Professional Documents
Culture Documents
Design Description
DYEERTC
DTR_paper_LVDS
2
Table of Contents
1. Model Version ............................................................................................................. 1
2. Root System ................................................................................................................ 2
2.1. Blocks ............................................................................................................... 2
2.1.1. Parameters ............................................................................................ 2
2.1.2. Block Execution Order ......................................................................... 22
3. Subsystems ................................................................................................................ 34
3.1. 3-phase Instantaneous Active & Reactive Power1 .......................................... 35
3.1.1. Blocks ................................................................................................... 35
3.2. Discrete Mean value ....................................................................................... 43
3.2.1. Blocks ................................................................................................... 43
3.3. Discrete RMS value1 ....................................................................................... 52
3.3.1. Blocks ................................................................................................... 52
3.4. Discrete Variable Transport Delay ................................................................. 55
3.4.1. Blocks ................................................................................................... 55
3.5. EquivalentModel1 .......................................................................................... 57
3.5.1. Blocks ................................................................................................... 57
3.6. Linear ............................................................................................................. 58
3.6.1. Blocks ................................................................................................... 58
3.7. Mode I ............................................................................................................ 60
3.7.1. Blocks ................................................................................................... 60
3.8. Model .............................................................................................................. 62
3.8.1. Blocks ................................................................................................... 62
3.9. Model .............................................................................................................. 69
3.9.1. Blocks ................................................................................................... 69
3.10. Model ............................................................................................................ 75
3.10.1. Blocks ................................................................................................. 75
3.11. Model ............................................................................................................ 76
3.11.1. Blocks ................................................................................................. 76
3.12. Sources ......................................................................................................... 79
3.12.1. Blocks ................................................................................................. 80
3.13. Yout .............................................................................................................. 82
3.13.1. Blocks ................................................................................................. 82
4. Requirements Traceability ........................................................................................ 96
5. System Model Configuration ..................................................................................... 97
6. Glossary ................................................................................................................... 125
7. About this Report .................................................................................................... 126
7.1. Report Overview .......................................................................................... 126
7.2. Root System Description ............................................................................... 126
7.3. Subsystem Descriptions ................................................................................ 127
7.4. State Chart Descriptions ............................................................................... 127
iii
List of Figures
2.1. DTR_paper_LVDS ...................................................................................................... 2
3.1. DTR_paper_LVDS/3-phase Instantaneous Active & Reactive Power1 ...................... 35
3.2. DTR_paper_LVDS/Discrete RMS value1/Discrete Mean value ................................. 43
3.3. DTR_paper_LVDS/Discrete RMS value1 .................................................................. 52
3.4. DTR_paper_LVDS/Discrete RMS value1/Discrete Mean value/Discrete Variable
Transport Delay ............................................................................................................ 55
3.5. DTR_paper_LVDS/powergui/EquivalentModel1 ...................................................... 57
3.6. DTR_paper_LVDS/3ph Transformer 63KVA/Model/Linear ...................................... 58
3.7. DTR_paper_LVDS/Three-Phase V-I Measurement1/Mode I ..................................... 60
3.8. DTR_paper_LVDS/3ph Transformer 63KVA/Model ................................................. 62
3.9. DTR_paper_LVDS/Three-Phase V-I Measurement1/Model ...................................... 69
3.10. DTR_paper_LVDS/Three-Phase V-I Measurement1/Model/I A:/Model ................... 75
3.11. DTR_paper_LVDS/Three-Phase Source1/Model ..................................................... 76
3.12. DTR_paper_LVDS/powergui/EquivalentModel1/Sources ....................................... 79
3.13. DTR_paper_LVDS/powergui/EquivalentModel1/Yout ............................................ 82
iv
List of Tables
2.1. "3ph Transformer 63KVA" Parameters .................................................................... 2
2.2. "5 pole R" Parameters .............................................................................................. 3
2.3. "5 pole R1" Parameters ............................................................................................ 3
2.4. "5 pole R2" Parameters ............................................................................................ 4
2.5. "5 pole R3" Parameters ............................................................................................ 4
2.6. "5 pole R4" Parameters ............................................................................................ 4
2.7. "5 pole R5" Parameters ............................................................................................ 4
2.8. "5 pole R6" Parameters ............................................................................................ 5
2.9. "Actve power1" Parameters ..................................................................................... 5
2.10. "Actve power2" Parameters ................................................................................... 5
2.11. "Actve power3" Parameters ................................................................................... 5
2.12. "Actve power4" Parameters ................................................................................... 6
2.13. "Actve power5" Parameters ................................................................................... 6
2.14. "Actve power6" Parameters ................................................................................... 6
2.15. "Actve power7" Parameters ................................................................................... 6
2.16. "Actve power8" Parameters ................................................................................... 7
2.17. "Actve power9" Parameters ................................................................................... 7
2.18. "Add" Parameters ................................................................................................... 7
2.19. "Add1" Parameters ................................................................................................. 8
2.20. "Cn 1- 3ph 10 HP1" Parameters .............................................................................. 8
2.21. "Cn 1- 3ph 10 HP2" Parameters .............................................................................. 9
2.22. "Cn 1- 3ph 5 HP2" Parameters ............................................................................... 9
2.23. "Cn 1- 3ph 5 HP4" Parameters .............................................................................. 10
2.24. "Cn 1- 3ph 5 HP5" Parameters .............................................................................. 10
2.25. "Cn 1- 3ph 5 HP6" Parameters .............................................................................. 11
2.26. "Cn 1- 3ph 7.5 HP3" Parameters ........................................................................... 11
2.27. "Demux1" Parameters .......................................................................................... 12
2.28. "Demux2" Parameters .......................................................................................... 12
2.29. "Demux3" Parameters .......................................................................................... 12
2.30. "Demux4" Parameters .......................................................................................... 13
2.31. "Demux5" Parameters .......................................................................................... 13
2.32. "Demux6" Parameters .......................................................................................... 13
2.33. "Demux7" Parameters .......................................................................................... 13
2.34. "Demux8" Parameters .......................................................................................... 14
2.35. "Demux9" Parameters .......................................................................................... 14
2.36. "Discrete RMS value1" Parameters ....................................................................... 14
