Professional Documents
Culture Documents
-33004/99
vlk/kj.k
EXTRAORDINARY
Hkkx II—[k.M 3—mi&[k.M (i)
PART II—Section 3—Sub-section (i)
izkf/dkj ls izdkf'kr
PUBLISHED BY AUTHORITY
la- 262] ubZ fnYyh] lkseokj] vizSy 22] 2019@oS'kk[k 2] 1941
No. 262] NEW DELHI, MONDAY, APRIL 22, 2019/VAISAKHA 2, 1941
अिधसूचना
सा.का.िन. 313(
313(अ).—कोयला खान िविनयम, 2017 के िविनयम 21 (1 ) के अ तगत िनधारत ावधान के अनुसार
िविनमय माण प (
- िनयम का काशन िननां कत अनुसार कया जाता है:
Exchange certificate) जारी करने के िलए उप- -
1.0 िविनमय हेतु िवचारत माण-प: धाि$वक खान िविनयम अथवा अिधिनयम के अ तगत इसके संशोिधत सं)क
, 1961 रण
अथवा कसी अ य देश म, लागू खान के िविनयम के िलए कसी भी कानून के तहत दी गई बंधक माण प सव23क माण प- , - ,
2.0 यावहारक
यावहारक अनुभव आ द: ) के उ9े:य के िलए कसी भी उमीदवार को उपरो;त ख<ड
िविनयम 21 (1 1.0 के अनुसार
कसी भी िविनमय माण प को जारी करने के िलए भारत के कोयला खान से >यावहारक अनुभव ा?त
- करना और नीचे
>यावहारक काय का
अनुभव 06 माह से कम का
नहD
2202 GI/2019 (1)
2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
का नहD
2. थम Bेणी बंधक माण थम Bेणी बंध
- खुली कोयला खान ख<ड
क भूिमगत / 3.0
कायG का >यावहारक
अनुभव 06 माह से कम का
नहD
2. खुली कोयला खान म,
>यावहारक काय का
अनुभव 06 माह से अिधक
का नहD
4. िFतीय Bेणी बंधक माण िFतीय Bेणी बंधक
- भूिमगत / खुली कोयला खान ख<ड 3.0
का नहD
2. खुली कोयला खान म,
>यावहारक काय का
अनुभव 03 महीने से
अिधक का नहD
9. फोरमेन माण प (के वल
- माण प
ओवरमैन / खुली कोयला खान
- भूिमगत ख<ड 5.0
का नामकरण, कृ ित कार इ$या द भारत म, जारी माण प कO तुलना म, वृPत तौर पर िभ न हR।
, -
** धाि$वक खान िविनयम के अ तगत जारी कया गया माण प को कोयला खान िविनयम
, 1961 - के अ तगत , 2017
असीिमत बंधक िविनमय माण प जारी करने हेतु उमीदवार के मामले म, खान म, कया गया दौरा का यू
- नतम
दूसरे खान म, एक से अ$यिधक बार दौरा कया जाता है तो इसकO गणना दो दौरे के Sप म, कO जाएगी।
बशत2 जब यह कसी कोयला खान या खान से जुड़े खनन संचालन के दौरान बचाव अनुसधं ान अथवा योजना म, काय के समय
,
असीिमत बंधक िविनमय माण प जारी करने हेतु उमीदवार के मामले म, दौर कO संZया
- कम से कम आधा भूिमगत
3.2 परी,ा:
3.2.1 िवषय: बंधक िविनमय माण प को जारी करने हेतु $ये
- उमी को िनन क$येक दो िवषय के िलए
दवार िलिखत
िनधारत िलिखत परी3ा और मौिखक परी3ा म, शािमल होना अिनवाय होगा।
(i) खनन िवधान
3.2.2 परी,क : बंधक िविनमय स3मता माण प कO परी3ा के िलए एक परी3क होगा। बंधक िविनमय स3मता
-
माण प परी3ा के िलए बोड Fारा िनयु;त परी3क खान िनरी3क अथवा थम Bेणी बंधक माण प धारक खनन
- -
अिभयंता होगा।
और मौिखक परी3ा के िलए अंक होगा। परी3ा उतीण करने के िलए उमीदवार को िलिखत और मौिखक परी3ा दोन म,
50
यू तम 50 अंक (अथात 50 अंक और 25 अंक eमश ) $येक िवषय म, लाना अिनवाय होगा तथा पूरे िवषय को िमलाकर
% :
3.4 पा8"म:
पा8"म परी3ा के िलए पाfeम
3.4.1 थम Bेणी बंधक िविनमय माण प परिश9ट - I - :
Fारा िनयु;त परी3क के Sप म, खान िनरी3क अथवा थम Bेणी माण प धारक खनन अिभयंता अथवा खनन सव23क
- -
4.2 अंक : परी3ा म, िलिखत परी3ा के िलए कु ल अिधकतम अंक और मौिखक परी3ा के िलए
100 100 अंक होगा।
परी3ा उ$तीण करने के िलए उमीदवार को िलिखत और मौिखक परी3ा दोन म, यू त अंक (अथात् $येक म,
म 50% 50
अंक) तथा िलिखत और मौिखक परी3ा म, कु ल योग का यू त अंक (अथात् 120 अंक) लाना अिनवाय होगा।
म 60%
अनुसार िलिखत और मौिखक परी3ा दोन म, सिमिलत होना आव:यक होगा और के वल खुली खान के िलए सीिमत सव23क
माण प के िलए परिश9ट - VI म, िनधारत पाfeमानुसार िलिखत और मौिखक परी3ा दोन म, सिमिलत होना
-
आव:य क होगा।
के अनुसार मौिखक परी3ा म, सिमिलत होना आव:य खुली खान के िलए सीिमत ओवरमैन
क होगा और केवल िविनमय
माण प के िलए परिश9ट - VIII म, िनधारत पाfeमानुसार मौिखक परी3ा म, सिमिलत होना आव:य
- क होगा।
मौिखक परी3ा म, सिमिलत होना आव:यक होगा और के वल खुली खान के िलए सीिमत सरदार िविनमय माण प के -
िलए परिश9ट - X म, िनधारत पाfeमानुसार मौिखक परी3ा म, सिमिलत होना आव:य क होगा।
5.3 ओवरमैन और सरदार िविनमय माण प परी3ा के िलए एक परी3क होगा। ओवरमैन और सरदार िविनमय माण
- -
प परी3ा के िलए परी3क के Sप म, बोड Fारा िनयु;त िनरी3क अथवा थम Bेणी बंधक माण प धारक खनन
खान -
अिभयंता होगा।
5.4 कुल अिधकतम 100 अंक का परी3ा होगा और परी3ा उ$तीण अंक अव:य
होने के िलए कम से कम 60 लाना होगा।
एवं अंितम ितिथ एवं औसत मािसक उ$पादन दया जाना चािहए।
अनुभव ऐसी कोयले कO खान म, ितमाह 1000 टन
होगा जो उ$पादन नहD
से कम कोयले का का)ट करे गा या केवल ओपन
व\क] ग तक सीिमत खान म, , 10000 घन मीटर ितमाह का उlखनन नही से कम ित होगा । माह 1000 टन से कम का
उlखनन करने वाली भूिमगत खान म, ित या उlखनन करने वाले ओपन का)ट व\क] ग
माह 10000 घन मीटर से कम तक
6.2 उमीदवार के अmछे )वा)nय एवं चर के मूल माण प और परी3ा के िलए िनधारत शु`क फOस जमा करवाने /
के साoय के अभाव म, कोई भी आवेदन )वीकार नहD कया जाएगा। अ य सभी माण प के )वमािणत फोटोकॉपी आवेदन
के समय )वीकाय कए जा सकते हR। उनके योaय >यावहारक अनुभव एवं उp के संबधं म, मूल माण प सभी परी3ाq म,
ता,
उ$तीण सफल होने के प:चा )तुत करने हगे। अmछे )वा)nय एवं चर के मूल माण प के अितर;त सारे मूल माण
/ त
7.2 मौिखक परी3ा म, $ये उमीदवार उसे सिचव Fारा जारी ािधकार प लाएगा और मांग करने पर उसे )तु
क त करे गा-
उपर मु ^त कया गया है एवं खान बंधक Fारा जहां वह िनयोिजत है या तकनीकO सं)थान के मुख Fारा जहr उ ह ने
अsययन कया था या एक राजपित अिधकारी Fारा स$यािपत हो तदथ क त)वीर आवेदक कO है।
(बी) आधार काड कO एक ित।
7.3 इले;tो इ$या द परी3ा क3 म, उमीदवार के पास म, नहD हगे
िनक गैजेट जैसे मोबाइल, लैपटॉप ।
अथवा परी3ा के दौरान गलत तरीके का उपयोग करता है उसको बोड Fारा मामले के तnय के आधार पर अयोaय
, घोिषत
कया जा सकता है और िनिuत अविध के िलए आगामी परी3ा के िलए वंिचत भी कया जा सकता है।
8.2 य द कोई उमी कसी भी माण प के िलए ली गई परी3ा म, सफल घोिषत कया जाता है अथवा िजसे
दवार जो
कोई माण प जारी कया गया है और उस माण प के िलए बाद म, ऐसा पाया जाता है क उसने झुठा िमnया माण
, /
प अथवा नकली माण प जमा कया है अथवा झुठी घोषणा )तु कO है तो बोड मामले के आधार पर उसके परणाम को
त ,
िनर)त कर सकता है अथवा उसको जारी उ;त माण प को भी वापस िलया जा सकता है।
9.0 परणाम. क0 घोषणा: बोड Fारा अनुमो दत परी3ाq का अंितम परणाम बोड Fारा िनधारत ितिथ पर सिचव
Fारा घोिषत कया जा एगा।
म, शािमल नहD होने दया जाएगा। उपयु;त 30 िमनट कO अविध म, परी3ा क3 म, भाग लेने वाले कोई भी उमीदवार कसी
भी अितर;त 3ितपूzत समय के हकदार नहD होगा।
10.2 परी3ा क3 म, वेश करने से पहले $ये उमीदवार सभी कताब, नो{स और पेपर आ द बाहर छोड़ देगा।
, क ,
जाएगा।
10.4 पेपर कO आपूzत कO जाएगी और आपूzत कए गए पेपर के अलावा अ य कोई पेपर इ)तेमाल नहD कया जाएगा।
10.5 उ$तर पुि)तका पर नाम नहD िलखा जाएगा। $ये उमी उ$तर पुि)तका से जुड़ी पच| पर अपना रोल
क दवार नंबर
िलखेगा / िलखेगी, अ य कसी जगह पर नहD। कोई भी उमीदवार जो अपनी उ$तर पुि)तका पर अपना रोल नंबर या नाम या
10.6 उमीदवार अपने )व प,िस रे खािच पेन ोtे;टर एवं रेखािच यं लाएंगे।
यं के पेन, ल, ,
10.7 गणना और अ य काय िजससे परणाम ा?त कया गया है संदभ के तहत :न के उ$तर के एकदम पास म, पृAठ के बाय,
,
10.10 कोई उमी दवार कसी अ य उमीदवार से बात कर रहा हो या कसी पुस्तक या नो{स से परामश कर रहा हो या
बोड Fारा दान कए गए पेपर को छोड़कर दूसरे पेपर का उपयोग कर रहा हो या कसी भी अ य अनुिचत तरीके से काय
करने पर िनरी3क / परी3क Fारा अयोaय घोिषत कया जाएगा।
10.11 कोई उमीदवार परी3ा शुS होने के बाद एक घंटे से पहले परी3ा क3 नहD छोड़ेगा।
10.12 जब उमी ने :न का उ$तर पूरा कर िलया हो या :न का उ$तर देने के िलए दी गई समय समा?त
दवार हो गयी हो
या उमी दवारको ख<ड के तहत अयोaय घोिषत कर दया गया हो तो वह उ$त पुि)तकाq को िनरी3क परी3क
10.10 , र- /
11.1 कोयला खान िविनयम, 2017 कO अिधसूचना भावी होने कO तारीख से कसी भी >यिi को िवशेष माण प के
िलए परी3ा देने कO सात यास से अिधक कO अनुमित नहD दी जाएगी। िलिखत परी3ा म, सिमिलत होना एक यास ‘‘ ’’
माना जाएगा।
11.3 कोई उमीदवार परी3ा म, आवेदन नहD करेगा या तब तक उपि)थत नहD होगा जब तक क उसके पास आव:य क
शैि3णक योaयता और >यावहारक अनुभव न हो अ यथा परपालन नहD होने कO अव)था म, बोड कसी भी )त
, र पर उनका
12.1 बोड कसी भी >यिi को अ य कार से उपयु;त पाए जाने पर भी िविनमय माण प जारी कर सकता है। -
12.2 इस अिधसूचना के पूव बोड Fारा कु छ भी कया गया अथवा कO गई कारवाई वैध और भावी रहेगा।
