Professional Documents
Culture Documents
W8380-2
www.Fisher.com
Product Bulletin
61.2:1061 1061 Actuator
August 2017 D100095X012
Specifications
Available Configuration Stroking Time
Actuator Sizes: J 30, J 40, J 60, J 68, J 80, Dependent on actuator size, rotation, and positioner
J 100, and J 130 if used. If stroking time is critical, consult your
Action: Double‐acting pneumatic piston rotary Emerson sales office or Local Business Partner
actuator for J throttling service when used with
positioner, or J on‐off service when used with Construction Materials
switching devices Cylinder and Cylinder Flange: Aluminum
Housing Cover: J Cast iron or J aluminum (only for
Cylinder Operating Pressure size 130)
Minimum Recommended: J 1.4 bar (20 psig) Piston: J Aluminum or J Nylon‐coated piston
without positioner, or J 0.35 bar (5 psi) above (optional only for sizes 30 to 100)
actuator requirement with positioner(1).
Piston Rod: Chrome‐plated stainless steel
Maximum Allowable(2) Lever: Ductile iron
Sizes 30 and 60: 6.9 bar (100 psig) Sliding Seal: Aluminum
Size 40: 10.3 bar (150 psig) O‐Rings: Nitrile
Size 68: 5.9 bar (85 psig)
Size 80: 10.3 bar (150 psig) Housing:
Size 100: 10.3 bar (150 psig) Sizes 30, 40, 60, and 68: Cast iron
Size 130: 10.3 bar (150 psig) Sizes 80, 100 and 130: Aluminum
Mounting Yoke: Cast iron
Valve Shaft Diameters, mm (Inch)
Mounting Yoke Bushing: PTFE and steel
Size 30: J 12.7 (1/2), J 15.9 (5/8),J 19.1 (3/4),
J 22.2 (7/8), J 25.4 (1), and J 31.8 (1‐1/4) Material Temperature Capabilities with Standard
Sizes 40, 60, and 68: J 19.1 (3/4), J 22.2 (7/8), Elastomers(2)
J 25.4 (1), J 31.8 (1‐1/4), J 38.1 (1‐1/2), J 44.5
(1‐3/4), and J 50.8 (2) -34 to 82_C (-30 to 180_F)
Sizes 80 and 100: J 44.5 (1‐3/4), J 50.8 (2), and
J 63.5 (2‐1/2) Pressure Connections
Size 130: J 76.2 (3) and J 88.9 (3‐1/2) J 1/4 NPT internal (standard)
J 1/2 and 3/4 NPT internal (optional on sizes 68, 80,
Maximum Valve Shaft Rotation and 100)
J 90 degrees without travel stop or J 60 degrees J 3/4 NPT internal for Pipe-Away Vent option
with optional travel stop J 1 NPT internal for size 130
1. Actual actuator torque available depends on specific construction and casing pressure. For information on torque requirements of the valve being considered, contact your Emerson sales
office.
2. The pressure/temperature limits in this manual and any applicable standard or code limitation for actuator should not be exceeded.
2
Product Bulletin
1061 Actuator 61.2:1061
D100095X012 August 2017
W3827‐1 W2288‐3
Table 1. Displacement for 90 Degree Rotation Limit Switches: J TopWorx™ DXP M21GNEB limit
PISTON DOWN PISTON UP switch for one through six single‐pole, double‐throw
SIZE
cm3 Inch3 cm3 Inch3 contacts (see separate bulletin), J GO Switch™
30 1100 67 1200 74
proximity switches for one or two single‐pole,
40 2130 130 2230 136 double‐throw contacts, or J Micro‐Switches or
60 4060 248 4380 267 NAMCO switches for one or two single‐pole,
68 7210 440 7110 434 double‐throw or double‐pole, double‐throw contacts.
80 13,000 794 12,900 788 GO Switch proximity switch is not available for size 80,
100 19,100 1165 18,800 1150 100 or 130 actuators.
130 41,100 2508 40,200 2454
3
Product Bulletin
61.2:1061 1061 Actuator
August 2017 D100095X012
1 POSITION 1
STYLE D
LEFT‐HAND STYLE C POSITION 1 1
MOUNTING
2 4
FLOW
4 2
STYLE B 3 3
RIGHT‐HAND MOUNTING
STYLE A
STYLE D STYLE C
1 POSITION 1
POSITION 1 1
RIGHT‐HAND
MOUNTING
FLOW 2 4
STYLES
4 2
3 3
43A6506‐A
A1579‐5 LEFT‐HAND MOUNTING
Notes:
Position
1 1 is standard; positions 2 through 4 (shown in dotted lines) are alternates.