2.37. "Discrete RMS value3" Parameters ....................................................................... 14
2.38. "Loss" Parameters ................................................................................................ 15
2.39. "powergui" Parameters ........................................................................................ 15
2.40. "RMS1" Parameters .............................................................................................. 16
2.41. "RMS11" Parameters ............................................................................................. 16
2.42. "RMS13" Parameters ............................................................................................. 16
2.43. "RMS3" Parameters .............................................................................................. 16
2.44. "RMS5" Parameters .............................................................................................. 17
2.45. "RMS7" Parameters .............................................................................................. 17
2.46. "RMS9" Parameters .............................................................................................. 17
2.47. "Three-Phase V-I Measurement1" Parameters ...................................................... 17
2.48. "Three-Phase V-I Measurement2" Parameters ...................................................... 18
2.49. "Three-Phase Source1" Parameters ...................................................................... 18
2.50. "Transformer loss" Parameters ............................................................................ 19
2.51. "V-I Measurement" Parameters ............................................................................ 19
v
DTR_paper_LVDS
vi
DTR_paper_LVDS
vii
DTR_paper_LVDS
viii
DTR_paper_LVDS
ix
Chapter 1. Model Version
Version: 1.2
1
Chapter 2. Root System
Table of Contents
2.1. Blocks ....................................................................................................................... 2
2.1.1. Parameters .................................................................................................... 2
2.1.2. Block Execution Order ................................................................................. 22
Figure 2.1. DTR_paper_LVDS
0
Discrete
5e+04 s.
RMS 0
3-phase (discrete)
Instantaneous
Active & Reactive Power1 Actve power6
Discrete
RMS value3
Vabc
PQ
Iabc
3-phase
0
Instantaneous RMS
Active & Reactive Power2 (discrete) 0 Actve power1
Vabc
Discrete
PQ RMS value1 Actve power2 Vabc
RMS
Iabc PQ (discrete)
Vabc Iabc
A
Iabc RMS1
B a
A Power1
b
C
c B
V-I C
Measurement Cn 1-
3ph 10 HP2
0
A Vabc Vabc
A A
Iabc
Iabc 5 pole R
B B a A a Actve power3
C
b B b B a A a
C c CD 1 Yg
c
b B b RMS
Three-Phase Source1 Three-Phase 3ph C
c C c Vabc (discrete)
V-I Measurement2 Transformer PQ
Three-Phase Iabc RMS3
63KVA 5 pole R1 A Vabc
V-I Measurement1 Iabc 0
A a B a Power2
A
B b
b B
C c Actve power4
C RMS 0
C c Vabc
V-I Measurement1 Cn 1- PQ (discrete)
Iabc Loss
3ph 10 HP1 RMS5
5 pole R2 A Vabc
Iabc Power3
A a B a A
b
B b C c B 0
C
C c V-I Measurement2
Cn 1- Actve power5
A Vabc
3ph Vabc
5 HP2 RMS Add
5 pole R3 Iabc PQ (discrete)
B a Iabc
A a b RMS7
B b C c A Power4
C c V-I Measurement3 B
C
Cn 1-
3ph 7.5 HP3 0
5 pole R4 Vabc
RMS
A Vabc PQ (discrete) Actve power7
A a Iabc Iabc
B b B a RMS9
C c
b Power5
C c
V-I Measurement4
A
5 pole R5 B
A a C
B b Cn 1-
3ph 5 HP4
C c A Vabc RMS 0
Vabc
Iabc (discrete)
B a PQ
b Iabc Actve power8
C c RMS11
A Power6
V-I Measurement5
B
C
Cn 1-
3ph 5 HP5
5 pole R6 RMS 0
Vabc
A a A Vabc PQ (discrete)
Iabc Iabc Actve power9
B b B a RMS13
C c b Power7
C c
V-I Measurement6 A
B
C
Cn 1-
3ph 5 HP6
2.1. Blocks
2.1.1. Parameters
2
Root System
Parameter Value
Simulate saturation off
Measurements None
Units pu
Nominal power and [ 63e3 , 50 ]
frequency [ Pn(VA) ,
fn(Hz) ]
Winding 1 paramete- [11000 0.002 0.080002]
rs [ V1 Ph-Ph(Vrms) ,
R1(pu) , L1(pu) ]
Winding 2 paramete- [440 0.002 0.08]
rs [ V2 Ph-Ph(Vrms) ,
R2(pu) , L2(pu) ]
Magnetization resist- 500.01
ance Rm (pu)
Magnetization induc- 500
tance Lm (pu)
Inductance L0 of zer- 0.5
o-sequence flux path
return (pu)
Saturation characte- [0 0;0.0024 1.2;1 1.52]
ristic [ i1 , phi1 ; i2 ,
phi2 ; ... ] (pu)
Initial fluxes [ phi0A , [-0.863877761492736 0.025377909830283 0.838499851664904]
phi0B , phi0C ] (pu)
Break Algebraic loop off
in discrete saturation
model
3
Root System
Parameter Value
Resistance R (Ohms) 0.5879*0.24
Measurements None
4
Root System
Parameter Value
Measurements None
5
Root System
Parameter Value
Floating display off
6
Root System
2.1.1.18. "Add" (Sum)
Table 2.18. "Add" Parameters
Parameter Value
Icon shape rectangular
List of signs +-------
Sum over All dimensions
Dimension 1
Require all inputs to off
have the same data
type
Accumulator data ty- Inherit: Inherit via internal rule
pe
Output minimum []
Output maximum []
Output data type Inherit: Inherit via internal rule
Lock data type settin- off
gs against changes by
the fixed-point tools
Integer rounding mo- Floor
de
Saturate on integer off
overflow
7
Root System
Parameter Value
Sample time (-1 for -1
inherited)
2.1.1.19. "Add1" (Sum)
Table 2.19. "Add1" Parameters
Parameter Value
Icon shape rectangular
List of signs +-
Sum over All dimensions
Dimension 1
Require all inputs to off
have the same data
type
Accumulator data ty- Inherit: Inherit via internal rule
pe
Output minimum []
Output maximum []
Output data type Inherit: Inherit via internal rule
Lock data type settin- off
gs against changes by
the fixed-point tools
Integer rounding mo- Floor
de
Saturate on integer off
overflow
Sample time (-1 for -1
inherited)
8
Root System
Parameter Value
Active power P (W) 7.4e3
Inductive reactive 5.55e3
power QL (positive
var)
Capacitive reactive 0
power Qc (negative
var)
Measurements None
Load type constant Z
9
Root System
Parameter Value
Specify PQ powers off
for each phase
Active power P (W) 3.73e3
Inductive reactive 2.31e3
power QL (positive
var)
Capacitive reactive 0
power Qc (negative
var)
Measurements None
Load type constant Z
10
Root System
Parameter Value
Nominal frequency 50
fn (Hz)
Specify PQ powers off
for each phase
Active power P (W) 5.595e3
Inductive reactive 3.47e3
power QL (positive
var)
Capacitive reactive 0
power Qc (negative
var)
Measurements None
Load type constant Z
11
Root System
Parameter Value
Nominal phase-to-ph- 440
ase voltage Vn (Vrms)
Nominal frequency 50
fn (Hz)
Specify PQ powers off
for each phase
Active power P (W) 5.595e3
Inductive reactive 3.47e3
power QL (positive
var)
Capacitive reactive 0
power Qc (negative
var)
Measurements None
Load type constant Z
2.1.1.27. "Demux1" (Demux)
Table 2.27. "Demux1" Parameters
Parameter Value
Number of outputs 2
Display option bar
Bus selection mode off
2.1.1.28. "Demux2" (Demux)
Table 2.28. "Demux2" Parameters
Parameter Value
Number of outputs 2
Display option bar
Bus selection mode off
2.1.1.29. "Demux3" (Demux)
Table 2.29. "Demux3" Parameters
Parameter Value
Number of outputs 2
12
Root System
Parameter Value
Display option bar
Bus selection mode off
2.1.1.30. "Demux4" (Demux)
Table 2.30. "Demux4" Parameters
Parameter Value
Number of outputs 2
Display option bar
Bus selection mode off
2.1.1.31. "Demux5" (Demux)
Table 2.31. "Demux5" Parameters
Parameter Value
Number of outputs 2
Display option bar
Bus selection mode off
2.1.1.32. "Demux6" (Demux)
Table 2.32. "Demux6" Parameters
Parameter Value
Number of outputs 2
Display option bar
Bus selection mode off
2.1.1.33. "Demux7" (Demux)
Table 2.33. "Demux7" Parameters
Parameter Value
Number of outputs 2
Display option bar
Bus selection mode off
13
Root System
2.1.1.34. "Demux8" (Demux)
Table 2.34. "Demux8" Parameters
Parameter Value
Number of outputs 2
Display option bar
Bus selection mode off
2.1.1.35. "Demux9" (Demux)
Table 2.35. "Demux9" Parameters
Parameter Value
Number of outputs 2
Display option bar
Bus selection mode off
14
Root System
2.1.1.38. "Loss" (Display)
Table 2.38. "Loss" Parameters
Parameter Value
Format short
Decimation 1
Floating display off
2.1.1.39. "powergui" (SubSystem)
Table 2.39. "powergui" Parameters
Parameter Value
Simulation type Discrete
Sample time (s) 50000
Max iterations 50
Frequency (Hz) 50
Base power (VA) 100e6
PQ tolerance (pu) 1e-4
Voltage units kV
Power units MW
Disable Simscape Po- off
wer Systems ST war-
nings
Display Simscape Po- off
wer Systems ST com-
pilation messages
Use TLC file when in off
Accelerator Simulat-
ion Mode and for co-
de generation
Discrete solver Tustin
Interpolate switching off
events
Store switching topo- off
logies.
Start simulation with blocks
initial electrical stat-
es from
15
Root System
2.1.1.40. "RMS1" (SubSystem)
Table 2.40. "RMS1" Parameters
Parameter Value
Fundamental freque- 50
ncy (Hz)
Initial magnitude of 0
input
Sample time 5e-6
2.1.1.41. "RMS11" (SubSystem)
Table 2.41. "RMS11" Parameters
Parameter Value
Fundamental freque- 50
ncy (Hz)
Initial magnitude of 0
input
Sample time 5e-6
2.1.1.42. "RMS13" (SubSystem)
Table 2.42. "RMS13" Parameters
Parameter Value
Fundamental freque- 50
ncy (Hz)
Initial magnitude of 0
input
Sample time 5e-6
2.1.1.43. "RMS3" (SubSystem)
Table 2.43. "RMS3" Parameters
Parameter Value
Fundamental freque- 50
ncy (Hz)
Initial magnitude of 0
input
Sample time 5e-6
16
Root System
2.1.1.44. "RMS5" (SubSystem)
Table 2.44. "RMS5" Parameters
Parameter Value
Fundamental freque- 50
ncy (Hz)
Initial magnitude of 0
input
Sample time 5e-6
2.1.1.45. "RMS7" (SubSystem)
Table 2.45. "RMS7" Parameters
Parameter Value
Fundamental freque- 50
ncy (Hz)
Initial magnitude of 0
input
Sample time 5e-6
2.1.1.46. "RMS9" (SubSystem)
Table 2.46. "RMS9" Parameters
Parameter Value
Fundamental freque- 50
ncy (Hz)
Initial magnitude of 0
input
Sample time 5e-6
17
Root System
Parameter Value
Use a label off
Voltages in pu, based off
on peak value of no-
minal phase-to-grou-
nd voltage
Current measureme- yes
nt
Use a label off
Currents in pu off
Output signals in Complex
18
Root System
Parameter Value
Frequency (Hz) 50
Internal on
Specify short-circuit on
level parameters
3-phase short-circuit 100e6
level at base voltage(-
VA)
Base voltage (Vrms 11e3
ph-ph)
X/R ratio 7
Generator type swing
19
Root System
20
Root System
Parameter Value
Use a label off
Voltages in pu, based off
on peak value of no-
minal phase-to-grou-
nd voltage
Current measureme- yes
nt
Use a label off
Currents in pu off
Output signals in Complex
21
Root System
Parameter Value
Current measureme- yes
nt
Use a label off
Currents in pu off
Output signals in Complex
22
Root System
23
Root System
71. K1 (Constant)
72. S-Function (S-Function)
73. Sum7 (Sum)
74. K2 (Constant)
75. Product (Product)
76. Gain1 (Gain)
77. Unit Delay (UnitDelay)
78. Gain (Gain)
79. Step (Step)
80. Constant (Constant)
81. TmpAtomicSubsysAtSwitchInport1