12.3 बशत2 क बोड ऐसे क जो उपरोi उप
सी भी मामले पर, म, िन@द नहD है िजसे उसके सम3
-कानून , लाया जाता है,
सं. डीजीएमएस/परी3ा/सीएमआर/उप
[फा. -िनयम/2018/1]
खान अिधिनयम, खान िनयमावली, कोयला खान िविनयम और कोयला खान के िलए अनुयोय क, ^ीय िवुत ािधकार
(सुर3ा और िवुत आपूzत से संबंिधत माप) िविनयम 2010
दुघटनाएँ वग|करण
– , कारण और िनवारण, दुघटना सांिZयकO और िव:ले दुघटना ितवेदन।
षण,
जोिखम बंधन: िसांत और योग िनरंतर और मु9े आधारत जोिखम मू`यांकन तकनीकO 3े म, इसके
, आधारभूत, , योग
के तरीके, जोिखम कO पहचान जोिखम मू`यांकन तकनीक काय)थल जोिखम आकलन और िनयंण (ड
`यूआरएसी) काय
, , ,
सुर3ा िवेषण (जेएसए) जोिखम मैt;स जोिखम बंधन िवक`प िनयंण का पदानुeम
, , , िनयंण भावशीलता , जोिखम ,
कं ?यूटर अनुयोग और िसमुलशे न जोिखम बंधन म, बंधक कO भूिमका (ूिडिलज,स) यथोिचत परीBम के सा
, , थ जोिखम
मू`यांकन एवं जोिखम बंधन का इ)ते tगर ए;शन र)पांस ?लान (टीएआरपी) का िसांत।
माल,
खनन पयावरण: ईआईए (पयावरण भाव आकलन) ईएमपी (पयावरण बंधन योजना)
, (वाह उपचार संयं) , ईटीपी ,
एसटीपी (सीवरे ज tीटम,ट ?लांट) भूिमगत और सतही खनन से पयावरण को खतरा
, दूषण कारक का
, िनपटने के उपाय,
उपचार, िनगरानी णाली जल बंधन खान बंदी कO योजना आर एंड आर (पुनवास और पुन: िनपटान)। भूिम अिध_हण म,
, ; ;
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 7
2013) और वन भूिम से संबिं धत कानून। तकनीकO और जैिवक उार और उपरी िमी बंधन।
ii िवLनंग और वMक& गं
भूगभशा कोयला सीम कO कृ ित और उ$पिl भारतीय कोयला 3े का िववरण खनन म, भू िवान का योग
: ; ; - ; भू-
वैािनक संरचनाएं फो`ड फॉ`ट ै ;चर फशर इ$या द बोरंग के तरीके िड)टब )tाटा म, बोरंग बोर होल सव23ण
; स, , , , , ; ;
इंडीके टेड और मािणत कोयला संचय (ूवड कोल रजव) वैािनक मानिच कO ाZया। ; भू-
कोयला सीम का खोलना: िनकास माग िवषयक कानूनी ावधान िनकासमाग कO ि)थित ऊsवाधर शाट इ ;ला शाट
, ; ; ; इन ,
इ ;ला ईन; शाट कO खुदाई और गहरीकरण 4ीट 4ाइवेज )टो 4ीLटंग Lसंकं ग के तरीके : सामा य
; ; मशीनीकृत न ; , रे तीले
बहा व और पानी भरे 3ेो म, यंीकृ त Lसंकं ग OजDग सीम,टेशन और अ य िवशेष तरीके शाट सपोट अ)थायी और
; , ; ,
)थायी ूLबंग आ द
, , , हाल के िवकास।
सतह और भूिमगत व)था सिहत खान के िवकास और Sपरेखा: शाट हॉलेज व)था कO Sपरेखा और -टॉप, िपट-बॉटम,
िवकास।
भूिमगत खनन के तरीके : कोयला सीम के खनन तरीक के िवक`प सीम कO मोटाई का चुनाव और कारक (गहराई, , झुकाव,
बोड और पीलर िविध: िवकास कO योजनाएं बोड और पीलर व\क] ग कO िडजाइन वैधािनक ावधान ; ; , िवकास के िलए
वैधािनक ावधान के Lवंग और )टोLवंग के साथ खंभे िनAकषण कO णाली का िडजाइन डीिपलरDग ऑपरेशन म,
; ;
मुZय िगरावट Sफ वेटंग के संकेत वायु िव)फोट और इससे बचाव हेतु सावधािनयां डीिपलरDग
; ; ; के दौरान आग और
लेआउट; लांगवॉल फेस का अिभिव यास (ओरयंटेशन) गेट रोड के िलए सप[ट णाली पावर सपोट tांसफर
; लांगवॉल ; ; फेस- ,
शीयरर और पलाऊ का संचालन; छत बंधन और हाड छत बंधन आविधक और मुZय िगरावट उ उ$पादक लांगवॉल ; ;
मोटी सीम का खनन: म`टी से;शन म, बोड और िपलर और लांगवॉल िविधयां म`टी )लाइस तरीके इन;लाई<ड )लाइLसंग
- ; - ; ;
आरोही और अवरोही eम म, हॉरज,टल )लाइLसंग और eॉस )लाइLसंग िवLनंग िविधयां के Lवंग इंटे_ल ; अंडर- ; सबलेवल ;
खनन के अ य िवशेष तरीके : वाइड )टॉल िविध पतली सीम के खनन के तरीके ; ; भूिमगत कोयला गैसीकरण, कोयला परत
उ$पादन ब,च का गठन रLपंग रपस के कार रपेिबिलटी और संचालन के चe कO अवधारणा ि4Lलंग
ला)ट ि4ल
; ; ; ; ; होल ;
दशन पैरामीटर ि4ल कO संZया कO आव:यकता
लाL)टंग िव)फोट िडजाइन िव)फोट िडजाइन को भािवत करने वाले
; ; , ;
कारक; डीप होल
लाL)टंग ित होल चाज कO गणना जमीन म, कं पन सेके<डरी िव)फोट और िव)फोट कO सम)याएं
; ; ; ; साइड
का L)टंग पयावरण अनुकूल गैर िव)फोटक तकनीक जैसे सफ2 स माइनर और उससे जुड़े सुर3ा पहलु।
; -
िमथेन का िनAकषण: सतह से इनसीम पर$य;त (एब ड,ड) खान िमथेन और कोयला म,
िमथेन िनकास, कोयला परत िमथेन,
उपि)थत गैस कO माा संसाधन और रजव अनुमान िमथेन कO खोज और िनAकषण म, यु;त ि4Lलंग के तरीके एवं बरती
; ;
जाने वाली सावधािनयां; गैस उ$पादन दर परयोजना अविध और अथव)था िमथेन के सं_ह और परवहन के तरीके
, ; ;
खनन णाली और )tाटा िनयंण के तरीक को िडजाइ मैकेिन;स कO अवधारणाq का उपयोग: भू न करने के िलए रॉक -
एि;स )tे थ
यल मॉूलस
, पोइसन अनुपात, यंग जे स इलाि)टिसटी िलथो)टैटक और हाइ4ो)टैटक दबाव चान
, कंवर , , ;
सपोट म, नवीनतम िवकास सपोट िडजाइन के आzथक पहलू सि
सड,स रॉक मास कO के Lवंग बप रॉक मास िनAपादन कO
, , ; ; ;
जांच; छत बंधन मेकेिन;स , े गम,ऑफ रॉक परफ़ोमस कO मोनेटरंग ब,च के कार और डंप ढलान कO
टेशन; रॉक मास ,
िवफलताएं, _ाउं ड मूवम,ट और )tाटा िनयंण के िसांत डंप कार आंतरक और पीट के बाहर का डंप डंप िनमाण
; , , , साईज,
आकार, साइट चयन और डंLपंग के िलए तैयारी डंLपंग के तरीके िनमाण के िलए आव:यक मशीन, समे कत और
, , डंप ,
असमे कत डंप, ढलान संतल ब,च बम ढलान के संतलु न को भािवत करने वाले कारक
ु न; ढलान कोण, , , , िडजाइन मानदंड और
िनगरानी णाली को भािवत करने वाले कारक डंप बंधन। ; डंप संतल
ु न;
िव)फोट: सुरि3त िव)फोटक का िवकास अनु?त )फोटक सुरि3त िव)फोटक कO संरचना और परी3ण
; िव ; , िमली-सेकंड
िडटोनेटस िव)फोटक के िवक`प कोयले और प$थर 4ाइवेज म, िव)फोटक का उपयोग और सुरि3त संचालन िव)फोटक
; , ,
खान िडजाइन म, संZया$मक मॉडLलंग खान िडजाइन और परचालन िनयंण म, कं ?यूटर का उपयोग।
का उपयोग,
परिश9ट – II
िNतीय ेणी बंधक िविनमय माण-प (असीिमत) परी,ा के िलए पा8"म
i खनन िवधान :
खान अिधिनयम, खान िनयमावली, कोयलाखान िविनयम और कोयला खान के िलए अनुयोय क, ^ीय िवुत ािधकार
(सुर3ा और िवुत आपूzत से संबंिधत माप) िविनयम 2010
दुघटनाएँ – उनके कारण और रोकथाम, दुघटना रपोट।
ii िवLनंग और वOकP ग
Sपरेखा और िवकास।
भूिमगत खनन के तरीके: कोयला सीम के खनन करने के तरीक का चुनाव एवं उ;त चुनाव को भािवत करने वाले कारक
(गहराई, सीम कO इ$या द
मोटाई, झुकाव ावधान। ) वैधािनक
बोड )तंभ
और बोड )तंभ काय कO Sपरेखा
िविध: और के ावधान ; वैधािनक कं टी यु , मशीनीकृत लोडर, िनरं तर खिनक ( यस
माइनस) आ द डीिपलरंग
, ा के Lवंग
और लागू वैधािनक )तंभ िनAकषण डीिपलरंग म,
वधान; और भराई के साथ ;
परशोधन।
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 9
लांगवाल खनन: एकल और एकािधक हे डDग गेट रोड को चलाने का तरीका; लांगवाल फेस एडवांLसंग और रीtीटंग फेस का
मॉिनटरंग।
मोटी सीम का खनन: म`टी से;शन म, बोड - म`टी )लाइस
और िपलर और लांगवॉल िविधयां; इ ;लाड )लाइLसंग तरीके; ;
के Lवंग
लाL)टंग
; शी`ड
गैलरी और अवरोही हाइ4ोिलक िविधयां; खनन; मोटी सीम खनन के िवशेष तरीके।
खनन के अ य )टाल
िवशेष तरीके: वाइड सीम तरीका; पतली के खनन के तरीके; भूिमगत कोयला गैसीकरण, कोयला परत
कO Sपरेखा उ$पादन ब,च िनमाण रLपंग रपर कार काय िनAपादन साइ कल
, पैरामीटर, का ; ; के ; रैप का ; हॉलरोड और का
संतल
ु न; भूिमगत उ$खनन सपोट
और खुले िपट के कO Sपरेखा Sफ बंधन और मजबूती फOल, , समािहत और असमािहत ,
डLपंग िनमाण
के तरीके, डंप आव:यक मशीन,के िलए ब,च बम
, ढलान संतल
ु न; ढलान का कोण, , , ढलान के संतल
ु न को
भािवत Sपरेखा
करने वाले कारक, िनगरानी णाली
का मापदंड और बंधन। ; डंप संतुलन; डंप
सावधािनयां।
पानी के िविभ ोत से खतरा; जल?लावन को रोकने हेतु सावधािनयां, िस`टेशन ब,च , और डंप िवफलताएं; जल िनकासी
व)था का िडजाइन, जल _हण 3े कO गणना, संप और पंप 3मता , पानी के बांध, रीट,Lनंग दीवार को बनाए रखना,
परिश9ट – III
थम ेणी बंधक िविनमय माण-प क0 परी,ा का पा8"म
(केवल खुली खान के िलए सीिमत)
i खनन िवधान :
खान अिधिनयम, खान िनयमावली, कोयलाखान िविनयम और खु ली कोयला खान के िलए अनुयोय क, ^ीय िवुत
ािधकार (सुर3ा और िवुत आपूzत से संबंिधत माप) िविनयम 2010
दुघटनाएँ वग|करण
– दुघटना सांिZयकO और िव:ले दुघटना ितवेदन।
, कारण और िनवारण, षण,
10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
जोिखम बंधन: िसांत और योग रंतर और मु9े आधारत जोिखम मू`यांकन तकनीकO 3े म, इसके योग
, आधारभूत, िन ,
के तरीके, जोिखम कO पहचान जोिखम मू`यांकन तकनीक काय)थल जोिखम आकलन और िनयंण (ड
`यूआरएसी) काय
, , ,
सुर3ा िवेषण (जेएसए) जोिखम मैt;स जोिखम बंधन िवक`प िनयंण का पदानुeम िनयंण भावशीलता
, , , , , जोिखम,
कं ?यूटर अनुयोग और िसमुलशे न जोिखम बंधन म, बंधक कO भूिमका (ूिडिलज,स) यथोिचत परीBम के सा
, , थ जोिखम
ii िवLनंग और वOकP
वOकP ग
भूगभशा कोयला सीम कO कृ ित और उ$पिl भारतीय कोलफO`स का िववरण खनन म, भूिवान का योग भूवै ािनक
: ; ; ;
संरचनाएं; फो`ड फॉ`ट ै ;चर फशर इ$या द बोरंग के तरीके िड)टब )tाटा म, बोरंग बोर होल सव23ण
स, , , , , ; ; इं डीकेटे ड
