Professional Documents
Culture Documents
After maintenance of APMA you have to check and adjust compensation for water
steam:
PS
PS-1
F SV-2
FS P
SV-1
F-1
MC A-1
FS-1 OP-1 P-1
MC-1
CAT F BT
PS
PS-1
F SV-2
FS P
SV-1
F-1
MC A-1
FS-1 OP-1 P-1
MC-1
CAT F BT
BEFEUCHTER
5. If the measured value is stable, press AS key and the adjustment for water steam
will be done automatic
6. Exit Supervisor Modus and restore the original piping
7. Calibrate analyzer (zero and span)