1. Sum1 (Sum)
2. Sum5 (Sum)
82. Switch (Switch)
83. Saturation Ajout P.B pour eviter sqrt(negatif) (Saturate)
84. Sqrt (Sqrt)
85. Actve power3 [5] (Display)
86. do not delete this gain (Gain)
87. do not delete this gain (Gain)
88. do not delete this gain (Gain)
89. Kv1 (Gain)
90. do not delete this gain (Gain)
91. do not delete this gain (Gain)
92. do not delete this gain (Gain)
93. Kv (Gain)
94. Product1 (Product)
95. Sum4 (Sum)
96. Product (Product)
97. Integ4 (DiscreteIntegrator)
98. K1 (Constant)
99. S-Function (S-Function)
100. Sum7 (Sum)
101. K2 (Constant)
102. Product (Product)
103. Gain1 (Gain)
104. Unit Delay (UnitDelay)
105. Gain (Gain)
106. Step (Step)
107. Constant (Constant)
108. TmpAtomicSubsysAtSwitchInport1
1. Sum1 (Sum)
2. Sum5 (Sum)
109. Switch (Switch)
110. Saturation Ajout P.B pour eviter sqrt(negatif) (Saturate)
111. Sqrt (Sqrt)
112. Actve power4 [6] (Display)
113. do not delete this gain (Gain)
114. do not delete this gain (Gain)
115. do not delete this gain (Gain)
116. Kv1 (Gain)
117. do not delete this gain (Gain)
118. do not delete this gain (Gain)
119. do not delete this gain (Gain)
120. Kv (Gain)
24
Root System
25
Root System
26
Root System
27
Root System
28
Root System
327. + (PMIOPort)
328. - (PMIOPort)
329. CurrentMeasurement (PMComponent)
330. + (PMIOPort)
331. - (PMIOPort)
332. CurrentMeasurement (PMComponent)
333. + (PMIOPort)
334. - (PMIOPort)
335. CurrentMeasurement (PMComponent)
336. + (PMIOPort)
337. - (PMIOPort)
338. Ground (PMComponent)
339. Multimeter (PMComponent)
340. Multimeter1 (PMComponent)
341. Multimeter2 (PMComponent)
342. A (PMIOPort)
343. B (PMIOPort)
344. C (PMIOPort)
345. a (PMIOPort)
346. b (PMIOPort)
347. c (PMIOPort)
348. A (PMIOPort)
349. B (PMIOPort)
350. C (PMIOPort)
351. a (PMIOPort)
352. b (PMIOPort)
353. c (PMIOPort)
354. VoltageMeasurement (PMComponent)
355. + (PMIOPort)
356. - (PMIOPort)
357. VoltageMeasurement (PMComponent)
358. + (PMIOPort)
359. - (PMIOPort)
360. VoltageMeasurement (PMComponent)
361. + (PMIOPort)
362. - (PMIOPort)
363. CurrentMeasurement (PMComponent)
364. + (PMIOPort)
365. - (PMIOPort)
366. CurrentMeasurement (PMComponent)
367. + (PMIOPort)
368. - (PMIOPort)
369. CurrentMeasurement (PMComponent)
370. + (PMIOPort)
371. - (PMIOPort)
372. Ground (PMComponent)
373. Multimeter (PMComponent)
374. Multimeter1 (PMComponent)
375. Multimeter2 (PMComponent)
376. A (PMIOPort)
377. B (PMIOPort)
378. C (PMIOPort)
379. a (PMIOPort)
380. b (PMIOPort)
29
Root System
381. c (PMIOPort)
382. A (PMIOPort)
383. B (PMIOPort)
384. C (PMIOPort)
385. a (PMIOPort)
386. b (PMIOPort)
387. c (PMIOPort)
388. VoltageMeasurement (PMComponent)
389. + (PMIOPort)
390. - (PMIOPort)
391. VoltageMeasurement (PMComponent)
392. + (PMIOPort)
393. - (PMIOPort)
394. VoltageMeasurement (PMComponent)
395. + (PMIOPort)
396. - (PMIOPort)
397. CurrentMeasurement (PMComponent)
398. + (PMIOPort)
399. - (PMIOPort)
400. CurrentMeasurement (PMComponent)
401. + (PMIOPort)
402. - (PMIOPort)
403. CurrentMeasurement (PMComponent)
404. + (PMIOPort)
405. - (PMIOPort)
406. Ground (PMComponent)
407. Multimeter (PMComponent)
408. Multimeter1 (PMComponent)
409. Multimeter2 (PMComponent)
410. A (PMIOPort)
411. B (PMIOPort)
412. C (PMIOPort)
413. a (PMIOPort)
414. b (PMIOPort)
415. c (PMIOPort)
416. A (PMIOPort)
417. B (PMIOPort)
418. C (PMIOPort)
419. a (PMIOPort)
420. b (PMIOPort)
421. c (PMIOPort)
422. VoltageMeasurement (PMComponent)
423. + (PMIOPort)
424. - (PMIOPort)
425. VoltageMeasurement (PMComponent)
426. + (PMIOPort)
427. - (PMIOPort)
428. VoltageMeasurement (PMComponent)
429. + (PMIOPort)
430. - (PMIOPort)
431. CurrentMeasurement (PMComponent)
432. + (PMIOPort)
433. - (PMIOPort)
434. CurrentMeasurement (PMComponent)
30
Root System
435. + (PMIOPort)
436. - (PMIOPort)
437. CurrentMeasurement (PMComponent)
438. + (PMIOPort)
439. - (PMIOPort)
440. Ground (PMComponent)
441. Multimeter (PMComponent)
442. Multimeter1 (PMComponent)
443. Multimeter2 (PMComponent)
444. A (PMIOPort)
445. B (PMIOPort)
446. C (PMIOPort)
447. a (PMIOPort)
448. b (PMIOPort)
449. c (PMIOPort)
450. A (PMIOPort)
451. B (PMIOPort)
452. C (PMIOPort)
453. a (PMIOPort)
454. b (PMIOPort)
455. c (PMIOPort)
456. VoltageMeasurement (PMComponent)
457. + (PMIOPort)
458. - (PMIOPort)
459. VoltageMeasurement (PMComponent)
460. + (PMIOPort)
461. - (PMIOPort)
462. VoltageMeasurement (PMComponent)
463. + (PMIOPort)
464. - (PMIOPort)
465. CurrentMeasurement (PMComponent)
466. + (PMIOPort)
467. - (PMIOPort)
468. CurrentMeasurement (PMComponent)
469. + (PMIOPort)
470. - (PMIOPort)
471. CurrentMeasurement (PMComponent)
472. + (PMIOPort)
473. - (PMIOPort)
474. Ground (PMComponent)
475. Multimeter (PMComponent)
476. Multimeter1 (PMComponent)
477. Multimeter2 (PMComponent)
478. A (PMIOPort)
479. B (PMIOPort)
480. C (PMIOPort)
481. a (PMIOPort)
482. b (PMIOPort)
483. c (PMIOPort)
484. A (PMIOPort)
485. B (PMIOPort)
486. C (PMIOPort)
487. a (PMIOPort)
488. b (PMIOPort)
31
Root System
489. c (PMIOPort)
490. VoltageMeasurement (PMComponent)
491. + (PMIOPort)
492. - (PMIOPort)
493. VoltageMeasurement (PMComponent)
494. + (PMIOPort)
495. - (PMIOPort)
496. VoltageMeasurement (PMComponent)
497. + (PMIOPort)
498. - (PMIOPort)
499. CurrentMeasurement (PMComponent)
500. + (PMIOPort)
501. - (PMIOPort)
502. CurrentMeasurement (PMComponent)
503. + (PMIOPort)
504. - (PMIOPort)
505. CurrentMeasurement (PMComponent)
506. + (PMIOPort)
507. - (PMIOPort)
508. Ground (PMComponent)
509. Multimeter (PMComponent)
510. Multimeter1 (PMComponent)
511. Multimeter2 (PMComponent)
512. A (PMIOPort)
513. B (PMIOPort)
514. C (PMIOPort)
515. a (PMIOPort)
516. b (PMIOPort)
517. c (PMIOPort)
518. A (PMIOPort)
519. B (PMIOPort)
520. C (PMIOPort)
521. a (PMIOPort)
522. b (PMIOPort)
523. c (PMIOPort)
524. VoltageMeasurement (PMComponent)
525. + (PMIOPort)
526. - (PMIOPort)
527. VoltageMeasurement (PMComponent)
528. + (PMIOPort)
529. - (PMIOPort)
530. VoltageMeasurement (PMComponent)
531. + (PMIOPort)
532. - (PMIOPort)
533. CurrentMeasurement (PMComponent)
534. + (PMIOPort)
535. - (PMIOPort)
536. CurrentMeasurement (PMComponent)
537. + (PMIOPort)
538. - (PMIOPort)
539. CurrentMeasurement (PMComponent)
540. + (PMIOPort)
541. - (PMIOPort)
542. Ground (PMComponent)
32
Root System
33
Chapter 3. Subsystems
Table of Contents
3.1. 3-phase Instantaneous Active & Reactive Power1 .................................................. 35
3.1.1. Blocks .......................................................................................................... 35
3.2. Discrete Mean value ............................................................................................... 43
3.2.1. Blocks .......................................................................................................... 43
3.3. Discrete RMS value1 .............................................................................................. 52
3.3.1. Blocks .......................................................................................................... 52
3.4. Discrete Variable Transport Delay ......................................................................... 55
3.4.1. Blocks .......................................................................................................... 55
3.5. EquivalentModel1 .................................................................................................. 57
3.5.1. Blocks .......................................................................................................... 57
3.6. Linear ..................................................................................................................... 58
3.6.1. Blocks .......................................................................................................... 58
3.7. Mode I .................................................................................................................... 60
3.7.1. Blocks .......................................................................................................... 60
3.8. Model ..................................................................................................................... 62
3.8.1. Blocks .......................................................................................................... 62
3.9. Model ..................................................................................................................... 69
3.9.1. Blocks .......................................................................................................... 69
3.10. Model .................................................................................................................... 75
3.10.1. Blocks ......................................................................................................... 75
3.11. Model .................................................................................................................... 76
3.11.1. Blocks ......................................................................................................... 76
3.12. Sources ................................................................................................................. 79
3.12.1. Blocks ......................................................................................................... 80
3.13. Yout ...................................................................................................................... 82
3.13.1. Blocks ......................................................................................................... 82
34
Subsystems
This block computes the 3-phase instantaneous real power and reactive power using the following equations:
1
Vabc P
P 1
2
PQ
Iabc
Demux
1/sqrt(3)
Q
3.1.1. Blocks
3.1.1.1. Parameters
3.1.1.1.1. "Demux" (Demux)
Table 3.1. "Demux" Parameters
Parameter Value
Number of outputs 3
Display option none
Bus selection mode off
35
Subsystems
3.1.1.1.2. "Iabc" (Inport)
Table 3.2. "Iabc" Parameters
Parameter Value
Port number 2
Port dimensions (-1 3
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
3.1.1.1.3. "Mux" (Mux)
Table 3.3. "Mux" Parameters
Parameter Value
Number of inputs 3
Display option bar
3.1.1.1.4. "Mux1" (Mux)
Table 3.4. "Mux1" Parameters
Parameter Value
Number of inputs 2
Display option bar
3.1.1.1.5. "PQ" (Outport)
Table 3.5. "PQ" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
36
Subsystems
Parameter Value
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
MustResolveToSigna- off
lObject
3.1.1.1.6. "Product1" (Product)
Table 3.6. "Product1" Parameters
Parameter Value
Number of inputs 2
Multiplication Element-wise(.*)
Multiply over All dimensions
Dimension 1
Require all inputs to on
have the same data
type
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock output data ty- off
