Professional Documents
Culture Documents
9 Bibliografia Básica e Referências Bibliográficas
9 Bibliografia Básica e Referências Bibliográficas
Metalurgia Mecânica, George E. Dieter, Ed. Guanabara Dois, 2a. ed., 1.981.
Metals Handbook, vol.14, Forming and Forging, 9a. ed., ASM Int., 1.988.
Handbook of Metal Forming, Kurt Lange (Ed.), 1a. ed., McGraw-Hill Book Co., 1.985.
Metal Forming: Processes and Analysis, Betzalel Avitzur, Tata McGraw-Hill, 1.977.
Conformação Plástica dos Metais, Ettore Bresciani Filho, Ed. da UNICAMP, 4a. ed.,
1.991.
GEGEL, H.L., MALAS, J.C., DORAIVELU, S.M. e SHENDE, V.A., “Forging Process
Design”, Metals Handbook, vol. 14, Forming and Forging, ASM International, 1.988, pp.
409-416.
ALTAN, T., OH, S.I. e GEGEL, H.L., Metal Forming - Fundamentals and Applications,
cap. 12, ASM Soc. for Metals, 1.983, p. 173.
ALTAN, T., “Selection of Forging Equipment”, Metals Handbook, vol. 14, Forming and
Forging, ASM International, 1.988, p. 36.
BLICKWEDE, D.J., “Cold Extruding Steel”, Source Book on Cold Forming, Section I,
ASM, 1.977, pp. 1-6.
REED-HILL, R.E., Princípios de Metalurgia Física, Ed. Guanabara Dois, 2a. edição,
1.982.
46
McQUEEN, H.J. e JONAS, J.J., “Recovery and Recrystallization during High
Temperature Deformation”, Treatise on Materials Science - vol.6, Plastic Def. of
Materials, R.J. Arsenault, Academic Press, 1.975, pp. 393-493.
BARRET, C.S. e MASSALSKI, T.B., Structure of Metals, 3a. ed., Ed. McGraw-Hill,
1.966.
HONEYCOMBE, R.W.K., The Plastic Deformation of Metals, 2a. ed., Ed. Edward
Arnold, 1.984.
DIETER, G.E., “Evaluation of Workability”, Metals Handbook, vol. 14, 9a. ed., 1.988,
pp. 363-404.
47