Professional Documents
Culture Documents
Assignment 1 DUE 18 APRIL 2019
Assignment 1 DUE 18 APRIL 2019
Perform solid mechanics analysis of the signboard structure as shown in Figure 1. The signboard has a
dimension of 2.5 m x 1.5m and is made from Aluminium with a thickness of 3mm. The pole (diameter
150mm) is made from steel. Prepare the following:
If the new signboard is having twice the dimension of the existing one, verify if the current pole size
is safe to be used or not. If it doesn’t, what would be the new pole size that you propose? Use a
suitable safety factor in your calculation.
Use the rubric to guide u in preparing the report. The report shall not exceed 10 pages.
Figure 1