pe setting against
37
Subsystems
Parameter Value
changes by the fixe-
d-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
3.1.1.1.7. "Product3" (Product)
Table 3.7. "Product3" Parameters
Parameter Value
Number of inputs 2
Multiplication Element-wise(.*)
Multiply over All dimensions
Dimension 1
Require all inputs to on
have the same data
type
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
3.1.1.1.8. "pu->V" (Gain)
Table 3.8. "pu->V" Parameters
Parameter Value
Gain 1/sqrt(3)
38
Subsystems
Parameter Value
Multiplication Element-wise(K.*u)
Parameter minimum []
Parameter maximum []
Parameter data type Inherit: Same as input
Output minimum []
Output maximum []
Output data type Inherit: Same as input
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
3.1.1.1.9. "Sum" (Sum)
Table 3.9. "Sum" Parameters
Parameter Value
Icon shape rectangular
List of signs +-
Sum over All dimensions
Dimension 1
Require all inputs to on
have the same data
type
Accumulator data ty- Inherit: Inherit via internal rule
pe
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock data type settin- off
gs against changes by
the fixed-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
39
Subsystems
Parameter Value
Sample time (-1 for -1
inherited)
3.1.1.1.10. "Sum1" (Sum)
Table 3.10. "Sum1" Parameters
Parameter Value
Icon shape round
List of signs 1
Sum over All dimensions
Dimension 1
Require all inputs to on
have the same data
type
Accumulator data ty- Inherit: Inherit via internal rule
pe
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock data type settin- off
gs against changes by
the fixed-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
3.1.1.1.11. "Sum4" (Sum)
Table 3.11. "Sum4" Parameters
Parameter Value
Icon shape round
List of signs 1
Sum over All dimensions
Dimension 1
40
Subsystems
Parameter Value
Require all inputs to on
have the same data
type
Accumulator data ty- Inherit: Inherit via internal rule
pe
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock data type settin- off
gs against changes by
the fixed-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
3.1.1.1.12. "Sum5" (Sum)
Table 3.12. "Sum5" Parameters
Parameter Value
Icon shape rectangular
List of signs +-
Sum over All dimensions
Dimension 1
Require all inputs to on
have the same data
type
Accumulator data ty- Inherit: Inherit via internal rule
pe
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock data type settin- off
gs against changes by
the fixed-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
41
Subsystems
Parameter Value
Sample time (-1 for -1
inherited)
3.1.1.1.13. "Sum6" (Sum)
Table 3.13. "Sum6" Parameters
Parameter Value
Icon shape rectangular
List of signs +-
Sum over All dimensions
Dimension 1
Require all inputs to on
have the same data
type
Accumulator data ty- Inherit: Inherit via internal rule
pe
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock data type settin- off
gs against changes by
the fixed-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
3.1.1.1.14. "Vabc" (Inport)
Table 3.14. "Vabc" Parameters
Parameter Value
Port number 1
Port dimensions (-1 3
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
42
Subsystems
Parameter Value
Data type Inherit: auto
Discrete Variable
Transport Delay
K Ts (z+1)
1 In
In 2(z-1) Out
In D
Step
Mean value
Delay Freq
1
Vinit Mean
Correction
K2
Correction
K1
3.2.1. Blocks
3.2.1.1. Parameters
3.2.1.1.1. "Constant" (Constant)
Table 3.15. "Constant" Parameters
Parameter Value
Constant value Vinit
Interpret vector par- on
ameters as 1-D
Output minimum []
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Sample time Ts
Frame period inf
43
Subsystems
3.2.1.1.3. "Gain" (Gain)
Table 3.17. "Gain" Parameters
Parameter Value
Gain K1
Multiplication Element-wise(K.*u)
Parameter minimum []
Parameter maximum []
Parameter data type Inherit: Same as input
Output minimum []
Output maximum []
Output data type Inherit: Same as input
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
3.2.1.1.4. "Gain1" (Gain)
Table 3.18. "Gain1" Parameters
Parameter Value
Gain K2
Multiplication Element-wise(K.*u)
Parameter minimum []
Parameter maximum []
Parameter data type Inherit: Same as input
Output minimum []
44
Subsystems
Parameter Value
Output maximum []
Output data type Inherit: Same as input
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
3.2.1.1.5. "In" (Inport)
Table 3.19. "In" Parameters
Parameter Value
Port number 1
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
3.2.1.1.6. "Integ4" (DiscreteIntegrator)
Table 3.20. "Integ4" Parameters
Parameter Value
Integrator method Integration: Trapezoidal
Gain value 1.0
External reset none
Initial condition sou- internal
rce
Initial condition 0
Initial condition sett- Output
ing
Sample time (-1 for Ts
inherited)
45
Subsystems
Parameter Value
Output minimum []
Output maximum []
Output data type Inherit: Inherit via internal rule
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Integer rounding mo- Floor
de
Saturate on integer off
overflow
Limit output off
Upper saturation lim- inf
it
Lower saturation li- -inf
mit
Show saturation port off
Show state port off
Ignore limit and reset off
when linearizing
State name must res- off
olve to Simulink sign-
al object
3.2.1.1.7. "K1" (Constant)
Table 3.21. "K1" Parameters
Parameter Value
Constant value Delay
Interpret vector par- on
ameters as 1-D
Output minimum []
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Sample time Ts
Frame period inf
46
Subsystems
3.2.1.1.8. "K2" (Constant)
Table 3.22. "K2" Parameters
Parameter Value
Constant value Freq
Interpret vector par- on
ameters as 1-D
Output minimum []
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Sample time Ts
Frame period inf
3.2.1.1.9. "Mean" (Outport)
Table 3.23. "Mean" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
47
Subsystems
Parameter Value
Output when disabl- held
ed
Initial output []
MustResolveToSigna- off
lObject
3.2.1.1.10. "Product" (Product)
Table 3.24. "Product" Parameters
Parameter Value
Number of inputs 2
Multiplication Element-wise(.*)
Multiply over All dimensions
Dimension 1
Require all inputs to on
have the same data
type
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
3.2.1.1.11. "Step" (Step)
Table 3.25. "Step" Parameters
Parameter Value
Step time 1/Freq
Initial value 0
Final value 1
Sample time Ts
Interpret vector par- on
ameters as 1-D
48
Subsystems
Parameter Value
Enable zero-crossing on
detection
3.2.1.1.12. "Sum1" (Sum)
Table 3.26. "Sum1" Parameters
Parameter Value
Icon shape rectangular
List of signs +-
Sum over All dimensions
Dimension 1
Require all inputs to on
have the same data
type
Accumulator data ty- Inherit: Inherit via internal rule
pe
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock data type settin- off
gs against changes by
the fixed-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
3.2.1.1.13. "Sum5" (Sum)
Table 3.27. "Sum5" Parameters
Parameter Value
Icon shape rectangular
List of signs ++
Sum over All dimensions
Dimension 1
Require all inputs to on
have the same data
type
49
Subsystems
Parameter Value
Accumulator data ty- Inherit: Inherit via internal rule
pe
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock data type settin- off
gs against changes by
the fixed-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
3.2.1.1.14. "Sum7" (Sum)
Table 3.28. "Sum7" Parameters
Parameter Value
Icon shape rectangular
List of signs -+
Sum over All dimensions
Dimension 1
Require all inputs to on
have the same data
type
Accumulator data ty- Inherit: Inherit via internal rule
pe
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock data type settin- off
gs against changes by
the fixed-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
50
Subsystems
3.2.1.1.15. "Switch" (Switch)
Table 3.29. "Switch" Parameters
Parameter Value
Criteria for passing u2 >= Threshold
first input
Threshold 0.5
Require all data port on
inputs to have the sa-
me data type
Output minimum []
Output maximum []
Output data type Inherit: Inherit via internal rule
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Integer rounding mo- Floor
de
Saturate on integer off
overflow
Enable zero-crossing on
detection
Sample time (-1 for -1
inherited)
Allow different data off
input sizes (Results in
variable-size output
signal)
51
Subsystems
1
Mean 1
In (discrete)
Saturation Sqrt RMS
3.3.1. Blocks
3.3.1.1. Parameters
3.3.1.1.2. "In" (Inport)
Table 3.32. "In" Parameters
Parameter Value
Port number 1
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
52
Subsystems
Parameter Value
Data type Inherit: auto
3.3.1.1.3. "Product" (Product)
Table 3.33. "Product" Parameters
Parameter Value
Number of inputs 2
Multiplication Element-wise(.*)
Multiply over All dimensions
Dimension 1
Require all inputs to on
have the same data
type
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Sample time (-1 for -1
inherited)
3.3.1.1.4. "RMS" (Outport)
Table 3.34. "RMS" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
53
Subsystems
Parameter Value
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output 0
MustResolveToSigna- off
lObject
54
Subsystems
3.3.1.1.6. "Sqrt" (Sqrt)
Table 3.36. "Sqrt" Parameters
Parameter Value
Function sqrt
Sample time (-1 for -1
inherited)
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Integer rounding mo- Floor
de
Saturate on integer on
overflow
Intermediate results Inherit: Inherit via internal rule
data type
Method Newton-Raphson
Number of iterations 3
1
In discreteVariableTransportDelay 1
2 Out
D
S-Function
3.4.1. Blocks
3.4.1.1. Parameters
3.4.1.1.1. "D" (Inport)
Table 3.37. "D" Parameters
Parameter Value
Port number 2
55
Subsystems
Parameter Value
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
3.4.1.1.2. "In" (Inport)
Table 3.38. "In" Parameters
Parameter Value
Port number 1
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
3.4.1.1.3. "Out" (Outport)
Table 3.39. "Out" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
56
Subsystems
Parameter Value
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
MustResolveToSigna- off
lObject
3.5. EquivalentModel1
Figure 3.5. DTR_paper_LVDS/powergui/EquivalentModel1
u sfun_spssw_discc v,i
Sources Yout
State-Space
3.5.1. Blocks
3.5.1.1. Parameters
3.5.1.1.1. "State-Space" (S-Function)
Table 3.41. "State-Space" Parameters
Parameter Value
S-function name sfun_spssw_discc
57
Subsystems
Parameter Value
S-function paramete- S.Ts,S.A, S.B, S.C, S.D, S.x0,S.EnableUseOfTLC
rs
S-function modules ''
3.6. Linear
Figure 3.6. DTR_paper_LVDS/3ph Transformer 63KVA/Model/Linear
1 1
v i
2
f
X
2
gnd
3.6.1. Blocks
3.6.1.1. Parameters
3.6.1.1.1. "f" (Outport)
Table 3.42. "f" Parameters
Parameter Value
Port number 2
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 1
