Professional Documents
Culture Documents
Beg Gasmotoren en Final PDF
Beg Gasmotoren en Final PDF
industrial CHP
Extremely efficient control of the engine speed is needed
to keep the stationary gas engine at its optimum opera-
tion point. The tried-and-tested speed control system
from the automotive industry is used here to ensure the
combustion engine runs at a stable speed.
Bosch EGC4
Eco-friendly thanks to optimum air/fuel control 50 kW … large engines
Existing and future emission limits are placing tough
demands on lambda control. This is where the latest
generation of Bosch lambda probes really comes into Bosch ME17.9.6
its own – the LSU 4.9 broadband sensor for highly 3 … 50 kW
micro CHP
System layout | Bosch components in stationary natural gas engines Bosch Engineering GmbH
Robert-Bosch-Allee 1
Gas control 74232 Abstatt
Intake air pressure and
Germany
temperature sensor Gas actuator and
position sensor
Contact: Christoph Lehmann
Ignition coil Phone: +49 (0)7062/911-6119
Phase sensor E-mail: Christoph.Lehmann@de.bosch.com
air / gas-
Spark plug Bosch Engineering North America
mixer
Temperature sensor 38000 Hills Tech Drive
(water) Farmington Hills, MI 48331-3417
Knock sensor United States
Speed sensor Phone: +1 248 876 6997
System
control unit
Bosch Engineering K. K.
CAN Queen’s Tower C 18F,
Diagnose Oxygen sensor Intake manifold pressure and 2-chome 3-5, Minatomirai,
temperature sensor Nishi-ku, Yokohama-shi
Throttle actuator and Kanagawa, 220-6218
throttle position sensor
Calibration Engine control unit Japan
software Bosch components Phone: +81 45-650-5610
www.bosch-engineering.com
Printed in Germany
292000P0RP-C/CCA-201404-En
© All rights reserved by Bosch Engineering GmbH, also for the event of registration of industrial property rights.
All rights of disposal, including copyright and right of distribution, reserved.