2. By Emerson definition:
D Forward flow is into the face side of the disk , or ball sealing surface.
D Reverse flow is into the hub side of the disk or ball.
4
Product Bulletin
1061 Actuator 61.2:1061
D100095X012 August 2017
5
Product Bulletin
61.2:1061 1061 Actuator
August 2017 D100095X012
Figure 4. Actuator Locking Mechanism for Size 30, 40, 60, and 68 Actuators
ACTUATOR
LEVER
MODIFIED
ACTUATOR
HOUSING
PADLOCK
(CUSTOMER
SUPPLIED)
LOCKING
MECHANISM
34B0458‐A
A6808
MOUNTING
PLATE
SAFETY
CAP SCREW (4) LOCKOUT
LOCKSCREW
PADLOCK LEVER
(CUSTOMER
SUPPLIED) MODIFIED
HOUSING
44B0457‐A
A6809
6
Product Bulletin
1061 Actuator 61.2:1061
D100095X012 August 2017
Table 4. Dimensions
P
ACTUATOR C E F H Y
w/o Positioner w/3610JP Pos.
SIZE
mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches
30 171 6.75 378 14.88 53.8 2.12 114 4.50 175 6.88 281 11.07 73.2 2.88
40 206 8.12 425 16.75 63.5 2.50 121 4.75 186 7.31 292 11.50 76.2 3.00
60 267 10.50 406 16.00 63.5 2.50 121 4.75 186 7.31 292 11.50 76.2 3.00
68 324 12.75 483 19.00 63.5 2.50 121 4.75 186 7.31 292 11.50 76.2 3.00
80 324 12.75 714 28.12 123 4.84 213 8.38 345 13.62 452 17.81 127 5.00
100 381 15.00 714 28.12 123 4.84 213 8.38 345 13.62 452 17.81 127 5.00
130 489 19.24 926 36.47 169 6.67 291 11.46 471 18.55 578 22.74 167 6.56
Table 5. Dimensions
STYLE F MOUNTING: V‐LINE, 8532, 8560, AND
STYLE G MOUNTING: 9500 SERIES VALVES
VALVE SHAFT DIAMETER ECCENTRIC DISK VALVES V
T U W T U W
mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches
12.7 1/2 117 4.62 - - - - - - 14.3 0.56 117 4.62 - - - - - - 11.1 0.44 137 5.38
15.9 5/8 117 4.62 - - - - - - 14.3 0.56 146 5.75 31.7 1.25 11.1 0.44 137(1) 5.38(1)
19.1 and 25.4 3/4 and 1 152 6.00 31.7 1.25 14.3 0.56 146 5.75 31.7 1.25 11.1 0.44 160 6.31
1‐1/4 and
31.8 and 38.1 235 9.25 45.9 1.81 17.5 0.69 210 8.25 50.8 2.00 17.5 0.69 148 5.81
1‐1/2
44.5 and 50.8 1‐3/4 and 2 273 10.75 50.8 2.00 20.5 0.81 241 9.50 69.8 2.75 17.5 0.69 286(2) 11.25(2)
63.5 2‐1/2 337 13.25 76.2 3.00 23.8 0.94 ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ 235 9.25
76.2 3(3) 533 21.00 127 5.00 33.5 1.32 ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ 322 12.68
88.9 3‐1/2(3) 533 21.00 127 5.00 33.5 1.32 ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ 322 12.68
1. Dimension shown is for eccentric disk, V150, V200, V300, CV500, 8532, and 8560 valves only; For 7600 and 9500 valves, dimension “V” is 160 mm (6.31 inches).
2. Dimension shown is for size 60 and 68 actuators only; for Size 80 and 100 actuators, the dimension “V” is 235 mm (9.25 inches).
3. Dimensions shown are for V260 valves only.
1/4 ‐18
NPT
U
E 1/4 ‐18
NPT T
T
1/4 ‐18
NPT W W
12.7 AND 15.9 mm 19.1 mm (3/4 INCH)
(1/2 AND 5/8 INCH) DIA. SHAFT AND LARGER DIA. SHAFTS
H
SIZE 30 ACTUATOR SIZE 40 AND LARGER ACTUATORS
7
Product Bulletin
61.2:1061 1061 Actuator
August 2017 D100095X012
Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
Fisher, Vee-Ball, FIELDVUE, TopWorx, GO Switch, and FlowScanner are marks owned by one of the companies in the Emerson Automation Solutions
business unit of Emerson Electric Co. Emerson Automation Solutions, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric
Co. All other marks are the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Automation Solutions
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Cernay, 68700 France
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
E
8 1987, 2017 Fisher Controls International LLC. All rights reserved.