for inherited)
Variable-size signal Inherit
58
Subsystems
Parameter Value
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output 0
MustResolveToSigna- off
lObject
3.6.1.1.2. "i" (Outport)
Table 3.43. "i" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output 0
59
Subsystems
Parameter Value
MustResolveToSigna- off
lObject
3.6.1.1.3. "v" (Inport)
Table 3.44. "v" Parameters
Parameter Value
Port number 1
Port dimensions (-1 1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
3.6.1.1.4. "X" (Inport)
Table 3.45. "X" Parameters
Parameter Value
Port number 2
Port dimensions (-1 1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
3.7. Mode I
Figure 3.7. DTR_paper_LVDS/Three-Phase V-I Measurement1/Mode I
3.7.1. Blocks
3.7.1.1. Parameters
60
Subsystems
3.7.1.1.1. "In1" (Inport)
Table 3.46. "In1" Parameters
Parameter Value
Port number 1
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
3.7.1.1.2. "Out1" (Outport)
Table 3.47. "Out1" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
61
Subsystems
Parameter Value
MustResolveToSigna- off
lObject
3.8. Model
Figure 3.8. DTR_paper_LVDS/3ph Transformer 63KVA/Model
1 v i 1
In 1 Out1
4 X f 2
In4 Out2
Linear
2 v i 3
In2 Out3
5 X f 4
In5 Out4
Linear1
3 v i 5
In3 Out5
6 X f 6
In6 Out6
Linear2
3.8.1. Blocks
3.8.1.1. Parameters
3.8.1.1.1. "In1" (Inport)
Table 3.48. "In1" Parameters
Parameter Value
Port number 1
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
62
Subsystems
Parameter Value
Maximum []
Data type Inherit: auto
3.8.1.1.2. "In2" (Inport)
Table 3.49. "In2" Parameters
Parameter Value
Port number 2
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
3.8.1.1.3. "In3" (Inport)
Table 3.50. "In3" Parameters
Parameter Value
Port number 3
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
3.8.1.1.4. "In4" (Inport)
Table 3.51. "In4" Parameters
Parameter Value
Port number 4
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
63
Subsystems
Parameter Value
Maximum []
Data type Inherit: auto
3.8.1.1.5. "In5" (Inport)
Table 3.52. "In5" Parameters
Parameter Value
Port number 5
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
3.8.1.1.6. "In6" (Inport)
Table 3.53. "In6" Parameters
Parameter Value
Port number 6
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
3.8.1.1.7. "Out1" (Outport)
Table 3.54. "Out1" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
64
Subsystems
Parameter Value
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
MustResolveToSigna- off
lObject
3.8.1.1.8. "Out2" (Outport)
Table 3.55. "Out2" Parameters
Parameter Value
Port number 2
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
65
Subsystems
Parameter Value
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
MustResolveToSigna- off
lObject
3.8.1.1.9. "Out3" (Outport)
Table 3.56. "Out3" Parameters
Parameter Value
Port number 3
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
66
Subsystems
Parameter Value
MustResolveToSigna- off
lObject
3.8.1.1.10. "Out4" (Outport)
Table 3.57. "Out4" Parameters
Parameter Value
Port number 4
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
MustResolveToSigna- off
lObject
3.8.1.1.11. "Out5" (Outport)
Table 3.58. "Out5" Parameters
Parameter Value
Port number 5
67
Subsystems
Parameter Value
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
MustResolveToSigna- off
lObject
3.8.1.1.12. "Out6" (Outport)
Table 3.59. "Out6" Parameters
Parameter Value
Port number 6
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
68
Subsystems
Parameter Value
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
MustResolveToSigna- off
lObject
3.9. Model
Figure 3.9. DTR_paper_LVDS/Three-Phase V-I Measurement1/Model
powersysdomain
Multimeter
powersysdomain
Multimeter1 i
1 +
- 4
A +
v I A: a
-
U A: i
2 +
- 5
B + I B: b
v
-
U B: i
3 +
- 6
C I C: c
+
-
v powersysdomain
U C: Multimeter2
1 2
v i
3.9.1. Blocks
3.9.1.1. Parameters
69
Subsystems
3.9.1.1.1. "A" (PMIOPort)
Table 3.60. "A" Parameters
Parameter Value
Port number 1
Port location on pare- Left
nt subsystem
3.9.1.1.2. "a" (PMIOPort)
Table 3.61. "a" Parameters
Parameter Value
Port number 4
Port location on pare- Right
nt subsystem
3.9.1.1.3. "B" (PMIOPort)
Table 3.62. "B" Parameters
Parameter Value
Port number 2
Port location on pare- Left
nt subsystem
3.9.1.1.4. "b" (PMIOPort)
Table 3.63. "b" Parameters
Parameter Value
Port number 5
Port location on pare- Right
nt subsystem
3.9.1.1.5. "C" (PMIOPort)
Table 3.64. "C" Parameters
Parameter Value
Port number 3
Port location on pare- Left
nt subsystem
70
Subsystems
3.9.1.1.6. "c" (PMIOPort)
Table 3.65. "c" Parameters
Parameter Value
Port number 6
Port location on pare- Right
nt subsystem
3.9.1.1.7. "Ground" (PMComponent)
Table 3.66. "Ground" Parameters
Parameter Value
Physical Domain powersysdomain
Sub Class Name unknown
Left Port Type p1
Right Port Type p1
3.9.1.1.8. "i" (Outport)
Table 3.67. "i" Parameters
Parameter Value
Port number 2
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
71
Subsystems
Parameter Value
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
MustResolveToSigna- off
lObject
3.9.1.1.12. "Multimeter" (PMComponent)
Table 3.71. "Multimeter" Parameters
Parameter Value
PhysicalDomain powersysdomain
SubClassName unknown
LeftPortType p1
RightPortType p1
72
Subsystems
3.9.1.1.13. "Multimeter1" (PMComponent)
Table 3.72. "Multimeter1" Parameters
Parameter Value
PhysicalDomain powersysdomain
SubClassName unknown
LeftPortType p1
RightPortType p1
3.9.1.1.14. "Multimeter2" (PMComponent)
Table 3.73. "Multimeter2" Parameters
Parameter Value
PhysicalDomain powersysdomain
SubClassName unknown
LeftPortType p1
RightPortType p1
3.9.1.1.15. "Mux" (Mux)
Table 3.74. "Mux" Parameters
Parameter Value
Number of inputs 3
Display option bar
3.9.1.1.16. "Mux1" (Mux)
Table 3.75. "Mux1" Parameters
Parameter Value
Number of inputs 3
Display option bar
73
Subsystems
3.9.1.1.20. "v" (Outport)
Table 3.79. "v" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
74
Subsystems
Parameter Value
Initial output []
MustResolveToSigna- off
lObject
3.10. Model
Figure 3.10. DTR_paper_LVDS/Three-Phase V-I Measurement1/Model/I
A:/Model
1 1
signal
in out
3.10.1. Blocks
3.10.1.1. Parameters
3.10.1.1.1. "in" (Inport)
Table 3.80. "in" Parameters
Parameter Value
Port number 1
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
3.10.1.1.2. "out" (Outport)
Table 3.81. "out" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
75
Subsystems
Parameter Value
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
MustResolveToSigna- off
lObject
3.11. Model
Figure 3.11. DTR_paper_LVDS/Three-Phase Source1/Model
Sine Wave A
1
Out1
Sine Wave B
Sine Wave C
3.11.1. Blocks
3.11.1.1. Parameters
3.11.1.1.1. "Mux" (Mux)
Table 3.82. "Mux" Parameters
Parameter Value
Number of inputs 3
76
Subsystems
Parameter Value
Display option bar
3.11.1.1.2. "Out1" (Outport)
Table 3.83. "Out1" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
MustResolveToSigna- off
lObject
77
Subsystems
Parameter Value
Amplitude Aa
Bias 0
Frequency (rad/sec) 2*pi*Frequency
Phase (rad) Pa
Samples per period 10
Number of offset sa- 0
mples
Sample time Ts
Interpret vector par- on
ameters as 1-D
78
Subsystems
Parameter Value
Samples per period 10
Number of offset sa- 0
mples
Sample time Ts
Interpret vector par- on
ameters as 1-D
3.12. Sources
Figure 3.12. DTR_paper_LVDS/powergui/EquivalentModel1/Sources
-T-
From1
1
u
Mux
79
Subsystems
3.12.1. Blocks
3.12.1.1. Parameters
3.12.1.1.1. "From1" (From)
Table 3.87. "From1" Parameters
Parameter Value
Goto tag T39_3528_2497418127868
Icon display Tag
3.12.1.1.2. "Mux" (Mux)
Table 3.88. "Mux" Parameters
Parameter Value
Number of inputs 1
Display option bar
3.12.1.1.3. "u" (Outport)
Table 3.89. "u" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data ty- off
pe setting against
changes by the fixe-
d-point tools
Output as nonvirtual off
bus in parent model
Unit (e.g., m, m/s^2, inherit
N*m)
Port dimensions (-1 -1
for inherited)
80
Subsystems
Parameter Value
Variable-size signal Inherit
Sample time (-1 for -1
inherited)
Ensure outport is vir- off
tual
Source of initial outp- Dialog
ut value
Output when disabl- held
ed
Initial output []
MustResolveToSigna- off
lObject
81
Subsystems
3.13. Yout
Figure 3.13. DTR_paper_LVDS/powergui/EquivalentModel1/Yout
-T-
Goto1
-T-
Goto2
-T-
Goto3
-T-
Goto4
-T-
Goto5
-T-
Goto6
-T-
Goto7
-T-
Goto8
1
v,i -T-
Goto9
-T-
Goto10
-T-
Goto11
-T-
Goto12
-T-
Goto13
-T-
Goto14
-T-
Goto15
-T-
Goto16
-T-
Goto17
-T-
Goto18
-T-
Goto19
-T-
Goto20
-T-
Goto21
-T-
Goto22
-T-
Goto23
-T-
Goto24
-T-
Goto25
-T-
Goto26
-T-
Goto27
-T-
Goto28
-T-
Goto29
-T-
Goto30
-T-
Goto31
-T-
Goto32
-T-
Goto33
-T-
Goto34
-T-
Goto35
-T-
Goto36
-T-
Goto37
-T-
Goto38
-T-
Goto39
-T-
Goto40
-T-
Goto41
-T-
Goto42
-T-
Goto43
-T-
Goto44
-T-
Goto45
-T-
Goto46
-T-
Goto47
-T-
Goto48
-T-
Goto49
-T-
Goto50
-T-
Goto51
-T-
Goto52
-T-
Goto53
-T-
Goto54
3.13.1. Blocks
3.13.1.1. Parameters
82
Subsystems
3.13.1.1.1. "Demux" (Demux)
Table 3.90. "Demux" Parameters
Parameter Value
Number of outputs [1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1]
Display option bar
Bus selection mode off
3.13.1.1.2. "Goto1" (Goto)
Table 3.91. "Goto1" Parameters
Parameter Value
Tag T61_5354_5969658242907
Icon display Tag
Tag visibility global
3.13.1.1.3. "Goto10" (Goto)
Table 3.92. "Goto10" Parameters
Parameter Value
Tag T49_4298_3884520452491
Icon display Tag
Tag visibility global
3.13.1.1.4. "Goto11" (Goto)
Table 3.93. "Goto11" Parameters
Parameter Value
Tag T49_4299_3885922608954
Icon display Tag
Tag visibility global
3.13.1.1.5. "Goto12" (Goto)
Table 3.94. "Goto12" Parameters
Parameter Value
Tag T49_4300_3887439418478
83
Subsystems
Parameter Value
Icon display Tag
Tag visibility global
3.13.1.1.6. "Goto13" (Goto)
Table 3.95. "Goto13" Parameters
Parameter Value
Tag T49_4299_3883093071539
Icon display Tag
Tag visibility global
3.13.1.1.7. "Goto14" (Goto)
Table 3.96. "Goto14" Parameters
Parameter Value
Tag T49_4300_3884493425281
Icon display Tag
Tag visibility global
3.13.1.1.8. "Goto15" (Goto)
Table 3.97. "Goto15" Parameters
Parameter Value
Tag T49_4301_3886008432083
Icon display Tag
Tag visibility global
3.13.1.1.9. "Goto16" (Goto)
Table 3.98. "Goto16" Parameters
Parameter Value
Tag T49_4300_3881730996709
Icon display Tag
Tag visibility global
84
Subsystems
3.13.1.1.10. "Goto17" (Goto)
Table 3.99. "Goto17" Parameters
Parameter Value
Tag T49_4301_3883129547730
Icon display Tag
Tag visibility global
3.13.1.1.11. "Goto18" (Goto)
Table 3.100. "Goto18" Parameters
Parameter Value
Tag T49_4302_3884642751811
Icon display Tag
Tag visibility global
3.13.1.1.12. "Goto19" (Goto)
Table 3.101. "Goto19" Parameters
Parameter Value
Tag T49_4301_3880434228002
Icon display Tag
Tag visibility global
3.13.1.1.13. "Goto2" (Goto)
Table 3.102. "Goto2" Parameters
Parameter Value