ओपनका)ट खनन: खान कO योजना कोयले कO सीम को खोलना और उ$खनन कO तैयारी बॉ;स कट कार
, ; , ; साइट का चयन;
ओपनका)ट खान का न;शा उ$पादन ब,च का गठन रLपंग रपस के कार रपेिबिलटी
, पैरामीटर, चe कO ; ; ; और संचालन के
अवधारणा; ि4Lलंग
ला)ट ि4ल दशन पैरामीटर ि4ल कO संZया कO आव:यकता
लाL)टंग िव)फोट िडजाइन
; होल ; ; ; , ;
िव)फोट िडजाइन को भािवत करने वाले कारक
लाL)टंग ित होल चाज कO गणना भूिम म, कं पन सेके<ड
; डीपहोल ; ; ; री
िव)फोट और उससे जुड़े सम)याएं और खतरे का)ट
लाL)टं पयावरण अनुकूल गैर िव)फोटक तकनीक सुर3ा के पहलु।
; ग; - ,
अिनरं तर / चeOय उ$खनन िविध एवं परवहन: शावेल डपर िवुत शावेल और हाइ4ोिलक शावेल का इ)ते ऑपरे शन; माल;
डाइ_ाम पVँच कO गणना साइकल टाइम चe उ$पादकता गणना आव:य बॉके ट 3मता )eै कार
; ; ; ; क ; पर; ; काम के तरीके;
पुश पुल ऑपरेशन इ$या द >हील ए;स , बॉकेटपरचालन िविधयां (लैटरल
लॉक
लॉक और पूण
लॉक आ द)
कवेटर - , हॉफ ,
क वे ऑपरेशन कO णाली आ द
यर; इ<डेप,डट, tक िड)पै िस)ट
; ओआईटीडीएस (ऑपरे टर िपट eLशंग च म); इन- , कोयला
कोल; संसाधन और रजव अनुमान िमथेन कO खोज और िनAकषण म, यु;त ि4Lलंग के तरीके एवं बरती जाने वाली
;
सावधािनयां; गैस उ$पादन दर परयोजना अविध और अथव)था िमथेन के सं_ह और परवहन के तरीके िनAकषण कु q
, ; ;
खनन और )tाटा िनयंण के तरीक को िडजाइन करने के िलए रॉक मैकेिन;स कO अवधारणाq का उपयोग: रॉक म, बनावट
कO Sप -रे खा और संतुलन; सपोट और मजबूती कO Sप
खुले पीट के ब,च के कार और डंप ढलान कO िवफलताएं -रे खा, ,
_ाउं ड मूवम,ट और )tाटा िनयंण के िसांत रॉक बो`ट के बल बो`ट ; परफ़ोमस कO मोनेटरंग , , तार जाल,रॉक मास ,
मेकेिन;स ऑफ रॉक े गम,टेशन कO eया डंप कार आंतरक और पीट के बाहर का डंप डंप िनमाण
; , 3े , , साईज, आकार,
कO िनगरानी साइट चयन) और डंLपंग के िलए तैयारी डंLपंग के तरीके डंप िनमाण के िलए आव:यक मशीन, समे कत और
( , , ,
और िनगरा नी णाली को भािवत करने वाले कारक डंप बंधन। ; डंप संतल
ु न;
िव)फोटक का उपयोग और सुरि3त संचालन िव)फोटक तकनीक, और उनकO सापे3 द3ता ; , कुल लागत अवधारणा और
सुर3ा सावधािनयां ।
पानी के िविभ ोत से खतरा जल?ला ; िस`टे ब,च और डंप िवफलताएं
वन को रोकने के िलए सावधािनयां; शन, ; जल
िनकासी व)था का िडजाइन जल_ह 3े कO गणना सप और पंप 3मता , ण रीटेLनंग दीवार िस`टे
, , पानी के बांध, , शन
खान िडजाइन म, संZया$मक मॉडLलंग का उपयोग खान िडजाइन और परचालन िनयंण म, कं ?यूटर का उपयोग। ,
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 11
परिश9ट – IV
िNतीय ेणी बंधक िविनमय माण-प क0 परी,ा का पा8"म
(केवल खुली खान के िलए सीिमत)
i खनन िवधान :
खान अिधिनयम, खान िनयमावली, कोयला खान िविनयम और खुली कोयला खान के िलए अनुयोय क, ^ीय िवु त
ओपनका)ट कO
खनन: कोयले उ$खनन कO
सीम को खोलना और बॉ;स कार 3े ओपनका)ट
तैयारी; कट, ; का चुनाव; खान
कO Sपरेखा उ$पादन ब,च िनमाण रLपंग रपर कार काय िनAपादन साइ कल
, पैरामीटर, का ; ; के रैप ; का ; हॉलरोड और का
धूल- शमन के िलए सड़क म, पानी युi होने वाले तरीके यादा
िछड़कना, )ेLयंग के कार
, -पानी डालने के जोिखम, वाटर- ,
Sपरेखा भा को िवत करने वाले कारक; डीपहो`ड
लाL)टंग ितहोल चाज कO सकR डरी
लाL)टंग
; गणना; भूिम-कंपन; और
और संतल
ु न; खुले िपट के सपोट कO Sप ब,च के कार तथा डप )लोप कO असफलता
और मजबूती रे खा, , भूिम का िखसकना
को भािवत Sप
करनेवाले कारक, िनगरानी णाली
रे खा का मापदंड और बंधन। ; डंप संतल
ु न; डंप
सावधािनयां।
पानी के िविभ ोत से खतरा;जल ?लावन को रोकने हेतु सावधािनयां, िस`टेशन ब,च , और डंप िवफलताएं; जल िनकासी
व)था का िडजाइन, जल_ह 3े कO ण गणना, संप और पंप 3मता रीट,Lनंग दीवार
, पानी के बांध, को बनाए रखना,
परिश9ट - V
सव;,क िविनमय माणप के िलए परी,ा हेतु पा8"म : (असीिमत)
िनयंित सव;,ण: tाइएंaयूलेशन tायलेटेरेशन खान सव23ण म, टोटल )टेशन एवं जीपीएस का योग।
; ;
टेकोमेQी
टोटल Cटेशन : टोटल )टेशन Fारा सव23ण ुटय अनुयोग , , समा योजन और
ईडीएम:
ईडीएम: िसांत कार
माप के ; ; सुधार और उपकरण का चयन।
12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
नेशनल िTड:
िTड न;शा 3ेप लैबट
कैिसनी एवं साव tा सफर मक2 टर िनद2शां क
के पॉलीकोिनक भौिमक 3ेप , लंबवत का
िजयोडेसी:
ी: )फे रायड एवं एिल?सायड िजयोस,tक
िजयोड, डेि;ट एवं ए)tोनोिमकल कोzडनेट ओथ[मेटक एवं
, , िजयो क ,
डायनािमक ऊंचाईयां।
योग।
कोरलेशन: सतह एवं भूिमगत कोरलेशन का तरीका, गायरो लेजर संयोजन सिहत |
सार ुटय
एवं के समायोजन के िनयम;tएंगुलेशन फOगस का समायोजन।
समतल मVयम, खड़ी ढाल वाले एवं ऊVव& खनन काय& Cथलो का सव;,ण: ि4फट एवं रोडवे म, दशा एवं _ेिड िनयंण एंट का ;
सहायक टेली)कोप के साथ या उसके िबना खड़ी ढाल वाले खनन काय )थलो tेवस]ग। के अनुरेख
,ेफल एवं आयतन क0 गणना: गणना: िविभ िविधय उनकO सीमाएं अथ वक और िबL`डंग इ)टी
और मेशन, रे ल और हॉल रोड
कव लेग
का आउट, हॉल रोड / रैपस का _ेिडए ट ई ;ला रोडवे और शाट कO गहराई का मापन अजीमुथ अ3ांश और
इन ,
नYश. के कार, उनका िनमा&ण, देखभाल भाल, भंडारण और संर,ण ; खान के न;श एवं से;शन सव23क से संबि
ं धत िवधान; के
कत और दािय$व।
िजयोलोिजकल मैप पढ़ना।
परिश9ट - VI
सव;,क िविनमय माण प के िलए परी,ा हेतु पा8"म :
(केवल खुली खान के िलए सीिमत)
टेकोमेQी
टोटल Cटेशन : )टेशन Fारा सव23ण ुटय
टोटल , अनुयोग , समायोजन और
गायर नॉथ का िसांत एवं िनधारण खागोलीय िकोण , णाली परवतन एवं खगोलीय िविध Fारा
, समय का और
िजयोडे
िजयोडेसी:
ी: िजयोड, )फे रायड एवं एिल?सायड िजयोस,tक
, , िजयो डेि;टक एवं ए)tोनोिमकल कोzडनेट ओथ[मेटक एवं
,
डायनािमक ऊंचाईयां।
योग।
ुटय. और समायोजन के िसUांत: ुटय. के कारण और वग\करण; परशुता कO झुकाव (Inclines of Precision) भार –
सार ुटय
एवं tएंगुलेशन फOगस का
के समायोजन के िनयम; समायोजन।
समतल मVयम, खड़ी ढाल वाले एवं ऊVव& खनन काय& Cथलो का सव;,ण: ि4फट एवं रोडवे म, दशा एवं _ेिड िनयंण एंट का ;
,ेफल एवं आयतन क0 गणना: गणना: िविभ िविधय उनकO सीमाएं अथ वक और िबL`डंग इ)टी
और मेशन, रे ल और हॉल रोड
कवका ले ग आउट, हॉल रोड / रैपस का _ेिडए ट ई ;ला रोडवे और शाट कO गहराई का मापन अजीमुथ अ3ांश और
इन ,
नYश. के कार, उनका िनमा&ण, देखभाल, ारण और संर,ण ; खान के न;श एवं से;शन
भाल, भंडारण सव23क
से संबि
ं धत िवधान; के
कत और दािय$व।
िजयोलोिजकल मैप पढ़ना।
परिश9ट - VII
ओवरमैन िविनमय माण प के िलए परी,ा हेतु पा8"म : (असीिमत)
(ए) सामा%य सुर,ा और िवधान
कोयला खदान काय से संबिं धत कोयला खान िविनयम 2017 के ावधान के तहत कोयला खदान काय िव)फोटक और
, ,
ावधान एवं िनयम; िविनयम के तहत ावधान का वतन और अनुपालन िजसके िलए ओवरमैन िजमेदार है।
,
खान गैस: उ$पित गुण और भाव खान गैस का पता लगाना मेथनोमीटर और म`टी गैस िडटे;टर गैस eोमोटो_ाफ
, , , , , लौ
सुर3ा लRप।
खान म, खतरनाक घटनाएं और इससे िनपटना दुघटनाय, उनके कारण और रोकथाम दुघट ना रपोट दुघटना कO ज
, ; ; गह को
खनन कO ओपनका)ट िविध: मशीनीकृ त और मैनअु ल िविध गहरे छेद ि4Lलंग ; ि4Lलंग) और िव)फोटन शोवे`स (डीप होल ;
और डंपस 4ैगलाइन
; ; बकेट >हील ए;)कवेटर )ट माइन म, ब,च का बनाया जाना
; सरफेस माइनर; ओपनका ; हॉल रोड का
रखरखाव; डेवल?ड िपलर को ओपनका)ट िविध Fारा खनन करने के दौरान बरती जाने वाली सावधािनयां एवं अ य सुर3ा
सावधािनयाँ; भूिम सुधार के तरीके; डंप बंधन ; हाइवाल खनन
बोड एवं िपलर एवं ल~गवाल के तरीक का सामा य िसांत म`टी से;शन व\क] aस; िविभ ि)थितय के तहत िडपलरं ग
; - के
तरीक; मशीनीकृत िपलर ए;सtै;शन नीचे वाले 3े म, काम करते समय सावधािनयां Sफ कं वजस
; पानी के पास / , एवं
छत के िनयंण के त$व: छत के )तर कO रॉक मास रेटंग (आरएमआर) छत बोL`टंग कO पित सड़क मागG का सपोट
- ; ; ;
काय)थल का सपोट और उनके कार सेटंग परी3ण और िनकासी िस)टेमे टक सपोट S`स पैकं ग और )टोLवंग
, , ; ; ; सतह
संरचनाq कO सुर3ा । वैधािनक Sप से ितबंिधत 3े और सतह संरचनाq के नीचे काम करना ।
कोयले और प$थर म, िव)फोटक का सुरि3त बंधन और उपयोग एक साथ फायरंग ओपनका)ट खान म, आग वाले 3े म,
; ;
और बाड़ आ द ।
सतह के पानी से खतर के Bोत और भूिमगत जल?लावन पानी कO गड़बड़ी और जल?लावन को रोकने के िलए सावधानी।
;
ाकृ ितक और यांिक व,टलेशन फे स और शाट कO खुदाई म, व,टलेशन सहायक और बू)टर पंख, को बैठाना; खान म, हवा
; ;
मापना; हवा का नमूनाकरण (sampling); पयावरण कO ि)थित का िनधारण व,टलेशन के मानक। ;
िव )फोटजिनक गैस और कोयले कO धूल के िव)फोट के कारण और रोकथाम के ाथिमक ान िव)फोटजिनक गैस के ,
वलनशीलता कO सीमाएं ।
)वतःदहन कO रोकथाम पहचान और िनयंण अि¢ 3े को बंद करना
, ; )टॉLपं और उनकO परी3ा सतह कO आग के
; फायर ग ;
जलभराव वाले एवं पर$यi 3े के िनकट बरतने अ वेषणकारी काम के िलए बोरं मशीन,
वाले सावधािनयां, ग ; पानी के
