF
Wired communication between the USB-Link™ and your PC, USB- • International® DLC II Master Diagnostics (MD32)
Link™ requires a 15 ft. USB cable. • Allison DOC™
Introducing
W ireless? Yes
1 Install the NEXIQ USB-Link™ drivers and utilities.
Install BT Drivers
If you chose a wired connection, skip steps 3 through 7 and
move on to Step 8. If your system has Integrated Bluetooth,
USB-Link™
remember to uninstall it.
If, however, you are not running Windows XP SP-2, skip this
procedure and move on to Step 6.
T
Confirure BT
Update BT Drivers
Environm ent 6 Use the Bluetooth Configuration Wizard to configure a basic he USB-Link™ is a hardware device that enables service
Bluetooth environment. bay personal computers (PCs) to retrieve vehicle information
using either wireless Bluetooth® technology or a USB cable
7 Use the NEXIQ Bluetooth Connection Utility to select a USB- connection. Once configured, the USB-Link™ interfaces with
Run Connect
Utility
Link™ and test the signal strength. your PC, enabling you to use specific PC applications to per-
form vehicle diagnostics.
8 Connect the USB-Link™ to the vehicle.
This Quick Start Card provides a high-level overview of the in-
9 Use the NEXIQ Device Tester to test the connection between
Test the Set Up Diagnostic stallation process for the USB-Link™. For complete, detailed in-
No Connect to Vehicle the USB-Link™ and the vehicle.
Connection Apps
stallation instructions, please refer to the USB-Link™ Installation
10 Set up diagnostic PC applications that apply to your local envi- and Setup Manual included as a PDF file on the USB-Link™ CD-
ROM.
ronment for use with the USB-Link™.