Tag T61_5355_5971906047486
Icon display Tag
Tag visibility global
3.13.1.1.14. "Goto20" (Goto)
Table 3.103. "Goto20" Parameters
Parameter Value
Tag T49_4302_3881830976301
85
Subsystems
Parameter Value
Icon display Tag
Tag visibility global
3.13.1.1.15. "Goto21" (Goto)
Table 3.104. "Goto21" Parameters
Parameter Value
Tag T49_4303_3883342377662
Icon display Tag
Tag visibility global
3.13.1.1.16. "Goto22" (Goto)
Table 3.105. "Goto22" Parameters
Parameter Value
Tag T49_4302_3879202765417
Icon display Tag
Tag visibility global
3.13.1.1.17. "Goto23" (Goto)
Table 3.106. "Goto23" Parameters
Parameter Value
Tag T49_4303_3880597710995
Icon display Tag
Tag visibility global
3.13.1.1.18. "Goto24" (Goto)
Table 3.107. "Goto24" Parameters
Parameter Value
Tag T49_4304_3882107309634
Icon display Tag
Tag visibility global
86
Subsystems
3.13.1.1.19. "Goto25" (Goto)
Table 3.108. "Goto25" Parameters
Parameter Value
Tag T49_4303_3878036608954
Icon display Tag
Tag visibility global
3.13.1.1.20. "Goto26" (Goto)
Table 3.109. "Goto26" Parameters
Parameter Value
Tag T49_4304_3879429751811
Icon display Tag
Tag visibility global
3.13.1.1.21. "Goto27" (Goto)
Table 3.110. "Goto27" Parameters
Parameter Value
Tag T49_4305_3880937547730
Icon display Tag
Tag visibility global
3.13.1.1.22. "Goto28" (Goto)
Table 3.111. "Goto28" Parameters
Parameter Value
Tag T61_5342_5924494204874
Icon display Tag
Tag visibility global
3.13.1.1.23. "Goto29" (Goto)
Table 3.112. "Goto29" Parameters
Parameter Value
Tag T61_5343_5926771698634
87
Subsystems
Parameter Value
Icon display Tag
Tag visibility global
3.13.1.1.24. "Goto3" (Goto)
Table 3.113. "Goto3" Parameters
Parameter Value
Tag T61_5356_5974308145836
Icon display Tag
Tag visibility global
3.13.1.1.25. "Goto30" (Goto)
Table 3.114. "Goto30" Parameters
Parameter Value
Tag T61_5344_5929203486164
Icon display Tag
Tag visibility global
3.13.1.1.26. "Goto31" (Goto)
Table 3.115. "Goto31" Parameters
Parameter Value
Tag T61_5343_5923113462426
Icon display Tag
Tag visibility global
3.13.1.1.27. "Goto32" (Goto)
Table 3.116. "Goto32" Parameters
Parameter Value
Tag T61_5344_5925388871945
Icon display Tag
Tag visibility global
88
Subsystems
3.13.1.1.28. "Goto33" (Goto)
Table 3.117. "Goto33" Parameters
Parameter Value
Tag T61_5345_5927818575235
Icon display Tag
Tag visibility global
3.13.1.1.29. "Goto34" (Goto)
Table 3.118. "Goto34" Parameters
Parameter Value
Tag T49_4247_4022363709609
Icon display Tag
Tag visibility global
3.13.1.1.30. "Goto35" (Goto)
Table 3.119. "Goto35" Parameters
Parameter Value
Tag T49_4248_4023802028656
Icon display Tag
Tag visibility global
3.13.1.1.31. "Goto36" (Goto)
Table 3.120. "Goto36" Parameters
Parameter Value
Tag T49_4249_4025355000765
Icon display Tag
Tag visibility global
3.13.1.1.32. "Goto37" (Goto)
Table 3.121. "Goto37" Parameters
Parameter Value
Tag T49_4286_3855496326777
89
Subsystems
Parameter Value
Icon display Tag
Tag visibility global
3.13.1.1.33. "Goto38" (Goto)
Table 3.122. "Goto38" Parameters
Parameter Value
Tag T49_4287_3856925740383
Icon display Tag
Tag visibility global
3.13.1.1.34. "Goto39" (Goto)
Table 3.123. "Goto39" Parameters
Parameter Value
Tag T49_4288_3858469807049
Icon display Tag
Tag visibility global
3.13.1.1.35. "Goto4" (Goto)
Table 3.124. "Goto4" Parameters
Parameter Value
Tag T61_5355_5968253437508
Icon display Tag
Tag visibility global
3.13.1.1.36. "Goto40" (Goto)
Table 3.125. "Goto40" Parameters
Parameter Value
Tag T49_4287_3854089517253
Icon display Tag
Tag visibility global
90
Subsystems
3.13.1.1.37. "Goto41" (Goto)
Table 3.126. "Goto41" Parameters
Parameter Value
Tag T49_4288_3855517128138
Icon display Tag
Tag visibility global
3.13.1.1.38. "Goto42" (Goto)
Table 3.127. "Goto42" Parameters
Parameter Value
Tag T49_4289_3857059392083
Icon display Tag
Tag visibility global
3.13.1.1.39. "Goto43" (Goto)
Table 3.128. "Goto43" Parameters
Parameter Value
Tag T49_4288_3852748013852
Icon display Tag
Tag visibility global
3.13.1.1.40. "Goto44" (Goto)
Table 3.129. "Goto44" Parameters
Parameter Value
Tag T49_4289_3854173822015
Icon display Tag
Tag visibility global
3.13.1.1.41. "Goto45" (Goto)
Table 3.130. "Goto45" Parameters
Parameter Value
Tag T49_4290_3855714283240
91
Subsystems
Parameter Value
Icon display Tag
Tag visibility global
3.13.1.1.42. "Goto46" (Goto)
Table 3.131. "Goto46" Parameters
Parameter Value
Tag T49_4289_3851471816573
Icon display Tag
Tag visibility global
3.13.1.1.43. "Goto47" (Goto)
Table 3.132. "Goto47" Parameters
Parameter Value
Tag T49_4290_3852895822015
Icon display Tag
Tag visibility global
3.13.1.1.44. "Goto48" (Goto)
Table 3.133. "Goto48" Parameters
Parameter Value
Tag T49_4291_3854434480519
Icon display Tag
Tag visibility global
3.13.1.1.45. "Goto49" (Goto)
Table 3.134. "Goto49" Parameters
Parameter Value
Tag T49_4290_3850260925417
Icon display Tag
Tag visibility global
92
Subsystems
3.13.1.1.46. "Goto5" (Goto)
Table 3.135. "Goto5" Parameters
Parameter Value
Tag T61_5356_5970499157847
Icon display Tag
Tag visibility global
3.13.1.1.47. "Goto50" (Goto)
Table 3.136. "Goto50" Parameters
Parameter Value
Tag T49_4291_3851683128138
Icon display Tag
Tag visibility global
3.13.1.1.48. "Goto51" (Goto)
Table 3.137. "Goto51" Parameters
Parameter Value
Tag T49_4292_3853219983920
Icon display Tag
Tag visibility global
3.13.1.1.49. "Goto52" (Goto)
Table 3.138. "Goto52" Parameters
Parameter Value
Tag T49_4291_3849115340383
Icon display Tag
Tag visibility global
3.13.1.1.50. "Goto53" (Goto)
Table 3.139. "Goto53" Parameters
Parameter Value
Tag T49_4292_3850535740383
93
Subsystems
Parameter Value
Icon display Tag
Tag visibility global
3.13.1.1.51. "Goto54" (Goto)
Table 3.140. "Goto54" Parameters
Parameter Value
Tag T49_4293_3852070793444
Icon display Tag
Tag visibility global
3.13.1.1.52. "Goto6" (Goto)
Table 3.141. "Goto6" Parameters
Parameter Value
Tag T61_5357_5972899171956
Icon display Tag
Tag visibility global
3.13.1.1.53. "Goto7" (Goto)
Table 3.142. "Goto7" Parameters
Parameter Value
Tag T49_4259_4051489458180
Icon display Tag
Tag visibility global
3.13.1.1.54. "Goto8" (Goto)
Table 3.143. "Goto8" Parameters
Parameter Value
Tag T49_4260_4052900520085
Icon display Tag
Tag visibility global
94
Subsystems
3.13.1.1.55. "Goto9" (Goto)
Table 3.144. "Goto9" Parameters
Parameter Value
Tag T49_4261_4054426235051
Icon display Tag
Tag visibility global
3.13.1.1.56. "v,i" (Inport)
Table 3.145. "v,i" Parameters
Parameter Value
Port number 1
Port dimensions (-1 -1
for inherited)
Sample time (-1 for -1
inherited)
Minimum []
Maximum []
Data type Inherit: auto
95
Chapter 4. Requirements Traceability
DTR_paper_LVDS does not contain requirements traceability links.
96
Chapter 5. System Model
Configuration
Source: Model
Source Name: DTR_paper_LVDS
97
System Model Configuration
ConsecutiveZCsStepRelTol 10*128*eps
MaxConsecutiveZCs 1000
ExtrapolationOrder 4
NumberNewtonIterations 1
MaxStep 1e-4
MinStep auto
MaxConsecutiveMinStep 1
RelTol 1e-3
SolverMode SingleTasking
EnableMultiTasking off
EnableConcurrentExecution off
ConcurrentTasks off
Solver VariableStepDiscrete
SolverName VariableStepDiscrete
SolverType Variable-step
SolverJacobianMethodControl auto
ShapePreserveControl DisableAll
ZeroCrossControl UseLocalSettings
ZeroCrossAlgorithm Nonadaptive
SolverResetMethod Fast
PositivePriorityOrder off
AutoInsertRateTranBlk off
SampleTimeConstraint Unconstrained
InsertRTBMode Whenever possible
SampleTimeProperty
98
System Model Configuration
SaveFinalState off
SaveCompleteFinalSimState off
SaveFormat Dataset
SaveOutput on
SaveState off
SignalLogging on
DSMLogging on
InspectSignalLogs off
SaveTime on
ReturnWorkspaceOutputs off
StateSaveName xout
TimeSaveName tout
OutputSaveName yout
SignalLoggingName logsout
DSMLoggingName dsmout
OutputOption RefineOutputTimes
OutputTimes []
ReturnWorkspaceOutputsName out
Refine 1
LoggingToFile off
DatasetSignalFormat timeseries
LoggingFileName out.mat
LoggingIntervals [-inf, inf]
99
System Model Configuration
OptimizeBlockIOStorage on
BufferReuse on
GlobalBufferReuse on
GlobalVariableUsage None
StrengthReduction off
AdvancedOptControl
EnforceIntegerDowncast on
ExpressionFolding on
BooleansAsBitfields off
BitfieldContainerType uint_T
EnableMemcpy on
MemcpyThreshold 64
PassReuseOutputArgsAs Structure reference
PassReuseOutputArgsThreshold 12
FoldNonRolledExpr on
LocalBlockOutputs on
RollThreshold 5
StateBitsets off
DataBitsets off
ActiveStateOutputEnumStorageType Native Integer
UseTempVars off
ZeroExternalMemoryAtStartup on
ZeroInternalMemoryAtStartup on
InitFltsAndDblsToZero off
NoFixptDivByZeroProtection off
EfficientFloat2IntCast off
EfficientMapNaN2IntZero on
LifeSpan auto
EvaledLifeSpan Inf
MaxStackSize Inherit from target
BufferReusableBoundary on
SimCompilerOptimization off
AccelVerboseBuild off
OptimizeBlockOrder off
OptimizeDataStoreBuffers on
BusAssignmentInplaceUpdate on
100
System Model Configuration
Name Diagnostics
Description
Components
RTPrefix error
ConsistencyChecking none
ArrayBoundsChecking none
SignalInfNanChecking none
SignalRangeChecking none
ReadBeforeWriteMsg UseLocalSettings
WriteAfterWriteMsg UseLocalSettings
WriteAfterReadMsg UseLocalSettings
AlgebraicLoopMsg warning
ArtificialAlgebraicLoopMsg warning
SaveWithDisabledLinksMsg warning
SaveWithParameterizedLinksMsg warning
CheckSSInitialOutputMsg on
UnderspecifiedInitializationDetection Simplified
MergeDetectMultiDrivingBlocksExec error
CheckExecutionContextRuntimeOutputM- off
sg
SignalResolutionControl UseLocalSettings
BlockPriorityViolationMsg warning
MinStepSizeMsg warning
TimeAdjustmentMsg none
MaxConsecutiveZCsMsg error
MaskedZcDiagnostic warning
IgnoredZcDiagnostic warning
SolverPrmCheckMsg none
InheritedTsInSrcMsg warning
MultiTaskDSMMsg error
MultiTaskCondExecSysMsg error
MultiTaskRateTransMsg error
SingleTaskRateTransMsg none
TasksWithSamePriorityMsg warning
SigSpecEnsureSampleTimeMsg warning
CheckMatrixSingularityMsg none
IntegerOverflowMsg warning
Int32ToFloatConvMsg warning
ParameterDowncastMsg error
101
System Model Configuration
ParameterOverflowMsg error
ParameterUnderflowMsg none
ParameterPrecisionLossMsg warning
ParameterTunabilityLossMsg warning
FixptConstUnderflowMsg none
FixptConstOverflowMsg none
FixptConstPrecisionLossMsg none
UnderSpecifiedDataTypeMsg none
UnnecessaryDatatypeConvMsg none
VectorMatrixConversionMsg none
InvalidFcnCallConnMsg error
FcnCallInpInsideContextMsg error
SignalLabelMismatchMsg none
UnconnectedInputMsg warning
UnconnectedOutputMsg warning
UnconnectedLineMsg warning
UseOnlyExistingSharedCode error
SFcnCompatibilityMsg none
FrameProcessingCompatibilityMsg error
UniqueDataStoreMsg none
BusObjectLabelMismatch warning
RootOutportRequireBusObject warning
AssertControl UseLocalSettings
Echo
EnableOverflowDetection off
AllowSymbolicDim on
ModelReferenceIOMsg none