एलएचडी, कं टी यूअसमाइनर, शटल कार, eशर क वेयर िव)फोट छेद ि4ल रपर )eै पर
, , 4ैगलाइन डपर , ; ; शोवेल; ; ; रोड
_ेडर ; डोजर; पिहया लोडर; बकेट >हील ए;)कवेटर )ेडर ; £ेक (सzवस और पा\क] ग £े
; सरफेस माइनर; क सिहत);
ढु लाई और परवहन ढु लाई के कार रोप हौलेज और लोकोमोटव से`फ एL;टंग इ कलाइन भूिमगत और ओपनका)ट
; ; ; ;
परिश9ट - VIII
ओवरमैन िविनमय माणप के िलए परी,ा
परी,ा हेतु पा8"म :
(के वल खुली खान. के िलए सीिमत)
(ए) सामा%य सुर,ा और िवधान
खुली कोयला खदान काय से संबंिधत कोयला खान िविनयम 2017 के ावधान िव)फोटक और शॉटफायरंग लोLडंग
, ; ; ,
परवहन और डंLपंग गैस और पानी और अ य खतर के िखलाफ सावधािनयां िनयम के तहत ावधान का
; आग, धूल, ,
खान म, खतरनाक घटनाएं और इससे िनपटने के उपाय दुघट नाय, दुघटना रपोट दुघटना कO
; , उनके कारण और रोकथाम; ;
हॉल रोड का रखरखाव; डेवल?ड िपलर को ओपनका)ट िविध Fारा खनन करने के दौरान बरती जाने वाली सावधािनयां ;
रक्
लम डंप कO ि)थरता
े ेशन के तरीके; डंप का िनमाण एवं डंप बंधन
(stability), माइLनंग ; हाईवाल (Highwall mining )
िव)फोटक का सुरि3त बंधन और उपयोग एक साथ फायरंग खुली खान म, आगवाले 3े म, िव)फोट सुर3ा
; ; ;
सावधािनयां ।
सतह के पानी से खतर के Bोत और भूिमगत जलभराव पानी कO गड़बड़ी और जल?लावन को रोकने के िलए सावधानी ।
;
परिश9ट - IX
सरदार के िविनमय माणप के िलए परी,ा हेतु पा8"म: (असीिमत )
1. खदान )थल तथा सड़क मागG कO छत तथा कनार कO जांच करने कO िविध।
2. टबरं ग के तरीके एवं संबल सपोट लगाने फबोL`टंग
/ , सपोट हटाने ल~गबाल फे स मशीन
, एंकरे ज जाँच, , /
3. बालू भराव काय से संबिं धत सुर3ा के मु9े Bोत एवं असंLपंिडत Lपंड के समीप काय कO िविध।
, जल-
4. सप कO जाँच।
5. िव)फोटन एवं खान म, बाद के योग एवं ढुलाई।
6. वायु-संचार एवं खान कO गैस के संबिं धत ारंिभक जानकारी।
-
10. खान अिधिनयम 1952 के िनयम एवं उपिनयम के तहत ावधान के तहत
, कोयला खान िविनयम,2017 के
खान म, सामा य कायरत >यिiय कO सुर3ा तथा सरदार एवं शॉटफायरर के कत कO जानकारी ।
परिश9ट – X
सरदार के िविनमय माण प के िलए परी,ा हेतु पा8"म :
(के वल खुली खान. के िलए सीिमत)
1. हाईवाल एवं काय)थल के साईड और हॉलरोड़ इ$या द को जाँच करने के तरीका।
2. ओवरबडन )पोयल डपस के जाँच के तरीके ।
,
4. िवकिसत )तंभ / िपलर के उपर खुले खदान, उ¥ चाई पर काय हRिडLलंग भारी व)तुओ के हRडLलंग
, मैनअ
ु ल / , भारी
* Exchange certificate in lieu of Foreign certificates shall be granted by the Board as case specific, since the
nomenclature, nature, type, etc. of the foreign certificates differ vastly with that of certificates granted in India.
** Certificates granted under the Metalliferous Mines Regulations, 1961 shall be deemed as the corresponding
certificates granted under Coal Mines Regulations 2017.
3.0 MANAGER'S EXCHANGE CERTIFICATE:
3.1 Practical Experience:
Provided that in the case of experience gained while engaged in inspection connected with mining operations in any coal
mine or mines:
the practical experience required shall not be less than one hundred twenty inspections and
in the case of candidates for the grant of Unrestricted Manager's Exchange Certificate not less than half the
number of visits shall be made in the mines having workings belowground.
Note: - The required experience shall be calculated at an average rate of ten visits to coal mines per month. If on any one
day, more than one visit is made to different mines it shall be counted as two visits.
Provided further that in the case of experience gained while engaged in rescue, research or planning connected with
mining operations in any coal mine or mines:
the practical experience required shall not be less than Six months period of actual experience in the operations
aforesaid and
in the case of candidates for the grant of Unrestricted Manager's Exchange Certificate at least half the number of
visits shall be to mines having workings belowground.
3.2 Examination:
3.2.1 Subjects: Every candidate for the grant of a Manager's Exchange Certificate shall be required to appear in an
examination consisting of a written paper and an oral test in each of the following two subjects:
i. Mining Legislation
ii. Winning and Working
Provided that a candidate holding a Degree in Mining Engineering or other equivalent qualification approved in that
behalf by the Central Government shall be required to appear in written paper and oral test only in the subject of ‘Mining
Legislation’.
3.2.2 Examiner: There shall be one examiner for Manager’s Certificate of competency examination. The examiner for
Manager's Exchange Certificate examination appointed by the Board shall be an Inspector of Mines or a Mining
Engineer holding First Class Manager’s Certificate.
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 19
3.3 Marks: The examination shall carry a total maximum of 150 marks for each subject with a maximum of 100
marks for the written paper, and 50 marks for the oral test. In order to pass the examination, a candidate must obtain not
less than 50 % marks both in the written and oral test (i.e. 50 marks and 25 marks respectively) in each subject and an
aggregate of not less than 60% marks (i.e. 90 marks) in the written examination and oral test taken together in all the
subjects.
3.4 Syllabus: The syllabus for the examination for -
3.4.1 the First Class Manager's Exchange Certificate shall be as laid down in Annexure - I,
3.4.2 the Second Class Manager's Exchange Certificate shall be as laid down in Annexure - II,
3.4.3 the First Class Manager's Exchange Certificate Restricted to mines having opencast workings shall be as laid
down in Annexure - III and
3.4.4 the Second Class Manager's Exchange Certificate Restricted to mines having opencast workings shall be as laid
down in Annexure – IV.
4.0 SURVEYOR'S EXCHANGE CERTIFICATE:
4.1 Examiner: There shall be one examiner for Surveyor’s Certificate of competency examination. The examiner for
Surveyor's Exchange Certificate examination appointed by the Board shall be an Inspector of Mines or a Mining
Engineer holding First Class Manager’s Certificate or a person holding the Mine Surveyor’s Certificate.
4.2 Marks: The examination shall carry a total maximum of 100 marks for the written paper and 100 marks for the
oral test. In order to pass the examination, a candidate must obtain not less than 50 % marks both in the written and oral
test (i.e. 50 marks each) and an aggregate of not less than 60% marks (i.e. 120 marks) in the written examination and oral
test taken together.
4.3 Every candidate for the grant of a Surveyor's Exchange Certificate shall be required to appear in an examination
consisting of a written paper and an oral test on the syllabus laid down in Annexure – V and for the grant of a Surveyor's
Certificate restricted to mines having opencast workings only shall be required to appear in an examination consisting of
a written paper and an oral test on the syllabus laid down in Annexure – VI.
5.0 OVERMAN'S AND SIRDAR’S EXCHANGE CERTIFICATE:
5.1 Every candidate, for the grant of a Overman’s Exchange Certificate shall be required to appear in an oral
examination on the syllabus laid down in Annexure – VII and for the grant of a Overman’s Exchange Certificate
restricted to mines having opencast workings only shall be required to appear in an oral examination on the syllabus laid
down in Annexure – VIII.
5.2 Every candidate, for the grant of a Sirdar’s Exchange Certificate shall be required to appear in an oral
examination on the syllabus laid down in Annexure – IX and for the grant of a Sirdar’s Exchange Certificate restricted
to mines having opencast workings only shall be required to appear in an oral examination on the syllabus laid down in
Annexure – X.
