Sec no
ooee A rennpmentah
= Biotic Search a o PA
aor
» 45. XLPE Insulated Wire acenaRr
most
»Can be used for both high and low tensio
»Can be single or multiple cores. This helps
the flexibility of the wire.
Are are resistant to oxidation and UV light.
>In terms of physical capabilities, XLPE wi
resistant to environmental stress, stress ru
and cracking.
»Conductor material can be made of ei
Bt
Instrumentation Engineering Questions and answers Par-1
orrry 28 renee ia m= Oe
= Bintive Seareh a
ove
» 44, What is XLPE Cable ? What ie HART
Protos
»XLPE Cross-linked polyethylene is wid
as electrical insulation in power cable:
voltage ranges but it is especially well
to medium voltage applications.
insulated cables have a rated maxi
conductor temperature of 90 °C and
emergency rating up to 140 °C, dependi
the standard used
Bto PA
ove
orrry
= Bintive Seareh a
»43. What are FRLS Cables ?
»Flame Retardant Low Smoke (FRLS)
which are manufactured using sp
developed FRLS compound for sheathin:
resistant to ignition and flame propaga
and reduce smoke emission and rele
acid fumes.
Instrumentation Engineering Questions and answers Par-1
orrry 28 renee ia om Oe) @.
Biowive search a
aurora @
»Power Cables transfer both high energ Wt cA
energy equipment. Specifically designed
suit active and neutral environment,
cables bear a thick outer sheath compat
ordinary Control cables. The external shea
the Power cables with its immense strengt!
protection enables the cables to transfer
volume of energy without any tension or st
Power cables are equipped to transfer eners
Btorrry
o PA
Biowive search a
»Control cables send signals to cont
equipment.These cables allow distribul
data or signals that have low voltage.De
specifically for automation controls,these c
have a copper conductor, which is envelo
galvanized steel braid. Usually used for
ooee A rennpmentah om 88a
= Biowbe Seach a
Upnest or
p42. of Cables used in Instrumentat Wt ar
»Generally used According to their applicati
» Control Cable: Generally used for Control
like Switches, ON/Valves, solenoid valves,
signals. These Core cable like 2C, 3C, 7C etc.
Signal cable: Generally used for analogue si
like 4-20mA,RTD/Thermocouple signals. These
normally Screened Pair cables. |
Communication Cables: Used _ to
Una Tat
Instrumentation Engineering Question toaen