ModelReferenceVersionMismatchMessage none
ModelReferenceIOMismatchMessage none
ModelReferenceCSMismatchMessage none
ModelReferenceSimTargetVerbose off
UnknownTsInhSupMsg warning
ModelReferenceDataLoggingMessage warning
ModelReferenceSymbolNameMessage warning
ModelReferenceExtraNoncontSigs error
StateNameClashWarn none
SimStateInterfaceChecksumMismatchMsg warning
SimStateOlderReleaseMsg error
InitInArrayFormatMsg warning
102
System Model Configuration
StrictBusMsg ErrorLevel1
BusNameAdapt WarnAndRepair
NonBusSignalsTreatedAsBus none
SFUnusedDataAndEventsDiag warning
SFUnexpectedBacktrackingDiag error
SFInvalidInputDataAccessInChartInitDiag warning
SFNoUnconditionalDefaultTransitionDiag error
SFTransitionOutsideNaturalParentDiag warning
SFUnconditionalTransitionShadowingDiag warning
SFUnreachableExecutionPathDiag warning
SFUndirectedBroadcastEventsDiag warning
SFTransitionActionBeforeConditionDiag warning
SFOutputUsedAsStateInMooreChartDiag error
SFTemporalDelaySmallerThanSampleTim- warning
eDiag
SFUnconditionalPathOutOfParentDiag warning
SFSelfTransitionDiag warning
SFExecutionAtInitializationDiag warning
SFMachineParentedDataDiag warning
SFUnreachableStateOrJunctionDiag warning
SFDanglingTransitionDiag warning
IntegerSaturationMsg warning
AllowedUnitSystems all
UnitsInconsistencyMsg warning
AllowAutomaticUnitConversions on
103
System Model Configuration
ProdBitPerSizeT 64
ProdBitPerPtrDiffT 64
ProdLargestAtomicInteger Char
ProdLargestAtomicFloat Float
ProdIntDivRoundTo Zero
ProdEndianess LittleEndian
ProdWordSize 64
ProdShiftRightIntArith on
ProdLongLongMode off
ProdHWDeviceType Intel->x86-64 (Windows64)
TargetBitPerChar 8
TargetBitPerShort 16
TargetBitPerInt 32
TargetBitPerLong 32
TargetBitPerLongLong 64
TargetBitPerFloat 32
TargetBitPerDouble 64
TargetBitPerPointer 32
TargetBitPerSizeT 32
TargetBitPerPtrDiffT 32
TargetLargestAtomicInteger Char
TargetLargestAtomicFloat None
TargetShiftRightIntArith on
TargetLongLongMode off
TargetIntDivRoundTo Undefined
TargetEndianess Unspecified
TargetWordSize 32
TargetTypeEmulationWarnSuppressLevel 0
TargetPreprocMaxBitsSint 32
TargetPreprocMaxBitsUint 32
TargetHWDeviceType Specified
TargetUnknown off
ProdEqTarget on
UseEmbeddedCoderFeatures on
UseSimulinkCoderFeatures on
104
System Model Configuration
Description
Components
UpdateModelReferenceTargets IfOutOfDateOrStructuralChange
SkipRefExpFcnMdlSchedulingOrderCheck off
EnableRefExpFcnMdlSchedulingChecks on
CheckModelReferenceTargetMessage error
EnableParallelModelReferenceBuilds off
ParallelModelReferenceErrorOnInvalidPo- on
ol
ParallelModelReferenceMATLABWorkerI- None
nit
ModelReferenceNumInstancesAllowed Multi
PropagateVarSize Infer from blocks in model
ModelDependencies
ModelReferencePassRootInputsByReferen- on
ce
ModelReferenceMinAlgLoopOccurrences off
PropagateSignalLabelsOutOfModel on
SupportModelReferenceSimTargetCustom- off
Code
105
System Model Configuration
SimExtrinsic on
SimIntegrity on
SimUseLocalCustomCode off
SimParseCustomCode on
SimBuildMode sf_incremental_build
SimDataInitializer
SimGenImportedTypeDefs off
CompileTimeRecursionLimit 50
EnableRuntimeRecursion on
MATLABDynamicMemAlloc on
MATLABDynamicMemAllocThreshold 65536
CustomSymbolStrEMXArray nothing
CustomSymbolStrEMXArrayFcn nothing
106
System Model Configuration
ProcessScript
ConfigurationScript
ConfigAtBuild off
RTWUseLocalCustomCode off
RTWUseSimCustomCode off
CustomSourceCode
CustomHeaderCode
CustomInclude
CustomSource
CustomLibrary
CustomDefine
CustomLAPACKCallback
CustomInitializer
CustomTerminator
Toolchain Automatically locate an installed toolchain
BuildConfiguration Faster Builds
CustomToolchainOptions
IncludeHyperlinkInReport off
LaunchReport off
RecursionLimit 50
PortableWordSizes off
GenerateErtSFunction off
CreateSILPILBlock None
CodeExecutionProfiling off
CodeExecutionProfileVariable executionProfile
CodeProfilingSaveOptions SummaryOnly
CodeProfilingInstrumentation off
CodeCoverageSettings DTR_paper_LVDS Configuration Set.Comp-
onents(8).CodeCoverageSettings [110]
SILDebugging off
TargetLang C
IncludeERTFirstTime off
GenerateTraceInfo off
GenerateTraceReport off
GenerateTraceReportSl off
GenerateTraceReportSf off
GenerateTraceReportEml off
GenerateCodeInfo off
GenerateWebview off
107
System Model Configuration
GenerateCodeMetricsReport off
GenerateCodeReplacementReport off
RTWCompilerOptimization off
ObjectivePriorities
RTWCustomCompilerOptimizations
CheckMdlBeforeBuild Off
CustomRebuildMode OnUpdate
DataInitializer
Components [DTR_paper_LVDS Configuration Set.Comp-
onents(8).Components(1) [110], DTR_pa-
per_LVDS Configuration Set.Components(-
8).Components(2) [112]]
108
System Model Configuration
CovShowResultsExplorer on
CovReportOnPause on
CovModelRefEnable off
CovModelRefExcluded
CovExternalEMLEnable on
CovSFcnEnable on
CovBoundaryAbsTol 1.0000e-05
CovBoundaryRelTol 0.0100
CovUseTimeInterval off
CovStartTime 0
CovStopTime 0
CovMetricStructuralLevel Decision
CovMetricLookupTable off
CovMetricSignalRange off
CovMetricSignalSize off
CovMetricObjectiveConstraint off
CovMetricSaturateOnIntegerOverflow off
CovMetricRelationalBoundary off
CovLogicBlockShortCircuit off
CovUnsupportedBlockWarning on
CovHighlightResults off
CovMcdcMode Masking
109
System Model Configuration
Name Simscape
EditingMode Full
ExplicitSolverDiagnosticOptions warning
GlobalZcOffDiagnosticOptions warning
SimscapeLogType none
SimscapeLogSimulationStatistics off
SimscapeLogOpenViewer off
SimscapeLogName simlog
SimscapeLogDecimation 1
SimscapeLogLimitData on
SimscapeLogDataHistory 5000
SelectedTab
Version 1.0
ComponentsAttached true
Listener [DTR_paper_LVDS Configuration Set.Comp-
onents(11).Listener(1) [115], DTR_paper-
_LVDS Configuration Set.Components(11).-
Listener(2) [115], DTR_paper_LVDS Conf-
iguration Set.Components(11).Listener(3) [-
115], DTR_paper_LVDS Configuration Se-
t.Components(11).Listener(4) [115], DT-
R_paper_LVDS Configuration Set.Compon-
ents(11).Listener(5) [115], DTR_paper_L-
VDS Configuration Set.Components(11).Li-
stener(6) [115], DTR_paper_LVDS Confi-
guration Set.Components(11).Listener(7) [-
115], DTR_paper_LVDS Configuration Se-
t.Components(11).Listener(8) [116], DTR-
_paper_LVDS Configuration Set.Compone-
nts(11).Listener(9) [116], DTR_paper_LV-
DS Configuration Set.Components(11).List-
ener(10) [116], DTR_paper_LVDS Config-
uration Set.Components(11).Listener(11) [-
116]]
someListenersNotInstalled false
instanceId
110
System Model Configuration
111
System Model Configuration
DefineNamingRule None
DefineNamingFcn
ParamNamingRule None
ParamNamingFcn
SignalNamingRule None
SignalNamingFcn
InsertBlockDesc off
InsertPolySpaceComments off
SimulinkBlockComments on
MATLABSourceComments off
EnableCustomComments off
InternalIdentifier Shortened
InlinedPrmAccess Literals
ReqsInCode off
UseSimReservedNames off
ReservedNameArray
112
System Model Configuration
GenerateSampleERTMain off
GenerateTestInterfaces off
ModelReferenceCompliant on
ParMdlRefBuildCompliant on
CompOptLevelCompliant on
ConcurrentExecutionCompliant on
IncludeMdlTerminateFcn on
CombineOutputUpdateFcns on
CombineSignalStateStructs off
SuppressErrorStatus off
ERTFirstTimeCompliant off
IncludeFileDelimiter Auto
ERTCustomFileBanners off
SupportAbsoluteTime on
LogVarNameModifier rt_
MatFileLogging on
MultiInstanceERTCode off
CodeInterfacePackaging Nonreusable function
SupportNonFinite on
SupportComplex on
PurelyIntegerCode off
SupportContinuousTime on
SupportNonInlinedSFcns on
RemoveDisableFunc off
RemoveResetFunc off
SupportVariableSizeSignals off
ParenthesesLevel Nominal
CastingMode Nominal
GenerateClassInterface off
ModelStepFunctionPrototypeControlComp- off
liant
CPPClassGenCompliant on
GRTInterface off
GenerateAllocFcn off
UseToolchainInfoCompliant on
GenerateSharedConstants on
ExtMode off
ExtModeStaticAlloc off
ExtModeTesting off
113
System Model Configuration
ExtModeStaticAllocSize 1000000
ExtModeTransport 0
ExtModeMexFile ext_comm
ExtModeMexArgs
ExtModeIntrfLevel Level1
RTWCAPISignals off
RTWCAPIParams off
RTWCAPIStates off
RTWCAPIRootIO off
GenerateASAP2 off
MultiInstanceErrorCode Error
114
System Model Configuration
CamUpVector [0 1 0]
CamHeight -1
CamViewAngle 0
VisBackgroundColor [0.9 0.9 0.95]
DefaultBodyColor [1 0 0]
MDLBodyVisualizationType Convex hull from body CS locations
OVRRIDBodyVisualizationType NONE
Name SimscapeMultibody1G
VisConfigFile
115
System Model Configuration
116
System Model Configuration
Table 5.20. HDL Coder
Property Value
HDLSubsystem DTR_paper_LVDS
Workflow Generic ASIC/FPGA
TargetPlatform
ReferenceDesign
ReferenceDesignPath
CoeffPrefix coeff
InputType std_logic_vector
OutputType Same as input type
ScalarizePorts off
CoeffMultipliers Multiplier
ResetType Asynchronous
FIRAdderStyle linear
MultiplierInputPipeline 0
MultiplierOutputPipeline 0
FoldingFactor 1
NumMultipliers -1
OptimizeForHDL off
TimingControllerPostfix _tc
OptimizeTimingController on
TimingControllerArch default
CastBeforeSum on
CheckHDL off
EnablePrefix enb
ClockEnableInputPort clk_enable
ClockEnableOutputPort ce_out
ClockInputPort clk
ClockEdge Rising
ResetInputPort reset
SimulatorFlags
HDLCompileFilePostfix _compile.do
HDLCompileInit vlib %s\n
HDLCompileTerm
HDLCompileVerilogCmd vlog %s %s\n
HDLCompileVHDLCmd vcom %s %s\n
EnableForGenerateLoops on
HDLMapFilePostfix _map.txt
HDLMapSeparator
117
System Model Configuration
118
System Model Configuration
TargetDirectory hdlsrc
TargetSubdirectory Model
EDAScriptGeneration on
HDLControlFiles
AddInputRegister on
AddOutputRegister on
AddPipelineRegisters off
PipelinePostfix _pipe
InputPort filter_in
OutputPort filter_out
FracDelayPort filter_fd
Name filter
RemoveResetFrom None
ResetAssertedLevel Active-high
ReuseAccum off
ScaleWarnBits 3
SerialPartition -1
DALUTPartition -1
DARadix 2
CoefficientSource Internal
CoefficientMemory Registers
InputComplex off
AddRatePort off
InputDataType
GenerateHDLCode on
GenerateModel on
GenerateTB off
GenerateCEGenModel off
Traceability off
ResourceReport off
OptimizationReport off
ErrorCheckReport on
HDLGenerateWebview off
IPCoreReport off
Recommendations off
RequirementComments on
Backannotation off
HierarchicalDistPipelining off
PreserveDesignDelays off
119
System Model Configuration
ClockRatePipelining on
CRPWithoutFlattening off
IncreaseCRPBudget off
AdaptivePipelining on
ClockRatePipelineOutputPorts off
CriticalPathEstimation off
optimizeserializer on
shareequalwl on
sharedmulsign Signed
MultiplierPromotionThreshold 0
RoutingFudgeFactor 0.5000
OptimizationCompatibilityCheck off
NumCriticalPathsEstimated 1
CriticalPathEstimationFile criticalPathEstimated
HardwarePipeliningCharacterizationFile
HighlightFeedbackLoops on
HighlightFeedbackLoopsFile highlightFeedbackLoop
HighlightClockRatePipeliningDiagnostic on
HighlightClockRatePipeliningFile highlightClockRatePipelining