5.3 There shall be one examiner for Overman's and Sirdar’s Certificate of competency examination. The examiner
for Overman's and Sirdar’s Exchange Certificate examination appointed by the Board shall be an Inspector of Mines or a
Mining Engineer holding First Class Manager’s Certificate.
5.4 The examinations shall carry a total maximum of 100 marks and in order to pass the examination a candidate
must obtain not less than 60 marks.
6.0 APPLICATIONS TO BE SUPPORTED BY ORIGINAL DOCUMENTS, ETC.:
6.1 Every certificate of experience should contain precise information about the capacity in which the candidate
worked, the nature of work done, the dates of commencement and termination of experience as also the average monthly
production.
The experience shall be in a below ground coal mine producing not less than 1000 tonnes of coal per month or
in a mine restricted to opencast workings only handling material not less than 10000 cubic metre per month. Experience
in belowground mines producing less than 1000 tonnes per month of coal or in a mine restricted to opencast workings
handling less than 10000 cubic metres per month of material may be approved to the extent determined by the Board.
6.2 No application shall be considered unless it is supported by original certificates as to the sound health and
character of the candidate and is accompanied by evidence that the prescribed fee has been paid. The self-attested copies
of all other certificates may be accepted at the time of the applications. The original certificates of qualifications,
practical experience, age shall be submitted by the candidate upon passing all the examination. All original certificates
other than character and that of sound health shall be returned to the candidate.
20 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
11.3 No candidate shall apply or appear in an examination unless he / she possesses the required academic
qualification and practical experience failing which the Board may cancel his / her result or certificate at any stage.
12.0 Notwithstanding anything contained in this notification:
12.1 the Board may also grant Exchange Certificate to any person otherwise found suitable:
12.2 anything done or any action taken by the Board prior to this notification shall remain valid and effective.
12.3 Provided that the Board may take decision on any matter, not specified under the above bye-laws, which may be
brought to it for disposal.
13.0 If there is any variation or doubt between English and Hindi versions of Bye-laws, then English version of Bye-
laws will prevail over the Hindi version.
[F. No. DGMS/EXAMS/CMR/BYE LAWS/2018/1]
UTPAL SAHA, Chairman, Board of Mining Examinations (Coal) &
Director General of Mines Safety
ANNEXURE – I
SYLLABUS FOR EXAMINATION FOR FIRST CLASS MANAGER'S EXCHANGE CERTIFICATE (UN-
RESTRICTED)
i. MINING LEGISLATION:
The Mines Act; the Mines Rules; the Coal Mines Regulations; the Central Electricity Authority (Measures relating to
Safety and Electric Supply) Regulations, 2010 applicable to Coal mines.
Accidents - Classification, causes and prevention. Accidents statistics and analysis. Accident reports.
Risk Management: Theory and application, baseline, continuous and issue based risk assessment, how they are applied
to technical areas, hazard identification, risk assessment techniques, Work Place Risk Assessment and Control (WRAC),
Job Safety Analysis (JSA), Risk Matrix, Risk Management Options, Hierarchy of controls, Control Effectiveness, means
of managing (minimizing or eliminating) risk, computer application and simulations, manager’s role in risk management,
due diligence, application of risk assessment and risk management with reference to due diligence, Concept of Triggered
Action Response Plan (TARP).
Mining Environment: EIA (Environment Impact Assessment), EMP (Environment Management Plan), ETP (Effluent
Treatment Plant), STP (Sewerage Treatment Plant), threat to environment from underground and surface mining, means
of mitigation, treatment of pollutants, monitoring systems, water management; mine closure plan; R&R (rehabilitation
and re-settlement). RFCTLARR Act, 2013 and laws related to forest land. Technical and biological reclamation and top
soil management.
ii. WINNING AND WORKING:
Geology: Nature and occurrence of coal seams; description of Indian coalfields; application of geology to mining;
geological structures; folds, faults, fractures, fissures etc., methods of boring, boring through disturbed strata; bore hole
survey; indicated and proved coal reserves; interpretation of geological maps.
Opening of coal seams: Legal requirement about outlets; location of outlets; vertical shaft; inclined shaft; inclines; shaft
sinking and deepening; drift drivage; mechanized stone drifting; methods of sinking: mechanized sinking in ordinary and
water logged grounds, in running sand etc.; freezing, cementation and other special methods; shaft supports, temporary
and permanent, tubings, etc., recent developments.
Developments and layout of mines including surface and underground arrangements: Layout and development of shaft-
top, pit-bottom, haulage arrangements, etc.
Underground Mining Methods: Choice of methods of mining coal seams and factors (depth, seam thickness,
inclination, etc.) affecting the same; statutory provisions.
Bord and Pillar method: Schemes of development; design of bord and pillar working; statutory provisions selection of
equipment for development – mechanized loaders, continuous miners etc., preparatory arrangement for depillaring;
statutory provision for depillaring; designing the system of pillar extraction with caving and stowing; mechanization in
depillaring operation; types of loading machines - SDL, LHD, Continuous Miners etc.; roof management; local fall and
main fall; indications of roof weighting; air blasts and precautions against the same; precautions against fire and
inundation during depillaring; multi-section and contiguous working; liquidation of developed pillars.
Longwall mining: Method of driving single and multiple heading gate roads; longwall face layout - advancing and
retreating faces; orientation of longwall face; support system for longwall gate roads; powered support; face transfer,
22 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
operation of shearer and plough; roof management and hard roof management; periodic and main fall; design of high
productive longwall panel; mini/short wall mining; communication and telemonitoring.
Thick seam mining: Board and pillar and longwall methods in multi-section; multi-slice methods; inclined slicing;
horizontal slicing and cross slicing in ascending and descending orders; under-winning methods; sublevel caving;
integral caving; blasting gallery and descending shield methods; hydraulic mining; special methods of thick seam mining.
Other special methods of mining: Wide stall method; methods of mining thin seams; underground coal gasification,
coal bed methane/ coal mine methane etc.
Opencast Mining: Mine Planning, Opening of coal seams and preparation for excavation; box cut, types; selection of
site; formation of production benches; ripping; types of rippers; concept of rippability and cycle of operation; drilling;
blast hole drills; performance parameters; requirement of number of drills; blasting; blast design; factors influencing blast
design; deep hold blasting; calculation of charge per hole; ground vibration; secondary blasting and problems of blasting;
side casting; environment friendly non-blasting techniques such as Surface Miners and their safety aspects.
Extraction of Methane: Surface to Inseam Methane Drainage, Coal Bed Methane, Abandoned Mine Methane and Gas
content of Coal; Resource and Reserve estimation; Methods of drilling and precautions required while exploration and
extraction of methane; Gas production rate, project life and economy; Methods of Collection and
conveying/transportation of methane; Installation of extraction wells; Hazards involved.
Application of concepts of Rock Mechanics for designing the methods of mining and strata control: Theories of
ground movement and strata control; stress, strain - compressive and tensile, shear strength uniaxial and tri-axial
strength, Poisson’s Ratio, Young’s Modulus, convergence, elasticity, lithostatic and hydrostatic pressure; rock mass
classification, strength of stooks; shaft pillar; protection of surface structures; design and stability of structures in rock;
rock mass rating, design of support and reinforcement for underground excavations and open pits, support resistance,
yielding and non-yielding supports, dynamic and static loading, measuring instruments, consolidated and unconsolidated
fills, rock bolts, cable bolts, wire mesh, latest developments in mine supports, economics of support design, subsidence;
caving of rock mass; bumps; monitoring of rock mass performance; roof management, mechanics of rock fragmentation;
monitoring of rock mass performance, Types of bench and dump slope failures, Theories of ground movement and strata
control, ; Dump types, internal and out of pit dumps, Dump construction, size, shape, Site selection and preparation for
dumping, Methods of dumping, machines required for dump construction, consolidated and unconsolidated dumps, slope
stability; slope angle, benches, berms, factors affecting slope stability, design criteria and monitoring systems; dump
stability; dump management.
Danger from different sources of water; precautions to prevent inundation, siltation, bench and dump failures;
designing drainage system, calculation of catchment area, sump and pump capacity, water dams, retaining walls,
siltation ponds, gabion walls, water danger plans
Blasting: Development of safe explosives; permitted explosives; composition and testing of safe explosives Milli-second
detonators; alternatives of explosives. Use and safe handling of explosives in coal and stone drivages, blasting techniques
and their relative efficiency, total cost concept.
Application of numerical modeling in mine design, application of computers in mine design and operational controls.
ANNEXURE - II
SYLLABUS FOR EXAMINATION FOR SECOND CLASS MANAGER'S EXCHANGE CERTIFICATE (UN-
RESTRICTED)
i. MINING LEGISLATION:
The Mines Act; the Mines Rules; the Coal Mines Regulations and the Central Electricity Authority (Measures relating to
Safety and Electric Supply) Regulations, 2010 applicable to Coal mines.
Accidents - Their cause and prevention. Accident reports.
ii. WINNING AND WORKING
Geology: Nature and occurrence of coal seams; description of Indian coalfields; geological features of coalfields;
methods of boring, boring through disturbed strata; bore hole survey; interpretation of geological maps.
Opening of coal seams: shaft sinking and drift drivage; methods of sinking: mechanized sinking, in ordinary and water
logged grounds and other special methods; shaft supports, temporary and permanent, mechanised stone drifting etc.
Developments and layout of mines including surface and underground arrangements: Layout and development of
shaft-top and pit-bottom and haulage arrangements.
Underground Mining Methods: Choice of methods of mining coal seams and factors (depth, seam thickness,
inclination, etc.) affecting the same; statutory provisions.
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 23
Board and Pillar method: Design of bord and pillar working; statutory provisions, mechanized loaders, continuous
miners etc., depillaring and applicable statutory provision; pillar extraction with caving and stowing; mechanization in
depillaring; local fall and main fall; indications of roof weighting; air blasts and precautions against the same;
precautions against fire and inundation during depillaring; multi-section and contiguous working; liquidation of
developed pillars.
Longwall mining: Method of driving single and multiple heading gate roads; orientation of longwall face - advancing
and retreating faces; orientation of longwall face; support system for longwall gate roads; powered support; face transfer,
operation of shearer and plough; periodic and main fall; mini / short wall mining; communication and telemonitoring.
Thick seam mining: Board and pillar and longwall methods in multi-section; multi-slice methods; inclined slicing;
horizontal slicing and cross slicing in ascending and descending orders; under-winning methods; sublevel caving;
integral caving; blasting gallery and descending shield methods; hydraulic mining; special methods of thick seam mining.
Other special methods of mining: Wide stall method; methods of mining thin seams; underground coal gasification,
coal bed methane / coal mine methane etc.
Opencast Mining: Opening of coal seams and preparation for excavation; box cut, types; selection of site; Layout of
Opencast mine, parameters, formation of production benches; ripping; types of rippers; cycle of operation; Construction
of Haul roads and ramps, width, super elevation / camber, central bund, side bund, slope, base, sub-base, surface, Surface
friction, materials required, drainage, curve, visibility, machines to be used, maintenance, monitoring, Haul road
crossings, T-junction, tri-junction, four-way crossings, parameters, Parking of HEMM, parking of dump trucks, GO-line
design, Shelter construction, view point construction.
Drilling; blast hole drills; performance parameters; requirement of number of drills; blasting; blast design; factors
influencing blast design; deep hold blasting; calculation of charge per hole; ground vibration; secondary blasting and
problems of blasting; environment friendly non-blasting techniques; safety aspects.
Application of concepts of Rock Mechanics for designing the methods of mining and strata control: Theories of
ground movement and strata control; strength of stooks; shaft pillar; protection of surface structures; design and stability
of structures in rock; design of support and reinforcement for underground excavations and open pits, roof management,
consolidated and unconsolidated fills, rock bolts, cable bolts, subsidence; caving of rock mass; bumps; monitoring of
rock mass performance; mechanics of rock fragmentation; Dump types, internal and out of pit dumps, Dump
construction, size, shape, Site selection and preparation for dumping, Methods of dumping, machines required for dump
construction, slope stability; slope angle, benches, berms, factors affecting slope stability, design criteria and monitoring
systems; dump stability; dump management.
