BETHLEHEM
STRUCTURAL SHAPES
SIMPLIFIED LIST OF
STRUCTURAL STEEL SHAPES
EFFECTIVE FROM FEBRUARY 1, 1942
$-52a
This booklet should be inserted in Catalog S-51 entitled,
“Bethlehem Structural Shapes’’
BETHLEHEM STEEL COMPANY
rms
General Offices: [3#eAl] BETHLEHEM, PA.
——
Copyright 1942, Bethlehem Steel Company.BETHLEHEM STEEL COMPANY
This booklet lists Structural Sections that will be rolled
by Bethlehem Steel Company after February 1, 1942, in
accordance with the letter which follows issued by the:
OFFICE OF PRODUCTION MANAGEMENT,
SociaL SEcuRITY BUILDING
Wasuincton, D. C.
October 22, 1941
Bethlehem Steel Company
Bethlehem, Pennsylvania
Attention: Mr. Otto Gminder, Manager of Sales,
Structural Division
Subject: SIMPLIFICATION OF STRUCTURAL STEEL SHAPES
Gentlemen:
In the interest of maximim steel mill production and the conservation of the
available steel supply, as well as looking forward toward the most effective output during
the emergency period, it seems advisable and necessary to eliminate the non-essential
and unnecessary structural shapes now offered by the various steel-producing units
for use in various types of construction projects.
Effective from February 1, 1942, you are, therefore, requested to roll only the
attached simplified list of sections, as indicated on the three sheets headed ‘‘Simpli-
fication of Structural Steel Shapes.” This. provides a transitional period in which
Producers may move into consumption those shapes which have been eliminated by
this simplification program.
It will, therefore, be the responsibility of each producer of structural shapes to
notify their trade that on the above mentioned date only the simplified list of sections
will be available to them. It is suggested that in so notifying your trade you include
not only your list of normal customers of structural shapes, but also architects, engi-
neers, and so far as possible, individuals in any way involved with structural designs.
~ In sending out this notification it may be in the most convenient form, but perhaps
a leaflet or pamphlet of a convenient size for filing, draft use, etc., approximating the
existing structural manuals may be the proper form to adopt.
Very truly yours,
(Signed) A. D. WiiTEsipe
A. D, Whiteside, Chief,
Tron and Steel Section.BETHLEHEM STEEL COMPANY
IMPORTANT NOTICE
Simplification of Structural Steel Shapes
Effective for Production from February 1, 1942
This booklet shows the sections with their weights or thick-
nesses which will be the only sections available from rollings
after February 1, 1942,
Certain sections, as well as certain weights or thicknesses of
other sections as heretofore published in our Catalog S-51 and
not shown in this booklet, will no longer be available from rollings
after February 1, 1942.
It is suggested that you compare the information on sections
herein with your copy of our Catalog S-51 and make the necessary
changes in your copy of that catalog.
Prevailing mill conditions are such that we feel it is doubtful
if the sections no longer available after February 1, 1942 will
be available on new business from rollings before February 1,
1942,
It will, therefore, be a great convenience if orders placed
hereafter and if plans to be submitted for bids will include only
the sections available after February 1, 1942,
November 15, 1941 BETHLEHEM STEEL COMPANY