DistributedPipeliningBarriers on
DistributedPipeliningBarriersFile highlightDistributedPipeliningBarriers
BlocksWithNoCharacterizationFile highlightCriticalPathEstimationOffending-
Blocks
AXIStreamingTransformFeatureControl off
SerializerRatioThreshold 8192
RetimingCP off
RetimingCPFile highlightRetimingCP
ClearHighlightingFile clearhighlighting
FunctionallyEquivalentRetiming on
DistributedPipeliningPriority NumericalIntegrity
RetimingDetails on
CriticalPathDetails off
SignalNamesMangling off
GuidedRetiming off
LatencyConstraint 0
ReduceMatchingDelays on
OptimizationData
CPGuidanceFile
CPAnnotationFile
120
System Model Configuration
HandleAtomicSubsystem on
OptimizeMdlGen on
MulticyclePathInfo off
MulticycleConstraints off
FloatingPointTargetConfiguration
GenerateTargetComps on
NativeFloatingPoint off
FPToleranceValue 1.0000e-07
FPToleranceStrategy DEFAULT
nfpLatency DEFAULT
nfpDenormals DEFAULT
AlteraBackwardIncompatibleSinCosPipeli- off
ne
FamilyDevicePackageSpeed
ToolName
SynthesisToolChipFamily
SynthesisToolDeviceName
SynthesisToolPackageName
SynthesisToolSpeedValue
SynthesisTool
SynthesisProjectAdditionalFiles
SimulationLibPath
XilinxSimulatorLibPath
AdderSharingMinimumBitwidth 0
MultiplierSharingMinimumBitwidth 0
MultiplyAddSharingMinimumBitwidth 0
ShareAdders off
ShareMultipliers on
ShareMultiplyAdds on
ShareMATLABBlocks on
ShareAtomicSubsystems on
ShareFloatingPointIPs on
PipelinedSharing on
OptimizeCRPSharingRegisters off
ClockRatePipeliningBudgetCheck off
EnableFPGAWorkflow off
FPGAWorkflowParameters
GainMultipliers Multiplier
ProductOfElementsStyle linear
121
System Model Configuration
UserComment
DateComment on
SafeZeroConcat on
SumOfElementsStyle linear
TargetLanguage VHDL
Oversampling 1
ClockRatePipeliningFraction 1
Verbosity 1
TestBenchName filter_tb
MultifileTestBench off
IgnoreDataChecking 0
TestBenchPostfix _tb
TestBenchDataPostfix _data
TestBenchStimulus
TestBenchUserStimulus
TestBenchFracDelayStimulus
TestBenchCoeffStimulus
TestBenchRateStimulus
ForceClockEnable on
MinimizeClockEnables off
MinimizeGlobalResets off
NoResetInitializationMode Script
NoResetInitScript noresetinitscript.tcl
ComplexMulElaboration MultiplyAddBlock
FlattenBus off
TestBenchClockEnableDelay 1
ForceClock on
ClockHighTime 5
ClockLowTime 5
HoldTime 2
InputDataInterval 0
ForceReset on
ErrorMargin 4
HoldInputDataBetweenSamples on
InitializeTestBenchInputs off
ResetLength 2
TestBenchReferencePostFix _ref
GenerateValidationModel off
RAMMappingThreshold 256
122
System Model Configuration
MapPipelineDelaysToRAM off
RemoveRedundantCounters on
ReplaceUnitDelayWithIntegerDelay on
ConcatenateDelays on
MergeDelaysOnFanouts on
FoldDelaysToConstant on
RAMArchitecture WithClockEnable
InlineMATLABBlockCode off
InlineHDLCode off
MaskParameterAsGeneric off
BalanceDelays on
TargetFrequency 0
ExtraEffortMargin 1
MaxOversampling Inf
MaxComputationLatency 1
MultiplierPartitioningThreshold Inf
TreatDelayBalancingFailureAs Error
TransformNonZeroInitValDelay on
DelayElaborationLimit 20
GenerateCoSimBlock off
HDLCodeCoverage off
GenerateHDLTestBench on
GenerateCoSimModel None
GenerateSVDPITestBench None
SimulationTool Mentor Graphics Modelsim
CoSimModelSetup CosimBlockAndDut
SynthesisOnDirective
SynthesisOffDirective
LoopUnrolling off
InlineConfigurations on
UseAggregatesForConst off
UseVerilogTimescale on
VerilogFileExtension .v
SystemVerilogFileExtension .sv
VHDLFileExtension .vhd
CodeGenerationOutput GenerateHDLCode
GeneratedModelName
GeneratedModelNamePrefix gm_
UseDotLayout off
123
System Model Configuration
ShowCodeGenPIR off
SerializeModel 0
SerializeIO 0
UseSLAutoRoute on
UseAutoPlace on
HighlightAncestors on
HighlightColor cyan
InitializeBlockRAM on
InitializeRealPort off
MapVectorPortToStream off
UseFileIOInTestBench on
TurnkeyWorkflow off
AlteraWorkflow off
GenerateFILBlock off
CoSimLibPostfix _cosim
TestBenchInitializeInputs off
MinimizeIntermediateSignals off
GenerateCodeInfo off
GatewayoutWithDTC off
IncrementalCodeGenForTopModel off
HDLWFSmartbuild on
HDLCodingStandard None
HDLCodingStandardCustomizations
ReferenceDesignParameter
HDLLintTool None
HDLLintInit
HDLLintTerm
HDLLintCmd
ModulePrefix
DetectBlackBoxNameCollision Warning
PIRTB on
PIRTC off
EmitNetlist off
UsePipelinedToolboxFunctions on
savepirtoscript off
ConcatenateHDLModules off
AMS off
124
Chapter 6. Glossary
Atomic Subsystem. A subsystem treated as a unit by an implementation of the design
documented in this report. The implementation computes the outputs of all the blocks
in the atomic subsystem before computing the next block in the parent system's block
execution order (sorted list).
Block Parameter. A variable that determines the output of a block along with its inputs,
for example, the gain parameter of a Gain block.
Block Execution Order. The order in which Simulink evaluates blocks during simula-
tion of a model. The block execution order determined by Simulink ensures that a block
executes only after all blocks on whose outputs it depends are executed.
Signal. A block output, so-called because block outputs typically vary with time.
Virtual Subsystem. A subsystem that is purely graphical, i.e., is intended to reduce the
visual complexity of the block diagram of which it is a subsystem. An implementation of
the design treats the blocks in the subsystem as part of the first nonvirtual ancestor of the
virtual subsystem (see Atomic Subsystem).
125
Chapter 7. About this Report
Table of Contents
7.1. Report Overview .................................................................................................. 126
7.2. Root System Description ....................................................................................... 126
7.3. Subsystem Descriptions ........................................................................................ 127
7.4. State Chart Descriptions ....................................................................................... 127
7.1. Report Overview
This report describes the design of the DTR_paper_LVDS system. The report was generated
automatically from a Simulink model used to validate the design. It contains the following
sections:
Model Version. Specifies information about the version of the model from which this
design description was generated. Includes the model checksum, a number that indicates
whether different versions of the model differ functionally or only cosmetically. Different
checksums for different versions indicate that the versions differ functionally.
Design Variables. Describes system design variables, i.e., MATLAB variables and exp-
ressions used as block parameter values.
System Model Configuration. Lists the configuration parameters, e.g., start and stop
time, of the model used to simulate the system described by this report.
Diagram. Simulink block diagram that represents the algorithm used to compute the
root system's outputs.
Description. Description of the root system. This section appears only if the model's
root system has a Documentation property or a Doc block.
Interface. Name, data type, width, and other properties of the root system's input and
output signals. The number of the block port that outputs the signal appears in angle
brackets appended to the signal name. This section appears only if the root system has
input or output ports.
126
About this Report
• Parameters. Describes key parameters of blocks in the root system. This section also
includes graphical and/or tabular representations of lookup table data used by lookup
table blocks, i.e., blocks that use lookup tables to compute their outputs.
• Block Execution Order. Order in which blocks must be executed at each time step
in order to ensure that each block's inputs are available when it executes.
State Charts. Describes state charts used in the root system. This section appears only
if the root system contains Stateflow blocks.
7.3. Subsystem Descriptions
This section describes a design's subsystems. Each subsystem description contains the
following sections:
Checksum. This section appears only if the subsystem is an atomic subsystem. The che-
cksum indicates whether the version of the model subsystem used to generate this report
differs functionally from other versions of the model subsystem. If two model checksums
differ, the corresponding versions of the model differ functionally.
Diagram. Simulink block diagram that graphically represents the algorithm used to
compute the subsystem's outputs.
Description. Description of the subsystem. This section appears only if the subsystem
has a Documentation property or contains a Doc block.
Interface. Name, data type, width, and other properties of the subsystem's input and
output signals. The number of the block port that outputs the signal appears in angle
brackets appended to the signal name. This section appears only if the subsystem is atomic
and has input or output ports.
Blocks. Blocks that this subsystem contains. This section has two subsections:
• Parameters. Key parameters of blocks in the subsystem. This section also includes
graphical and/or tabular representations of lookup table data used by lookup table bl-
ocks, blocks that use lookup tables to compute their outputs.
• Block Execution Order. Order in which the subsystem's blocks must be executed at
each time step in order to ensure that each block's inputs are available when the block
executes .This section appears only if the subsystem is atomic. Note: in Acrobat(PDF)
reports, the number in square brackets next to the block name is a hyperlink to the
block parameter table. The number has no model significance.
State Charts. Describes state charts used in the subsystem. This section appears only
if the root system contains Stateflow blocks.
States. Describes the state machine's states. Each state description includes the state's
diagram and diagrams and/or descriptions of graphical functions, Simulink functions, tr-
uth tables, and MATLAB functions parented by the state.
127
About this Report
Transitions. Transitions between the state machine's states. Each transition descripti-
on specifies the values of key transition properties. Appears only if a transition has pro-
perties that do not appear on the chart.
Junctions. Transition junctions. Each junction description specifies the values of key
junction properties. Appears only if a junction has properties that do not appear on the
chart.
Events. Events that trigger state transitions. Each event description specifies the values
of key event properties.
Data. Data types and other properties of the Stateflow block's inputs, outputs, and other
state machine data.
Targets. Executable implementations of the state machine used to compute the outputs
of the corresponding Stateflow block.
128