Use and safe handling of explosives: blasting techniques and their relative efficiency, total cost concept and safety
precautions.
Danger from different sources of water; precautions to prevent inundation, siltation, bench and dump failures;
designing drainage system, calculation of catchment area, sump and pump capacity, water dams, retaining walls,
siltation ponds, gabion walls, water danger plans.
ANNEXURE - III
SYLLABUS FOR EXAMINATION FOR FIRST CLASS MANAGER'S EXCHANGE CERTIFICATE
(RESTRICTED TO MINES HAVING OPENCAST WORKINGS ONLY)
i. MINING LEGISLATION:
The Mines Act; the Mines Rules; the Coal Mines Regulations; the Central Electricity Authority (Measures relating to
Safety and Electric Supply) Regulations, 2010 applicable to Opencast Coal mines.
Accidents - Classification, causes and prevention. Accidents statistics and analysis. Accident reports.
Risk Management : Theory and application, baseline, continuous and issue based risk assessment, how they are applied
to technical areas, hazard identification, risk assessment techniques, Work Place Risk Assessment and Control (WRAC),
Job Safety Analysis (JSA), Risk Matrix, Risk Management Options, Hierarchy of controls, Control Effectiveness, means
of managing (minimizing or eliminating) risk, computer application and simulations, manager’s role in risk management,
due diligence, application of risk assessment and risk management with reference to due diligence, Concept of Triggered
Action Response Plan (TARP).
ii. WINNING AND WORKING
Geology: Nature and occurrence of coal seams; description of Indian coalfields; application of geology to mining;
geological structures; folds, faults, fractures, fissures etc., boring through disturbed strata; bore hole survey; indicated and
proved coal reserves; interpretation of geological maps.
24 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Opencast Mining: Mine Planning, Opening of coal seams and preparation for excavation; box cut, types; selection of
site; Layout of Opencast mine, parameters, formation of production benches; ripping; types of rippers; concept of
rippability and cycle of operation; drilling; blast hole drills; performance parameters; requirement of number of drills;
blasting; blast design; factors influencing blast design; deep hold blasting; calculation of charge per hole; ground
vibration; secondary blasting and problems and hazards related to blasting; cast blasting; environment friendly non-
blasting techniques, safety aspects.
Discontinuous / cyclic methods of excavation and transport: shovel dumper operation; applicability of electric shovel
and hydraulic excavators; cycle time and productivity calculation; estimation of equipment fleet; dragline operation; side
casting; Dragline balancing diagram; calculation of reach; cycle time; productivity calculation; bucket capacity
requirement; scrappers; types; methods of work; push pull operation etc., Bucket Wheel Excavator - operational methods
(lateral block, half block and full block etc.,)productivity calculation; continuous Surface Miner - operational methods
(wide / full base methods, wide / full bench, block mining, stepped cut, empty travel back, turn back and continuous
mining methods); conveyors; shiftable and high angle conveyors; mode of operation etc;, OITDS operator independent
truck dispatch system); in-pit crushing, Coal Handling Plants, Silo and rapid loading system, strip-mining; opencast
mining over developed coal seams; high-wall mining; safety aspects.
Extraction of Methane: Surface to Inseam Methane Drainage, Coal Bed Methane, Abandoned Mine Methane and Gas
content of Coal; Resource and Reserve estimation; Methods of drilling and precautions required while exploration and
extraction of methane; Gas production rate, project life and economy; Methods of Collection and conveying/
transportation of methane; Installation of extraction wells; Hazards involved.
Application of concepts of Rock Mechanics for designing the methods of mining and strata control: Design and
stability of structures in rock; design of support and reinforcement for open pits; Types of bench and dump slope failures,
Theories of ground movement and strata control; rock bolts, cable bolts; wire mesh; monitoring of rock mass
performance, mechanics of rock fragmentation; Dump types, internal and out of pit dumps, Dump construction, size,
shape, Site selection and preparation for dumping, Methods of dumping, machines required for dump construction,
consolidated and unconsolidated dumps, slope stability; slope angle, benches, berms, factors affecting slope stability,
design criteria and monitoring systems; dump stability; dump management.
Use and safe handling of explosives; blasting techniques and their relative efficiency, total cost concept and safety
precautions.
Danger from different sources of water; precautions to prevent inundation, siltation, bench and dump failures;
designing drainage system, calculation of catchment area, sump and pump capacity, water dams, retaining walls, siltation
ponds, gabion walls, water danger plans,
Application of numerical modeling in mine design, application of computers in mine design and operational
controls.
ANNEXURE – IV
SYLLABUS FOR EXAMINATION FOR SECOND CLASS MANAGER'S EXCHANGE CERTIFICATE
(RESTRICTED TO MINES HAVING OPENCAST WORKINGS ONLY)
i. MINING LEGISLATION:
The Mines Act; the Mines Rules; the Coal Mines Regulations and the Central Electricity Authority (Measures relating to
Safety and Electric Supply) Regulations, 2010 applicable to Opencast Coal mines.
Accidents - Their cause and prevention. Accident reports.
ii. WINNING AND WORKING
Geology: Nature and occurrence of coal seams; description of Indian coalfields; geological features of coalfields;
methods of boring, boring through disturbed strata; bore hole survey; interpretation of geological maps.
Opencast Mining: Opening of coal seams and preparation for excavation; box cut, types; selection of site; Layout of
Opencast mine, parameters, formation of production benches; ripping; types of rippers; cycle of operation; Construction
of Haul roads and ramps, width, super elevation / camber, central bund, side bund, slope, base, sub-base, surface, Surface
friction, materials required, drainage, curve, visibility, machines to be used, maintenance, monitoring, Haul road
crossings, T-junction, tri-junction, four-way crossings, parameters, Parking of HEMM, parking of dump trucks, GO-line
design, Shelter construction, view point construction.
Watering of mine roads for dust suppression, methods to be used, hazards due to overwatering, type of water spraying,
spot or strip watering.
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 25
Drilling; blast hole drills; performance parameters; requirement of number of drills; blasting; blast design; factors
influencing blast design; deep hold blasting; calculation of charge per hole; ground vibration; secondary blasting and
problems of blasting; environment friendly non-blasting techniques; safety aspects.
Application of concepts of Rock Mechanics for designing the methods of mining and strata control: Design and
stability of structures in rock; design of support and reinforcement for open pits; Types of bench and dump slope failures,
Theories of ground movement and strata control; rock bolts, cable bolts; wire mesh; monitoring of rock mass
performance, mechanics of rock fragmentation; Dump types, internal and out of pit dumps, Dump construction, size,
shape, Site selection and preparation for dumping, Methods of dumping, machines required for dump construction,
consolidated and unconsolidated dumps, slope stability; slope angle, benches, berms, factors affecting slope stability,
design criteria and monitoring systems; dump stability; dump management.
Use and safe handling of explosives: blasting techniques and their relative efficiency, total cost concept and safety
precautions.
Danger from different sources of water; precautions to prevent inundation, siltation, bench and dump failures;
designing drainage system, calculation of catchment area, sump and pump capacity, water dams, retaining walls,
siltation ponds, gabion walls, water danger plans.
ANNEXURE – V
SYLLABUS FOR EXAMINATION FOR SURVEYOR'S EXCHANGE CERTIFICATE:
(UN-RESTRICTED)
Controlled surveys: Triangulation; trilateration; application of GPS and Total Station in mine surveying.
Tachometry
Total Stations: Surveying by Total stations, errors, adjustments and applications
EDM : Principles of measurements; types; correction and selection of instrument.
Field astronomy: Astronomical terms; determination of true bearing by equal altitude method; Gyro theodolite;
principle and determination of Gyro north, astronomical triangle; conversion of time systems and precise determination
of azimuth by astronomical methods.
National grid: Map projection Cassini Lambert’s polyconic and universal transfers Mercator; transformation of
coordinates, vertical projections; mine models.
Geodesy: Geod, spheroid and ellipsoid, geocentric, geodetic and astronomical coordinates orthometric and dynamic
heights.
Photogrammetry: Introduction; scale of a vertical photograph; photographs versus maps; application of
photogrammetry and remote sensing in mining.
Correlation: Method of correlation surface and underground including Gyro Laser combination.
Theory of errors and adjustments: Causes and classification of errors; inclines of precision; laws of weight
propagation and adjustment of errors; adjustment of triangulation figures.
Surveying of flat, moderately and steeply inclined and vertical workings: control of direction and gradient in drifts
and roadways; traversing along steep working with or without auxiliary telescopes.
Area and volume calculation; different methods and their limitations: earth work and building estimation; laying out
of rail and haul road curves, gradients of haul roads / ramps, measurement of depths of incline roadways and shafts;
determination of azimuth latitude and longitude.
Borehole surveying and calculations, dip, strike, outcrop and fault problems.
Types of plans, their preparation, care, storage and preservation: legislation concerning mine plans and sections;
duties and responsibilities of surveyors.
Geological map reading.
Application of computers in mine surveying and preparation of mine plan, 3D laser profiling of surfaces and
bench / slopes.
Profiling of benches, highwall, dumps
Dump / Highwall stability monitoring using different instruments like Laser Scanner / Continuous Real Time
Monitor
26 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
ANNEXURE – VI
SYLLABUS FOR EXAMINATION FOR SURVEYOR'S EXCHANGE CERTIFICATE:
(RESTRICTED TO MINES HAVING OPENCAST WORKINGS ONLY)
Controlled surveys: Triangulation; trilateration; application of GPS and Total Station in mine surveying.
Tachometry
Total Stations: Surveying by Total stations, errors, adjustments and applications
EDM : Principles of measurements; types; correction and selection of instrument.
Field astronomy: Astronomical terms; determination of true bearing by equal altitude method; Gyro theodolite;
principle and determination of Gyro north, astronomical triangle; conversion of time systems and precise determination
of azimuth by astronomical methods.
National grid: Map projection Cassini Lambert’s polyconic and universal transfers Mercator; transformation of
coordinates, vertical projections; mine models.
Geodesy: Geod, spheroid and ellipsoid, geocentric, geodetic and astronomical coordinates orthometric and dynamic
heights.
Photogrammetry: Introduction; scale of a vertical photograph; photographs versus maps; application of
photogrammetry and remote sensing in mining.
Theory of errors and adjustments: Causes and classification of errors; inclines of precision; laws of weight
propagation and adjustment of errors; adjustment of triangulation figures.
Surveying of flat, moderately and steeply inclined and vertical workings: control of direction and gradient in drifts
and roadways; traversing along steep working with or without auxiliary telescopes.
Area and volume calculation; different methods and their limitations: earth work and building estimation; laying out
of rail and haul road curves, gradients of haul roads / ramps, measurement of depths of incline roadways and shafts;
determination of azimuth latitude and longitude.
Borehole surveying and calculations, dip, strike, outcrop and fault problems.
Types of plans for opencast workings, their preparation, care, storage and preservation: legislation concerning
mine plans and sections; duties and responsibilities of surveyors.
Geological map reading.
Application of computers in mine surveying and preparation of mine plan, 3D laser profiling of surfaces and
bench / slopes.
Profiling of benches, highwall, dumps
Dump / Highwall stability monitoring using different instruments like Laser Scanner / Continuous Real Time
Monitor
ANNEXURE – VII
SYLLABUS FOR EXAMINATION FOR OVERMAN’S EXCHANGE CERTIFICATE
(UN-RESTRICTED)
(a) General Safety and Legislation
Provisions of the Coal Mines Regulations, 2017, relating to Coal mine working; explosives and shotfiring; loading,
transportation and dumping; precautions against danger from fire, dust, gas and water and of other provisions and
Rules, enforcement of and compliance of provisions under the regulations to which overman is responsible
Writing of reports required to be made by overman under the regulations.
Hazard Identification, risk assessment and risk management, safety management plan
Mine Gases: Generation, Properties and Effects, Detection of Mine Gases, Methanometers and Multi Gas Detectors,
Gas Chromotograph, Flame Safety Lamps
Dangerous occurrences in mines and dealing with the same; accidents, their causes and preventions; accident reports;
not disturbing the place of accident.
Mine rescue; physiological effect of mine gases; rescue equipment and First Aid.
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 27
ANNEXURE – VIII
SYLLABUS FOR EXAMINATION FOR OVERMAN’S EXCHANGE CERTIFICATE:
(RESTRICTED TO MINES HAVING OPENCAST WORKINGS ONLY)
(a) General Safety and Legislation
Provisions of the Coal Mines Regulations, 2017, relating to opencast Coal mine working; explosives and shotfiring;
loading, transportation and dumping; precautions against danger from fire, dust, gas and water and of other provisions
and Rules, enforcement of and compliance of provisions under the regulations to which overman is responsible.
Writing of reports required to be made by overman under the regulations.
Hazard Identification, risk assessment and risk management, safety management plan
Dangerous occurrences in mines and dealing with the same; accidents, their causes and preventions; accident reports;
not disturbing the place of accident.
Emergency preparedness and response
Accident investigation – why and how?
(b) Methods of Working.
Nature of occurrence of coal seams; geological disturbances and their effects on working conditions; dangers and
precautionary measures while approaching geological disturbances areas.
The purpose and utility of boreholes in mines.
Opencast methods of mining; mechanized and manual methods; deep hole drilling and blasting; blast exclusion zones,
shovel and dumpers; dragline; bucket wheel excavators; surface miner; benching; maintenance of haul roads;
precautions while extracting developed pillars by opencast method and other safety precautions; methods of
reclamation; dump stability and dump construction and management; high wall mining.
Safe handling and use of explosives; simultaneous short firing; blasting in fire areas in opencast mines; safety
precautions.
Sources of danger from surface water; precaution to prevent inundation and irruption of water; water dams, water
danger plans.
Inspection of opencast workings
Reading of statutory plans.
(c) Elements of Mining Machinery.
Safety aspects and safe use of different kinds of machinery used in opencast mines e.g. blast hole drills, rippers;
scrappers; shovels; draglines; dumpers; road graders; dozers; wheel loaders; bucket wheel excavators; spreaders;
surface miners; brakes (including service and parking brakes); safety devices; codes of practices; traffic rules; unsafe
practices; use of steam and internal combustion engines in mines; Crushers.
Application of electricity in mines; safety precautions.
Belt conveyors and safety appliances.
ANNEXURE – IX
SYLLABUS FOR EXAMINATION FOR SIRDAR’S EXCHANGE CERTIFICATE:
(UN-RESTRICTED)
1. Method of examining roof and sides of working places and roadways etc.
2. Method of timbering and setting of supports, roof bolting, anchorage testing, withdrawals of supports,
Preliminary idea about Salvaging of longwall face equipment.
3. Safety issues regarding Stowing operations, working near water bodies or unconsolidated mass.
4. Examination of Sumps.
5. Shot-firing and transport and use of explosives in mines.
6. Ventilation and mine gases- elementary.
7. Safety issues in Opencast Workings over developed pillars, Working at heights, manual handling / handling of
heavy materials, Marching of heavy machines.
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 29
ANNEXURE – X
SYLLABUS FOR EXAMINATION FOR SIRDAR’S EXCHANGE CERTIFICATE:
(RESTRICTED TO MINES HAVING OPENCAST WORKINGS ONLY)
1. Method of examining high wall and sides of working places and haul roads etc.
2. Method of examining overburden / spoil dumps.
3. Shotfiring and transport and use of explosives in mines.
4. Safety issues in Opencast Workings over developed pillars, Working at heights, manual handling / handling of
heavy materials, Marching of heavy machines.
5. Preliminary idea about Reclamation operation in opencast mining.
6. Preliminary understanding about Safety Management Plan.
7. Provisions of the Coal Mines Regulations 2017 , Rules and Bye-laws made under the Mines Act 1952, relating
to the safety of persons employed in mines in general and to the duties of Sirdar’s and Shotfirer’s in particular.
8. Writing of reports.
अिधसूचना
अैल
धनबाद, 12 , 2019
सा.का.िन. 314
314(अ).— कोयला खान िविनयम, 2017 का िविनयम 22 (2) के अधीन दये गये ावधान का
अनुसरण करते Vए डु ?लीके ट माण प (ितSप माण प) देने हेतु उप िनन
-िनयम वत है:-
य द कोई >यिi खनन परी3ा बोड Fारा उसे द$त माण प कसी िजसम,
कारण से खो देता है व उससे वंिचत रहता है,
उसका कोई दोष नहD तो खनन परी3ा बोड उस >यिi Fारा दये गये माण से संतुAट होकर िननां कत शतG
है, के आधार
हेतु िविहत शु`क के साथ आवेदन प देगा। वह >यिi डु ?लीके ट माण प िनगत करने हेतु िननां कत द)ता वेज आवेदन के
3. संबंिधत खान बंधक Fारा िविन@दAट )थान पर उिचत ह)ता3र एवं मुहर यु;त िविधवत भरा Vआ संलaन प
(परिशAट 1) म, घोषणा (य द खान म, िनयोिजत है)।
-
4. उमीदवार Fारा माण प गुम होने कO घोषणा तथा थम Bेणी द<डा Sपया के
िधकारी या नोटरी के साथ 5
Fारा उठाये गये कदमो का िववरण को दशाते Vए थम Bेणी द<डािधकारी या नोटरी के सम3 उिचत कार से िलया
गया शपथ प।
30 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
6. िविधक माण प का खोने का पूण िववरण अथात उमीदवार Fारा धारत माण प कO संZया _ाम , , थाना,
िजला, राय ज म
, ितिथ, िपता का नाम, के ^ परी3ा कO ितिथ आ द के संबंध जाने माने )थानीय समाचार प म,
इस संबधं म, कािशत िवापन कO ित।
7. वह खान िजसम, उमीदवार काय करता था या कर रहा है के खान बंधक अथवा राजपित अिधकारी Fारा
उमी वार के हाल का दो पासपोट आकार कO अिभमािणत ितयाँ। अिभमाणन उमी
द , दवार के नाम के साथ
अिभमािणत ितयाँ।
9. बंधक Fारा जारी पहचान प आधार काड आ द का िविधवत अिभमािणत ितयाँ।
,
10. दशाये क ;या माण प के खाने कO सूचना पुिलस को दी गयी है तथा उसे ा?त करने के िलए आपने कौन सा
यास कया है। पुिलस पदािधकारी का ितवेदन इस महािनदेशालय को ेिषत कया जाए।
11. य द माणप आंिशक Sप से 3ित_)त है, तो उसका शेष बचा मूल भाग।
12. उमीदवार के पास इस महािनदेशालय Fारा जारी कया गया अ य वैधािनक माण प कO ित या बुलावा प कO
ित अंतरम माण प या पूव म, महािनदेशालय के साथ कया गया पाचार आ द कO ितयाँ।
,
13. य द महािनदेशालय Fारा उमीदवार को माण प जारी कया गया है क तु उमीदवार को वह ा?त नहD Vआ
है,तो साम_ी के गुम होने के संबंध म, डाक िवभाग Fारा जारी कया गया माण प।
[फा. सं. डीजीएमएस/परी3ा/सीएमआर/उप -िनयम/2018/1]
उ$प
ल साहा, अsय3 खनन परी3ा बोड (कोयला) एवं
,
इसे कसी भी >यिi Fारा िबना जानकारी या मेरी सुिवधा या मदद या मेरे बगैर दुपयोग नहD कया गया है। य द ऐसा पाया जाता
है तो मR इस कार के अपराध के िलए दोषी §ँ। मR अपने माणप को ज
त करने के अलावा कसी भी कानून के िलए खुद को
उlरदायी मानता §ँ और उपरो;त माणप के दु पयोग के कारण होने वाले सभी कार कO 3ित या नुकसान के िलए मुझे
िजमेवार माना जाए। साoय के तौर पर मै आज दनांक ___________ को अपना ह)ता3र / अँगूठे का िनशान यहाँ अं कत करता
§ँ।
आवेदक का ह)ता3र
गवाह:-
गवाह:-
(1)
(2)
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 31
परिश9ट – II
घोषणा प
िननां कत के संबंध म, िववरण िनन वत है:-
Bी ______________________________________________________________________________________
धारक:
माणप _________________________________________________________________________
ज म ितिथ _______________________________________________________________________________
िपता Bी ________________________________________________________________________________
परी3ा के ^ _______________________________________________________________________________
बंधक का ह)ता3र
खान / कोिलयरी का नाम
कायालय का मुहर
दनांक ___________________
NOTIFICATION
Dhanbad, the 12th April, 2019
G.S.R. 314(E).—In accordance with the provisions laid down under Regulations 22 (2) of the Coal
Mines Regulations 2017, the Bye-laws for delivery of Duplicate certificates are published below.
If any person proves to the satisfaction of the Board that he / she has without any fault on his / her part, lost or
been deprived of a certificate granted to him / her, the Board may deliver a Duplicate Certificate subject to the
following conditions:
The person who has lost or been deprived of a certificate granted to him / her shall submit an application to
the Board alongwith the fee prescribed under sub-regulation (1) of Regulation 20 for issue of Duplicate
Certificate. The following documents shall be submitted by the person along with the application for
Duplicate certificate:-
1. Photo copy of the lost Certificate
2. Self attested copy of certificates submitted at the time of issue of lost certificates (Copy of SSC,
HSC, Diploma, Degree, etc.)
32 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
3. A declaration in enclosed Form (Annexure – I) duly filled in and signed by the concerned Mine
Manager at the specified place with office seal (If employed in a Mine)
4. A declaration regarding loss of certificate by the candidate and sworn in before 1st Class Magistrate
or Notary with Court stamp of Rs. 5 /- affixed.
5. An affidavit properly sworn in before 1st Class Magistrate or a Notary public stating there in the
circumstances under which the candidate have been deprived of the certificate by loss or otherwise
and details of steps taken by him to recover the same.
6. A Copy of advertisement published in a prominent Local News Paper regarding loss of Statutory
certificate(s) with the full particulars i.e. type of certificate number hold by, village, Thana, District,
State, Date of Birth, Father's Name, Centre, Date of Examination etc.
7. Two copies of candidate’s passport size recent photographs attested by a Gazetted Officer or
Manager of the Mine where he worked or working Attestation should be made on front side of the
photographs with name of the candidate.
8. Two copies of left thumb impression of the candidate on a white paper dully Attested by Manager/
Gazetted Officer.
9. Copy of Identity Card issued by the management, Aadhar card, etc. duly attested.
10. State whether the loss of the certificate(s) has / have been reported to the police and what efforts you
have made to recover the same. The report of the Police authority should be sent to this Directorate.
11. Balance part of the certificate in original, in case the certificate is partly damaged.
12. Copy of any other statutory certificate issued by this Directorate held by the candidate or copy of
Call letter, provisional certificate or previous correspondence with this Directorate, etc.
13. Certificate issued from the post office regarding loss of article if the Certificate has been issued by
this Directorate but the candidate has not received it.
[F. No. DGMS/EXAMS/CMR/BYE LAWS/2018/1]
UTPAL SAHA, Chairman, Board of Mining Examinations (Coal) &
Director General of Mines Safety
ANNEXURE - I
FORM OF UNDERTAKING TO BE TAKEN FROM APPLICANTS FOR THE ISSUE OF
DUPLICATE CERTIFICATE
I ---------------------------------------------------- Son of --------------------------------------- working at / residing at -
--------------------------------------- do hereby solemnly declare an oath that the ----------------------------------------
---- of competency bearing number(s) ---------------------------------------------------------------- was / were lost /
destroyed under circumstances beyond my control and without any fault on my part and it could not be traced
and recovered in spite of my best and sincere effort.
That is / was not abused of pressed into service by any one without knowledge or my convenience or at my
instance and that, in case it is found that I am guilt / of any such acts of malfeasance or misfeasance. I will,
hereby hold myself liable for any law besides forfeiting my certificate(s) and that I will also hold myself
responsible for all the loss or damage that may be caused by such abuse of the above certificate.
In witness where as I here to affix my signature / thumb mark on this day of --------------------------------------
Signature of applicant
Witness:-
(1)
(2)
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 33
ANNEXURE – II
DECLARATION FROM
THE FOLLOWING ARE THE PARATICULARS IN RESPECT OF:-
Shri ………………………………………………………………………………….……………………………
Holder of …………………………………………………………………………….…………………………..
Certificate(s) …………………………………………………………………………………………………....
No.(s) …………………………………………………………………………………………………………
1. Name (in full) …………………………………………………………………………………………..
2. Permanent Address ……………………………………………………………………………………
Vill. …………………………………..………….... P.S. …………………..…………………………..……
District …………………………………………… State ……………………………………………………..
Date of Birth …………………………………………………………….……………………………………
Name of Father ………………………………………………………………………………………………….
Centre of examination ..........…………………………………………………………………………………
Date of examination ………………………………………………………………………………………….
(Signature of Manager)
Name of Mine/Colliery
Official Seal
Date: ……………………………
अिधसूचना
सा.का.िन. 315(
315(अ).—कोयला खान िविनयम, 2017 का िविनयम 24 (2) के तहत दये ावधान
गये का अनुसरण
_िसत
दुराचार से >यिi इसम,
है तथा वैसा ( आगे इसे दोषी कहा गया है) इस कार माणप
का योaय
धारण करने के िलए
नहD
है या म,
, के संबंध कO eया
जाँच पड़ताल करने िनयम हेतु उप- का िववरण िनन हR
वत :—
ािधकृ त िनरी3क )त
कर सकता है, जो के नहD र से नीचे का हो तथा िजसका रपोट उ;त मत का आधार बना है।
2.0बोड पूव
, पूछताछ या जाँच पड़ताल के दोषी को मामला का िववरण देगा, िजस पर जाँच कया जाना है।
3.0 ऐसी पूछताछ या पड़ताल के दौरान जाँच-पड़ताल करनेवाला ािधकृ त िनरी3क को सभी संगत कागजात
(ङ) जो क जाँच-पड़ताल करने वाले िनरी3क के अनुसार िवचार हेतु आव:यक है या संबि
ं धत है कोई अ य
साoय ।
4.0 जब तक दोषी पया?त सूचना के बावजूद हािजर होने म, िवफल होता है, उपरो;त साoय को दोषी के सम3
अिभिलिखत कया जाएगा तथा उसे गवाह (उसके Fारा )तु कये
त गये गवाह से िभ न) से पूछताछ का उिचत अवसर दान
कया जायेगा। जाँच – िनरी3क भी दोषी तथा गवाह से पूछताछ कर सकते हR।
[फा. सं. डीजीएमएस/परी3ा/सीएमआर/उप -िनयम/2018/1]
NOTIFICATION
Dhanbad, the 12th April, 2019
G.S.R. 315(E).—In accordance with the provisions laid down under Regulations 24 (2) of the Coal Mines
Regulations 2017, the Bye-laws for procedure to hold an enquiry to determine whether or not the holder of a Manager’s
Certificate, Surveyor’s Certificate, Overman’s Certificate, Sirdar’s Certificate, Engine Driver’s Certificate or Gas Testing
Certificate is incompetent or is guilty of negligence or misconduct in the performance of his duties under the Act or
under these regulations and such a person (hereinafter referred to as the delinquent) is fit to continue to hold such
certificate are published below-.
1.0 The Board may, on the report of the Regional Inspector under Regulation 24 (1), authorise an Inspector, not
below the rank of the Inspector whose report formed the basis of the said opinion.
2.0 The Board shall, before the enquiry, furnish to the delinquent a statement of the case on which the enquiry is
instituted.
3.0 During such enquiry, the Inspector authorised to conduct the enquiry shall be provided with all relevant
documents and he shall record:
(a) the evidence of any witness that formed the basis of the said opinion;
(b) any evidence that the delinquent may like to give;
(c) the evidence of any witness that the delinquent may like to produce;
(d) the evidence of Manager of the mine; and
(e) any other evidence that may be considered necessary or relevant by the Inspector conducting the enquiry.
4.0 Unless the delinquent fails to be present in spite of sufficient notice, the evidence aforesaid shall recorded in the
presence of the delinquent and he / she shall be given a reasonable opportunity to cross-examine the witness (other than
those produced by him / her). The Inspector conducting the enquiry also may cross-examine the delinquent and the
witnesses.
[F. No. DGMS/EXAMS/CMR/BYE LAWS/2018/1]
UTPAL SAHA, Chairman, Board of Mining Examinations (Coal) &
Director General of Mines Safety
अिधसूचना
2.0 उमीदवार कO पहचान:- जाँच ािधकारी उमीदवार िन¨ां कत कसी के द)तावेज एक मूल के आधार पर पहचान
(ii) जाँच पदािधकारी इन उप- िनयम िFतीय म, दये प म, िच क$सा रपोट
के अनुसूची गये तैयार करे गा।
1952 तथा कोयला खान िविनयम 2017 एवं इसके आदेश )वं िनधारत दािय$व
के तहत य के िलए को पूरा करने
हेतु एक वष काय
के अंदर )व)थ
करने के िलए िच क$सी )व)थता माण प ा?त नहD
घोिषत करने हेतु य - कर लेता
है।
सं. डीजीएमएस/परी3ा/सीएमआर/उप
[फा. -िनयम/2018/1]
बन सक, ।
2. उमीदवार कO सम_ Bवण शिi अmछी होनी चािहए तथा कान कसी भी कार के गामी रोग से मु;त होना चािहए
5. उमीदवार पेट संबिं धत बीमारी से _िसत नहD होना चािहए िजससे उसके दैिनक काय म, बाधा उ$प न
, हो।
6. हzनया रोग से _िसत उमीदवार के मामले म, य द जाँच अिधकारी का मत है क इसे बे`ट के इ)तेमाल से भावी तौर पर
िनयंित कया जा सकता है तो उमीदवार को उस समय के िलए योaय बनाया जा सकता हR। उपरोi अ य मामल म,
,
सफल श`य िच क$सा के उपरा त ही उमीदवार को योaय घोिषत कया जा सकता है।
7. य द उमीदवार को हाइ4ोसील कO िशकायत है बड़ा नहD होना चािहए क वह उसके सामा य
, तो यह इतना गितिविधयाँ
म, बाधा हो और ऐसे मामल म, सफल श`य िच क$सा के उपरा त ही उमीदवार को योaय घोिषत कया जा सकता है।
8. बाजुएँ सु>यवि)थत िवकिसत तथा सामा य Sप से काय करने लायक होना चािहए।
,
इनकO उp वष है।
__________
उमीदवार का / कO पहचान िच «
(क) __________________ उमीदवार का हाल का पासपोट
(ख) __________________
फोटो िजसम, उमी दवार का
5. कान
Bवणता__________________
6. :वसन णाली:
छाती कO माप
(i) पूणत: :वास छोड़ने के उपरा त ________सेमी.
परBवण िनAकष:
अ य असामा यताएं
7. परसंचरण णाली
नाड़ी )पं दन________ ित िमनट
र;त दाब________िममी पारा म,
Pदय गित – S1
– S2
8. उदर:
कोमलता __________
यकृत __________
?ली हा __________
ूमर __________
9. तंिका णाली
दौरा या िमग| का इितहास __________
?ला टर __________
16 . अ वे षण :
शक रा :
(घ) र;त बायो रसायन
क तु सतह / खुली खान म, वैधािनक तौर पर अपना काय जारी रख सकता है।
जाँच अिधकारी का ह)ता3र एवं ितिथ
पदनाम: ____________________________
(मुहर)
)था न : _____________
ितिथ : _____________
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 39
NOTIFICATION
Dhanbad, the 12th April, 2019
G.S.R. 316(E).—In accordance with the provisions laid down under Regulations 25 (2) of the Coal Mines
Regulations 2017, the Bye-laws for the conduct of Medical Examination and grant of medical certificate of fitness are
published below-
1.0 Examining Authority: The medical examination shall be carried out by a qualified medical practitioner not
below the rank of a Assistant Civil Surgeon or by a Medical Officer appointed for the mine or a Medical Officer
in the employment of the owner of the mine, if any, holding at least a degree in Bachelor of Medicines and
Bachelor of Surgery (M.B.B.S.) registered with Medical Council of India.
2.0 Identity of the candidate: The examining authority shall verify the identity of the candidate with Original
documents of any one of the following: Aadhaar Card, Electors photo Identity Cards (EPIC), passport, driving
licence, service identity card of state or central government, PAN card, passbook issued by bank or post office,
MGNREGA job card, health insurance card issued by ministry of labour and pension document with
photograph. He shall also verify the Original Statutory Certificate issued by the Board of Mining Examinations
before medically examining the candidate.
3.0 Standard and report of medical examination:
(i) For ascertaining the freedom of a person from deafness, defective vision or any other infirmity, mental or
physical, likely to interfere with the efficient discharge of his duties, the examining authority shall medically
examine the candidate in accordance with the standard laid down in the First Schedule of these bye-laws.
(ii) The examining authority shall prepare the medical report in the form as mentioned in Second Schedule of
these bye-laws.
4.0 Unfit persons not to be employed: Where, as a result of medical examination made under clause 3.0, a person
has been declared unfit for employment in mines or in a particular category of mines or in any specified
operations in mine, he shall not be employed or continue to be employed in a mine or in the category of mines.
5.0 Duties and Responsibilities of Owners, Agents and Managers: It shall be the duty of the owner, agent or
manager to ensure that no person shall act as a manager or an official or a winding engineman in a mine after
attaining the age of sixty years unless he has obtained, within the preceding one year, a medical certificate of
fitness certifying him fit to carry out the duties prescribed for him in the Mines Act, 1952 and in the Coal Mines
Regulations, 2017 and orders made thereunder.
[F. No. DGMS/EXAMS/CMR/BYE LAWS/2018/1]
UTPAL SAHA, Chairman, Board of Mining Examinations (Coal) &
Director General of Mines Safety
FIRST SCHEDULE
STANDARD OF PHYSICAL FITNESS
1. A candidate must be in good physical and mental health and free from any physical defect, likely to
interfere with his / her efficient employment in the mine and which will not cause any hindrance in
discharging his / her daily duty.
2. The candidate’s overall hearing must be good and there should not be any progressive disease in the
ear, affecting his / her hearing or he / she should not suffer from any occupational deafness.
3. In case of the vision of the candidate, the following standards of visual acuity, with or without glasses,
should be strictly observed:
a) For underground workers
Better eye 6/6
Worse eye 6/9
b) For surface/opencast workers
Better eye 6/12
Worse eye 6/18
4. There should not be any active disease of the heart and lungs.
40 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
5. There should be no disease of abdominal organs which may cause hindrance in discharging the
candidate’s day-today duties.
6. In case the candidate has hernia, and the Examining Authority is of the opinion that it can be
effectively controlled by the use of truss, the candidate can be made fit for the time being. In all other
cases the candidate can be declared fit only after a successful operation for the same.
7. Hydrocele, if present, should not be large enough to impede his normal activities, in such cases the
candidate can be declared fit only after its successful operation.
8. The limbs should be well formed and developed, and function of all limbs should be within normal
limits.
9. Candidate should be free from chronic skin disease.
10. There should not be any congenital malformation, or defect, or any deformity likely to interfere with
candidate's normal duties.
SECOND SCHEDULE
REPORT OF MEDICAL EXAMINATON
I do hereby certify that I have examined _____________________________________Certificate No.
_____________________ . He / She appear to be __________________________ years of age.
The identification marks of the Candidate.
Recent Colour
(a) _________________________________. passport size
Photograph of
candidate. Front
(b) _________________________________. side of the
photograph should
be signed by the
candidate.
Left thumb impression of the candidate:
The findings of the Examining Authority in respect the health of the candidate are as follows:-
1. General conformation Good / Fair / Poor
2. Height _________ cms.
3. Weight _________ Kg.
4. Eyes
Visual Acuity: Distant Vision
Right Eye ____________ Left Eye ____________(Uncorrected)
Right Eye ____________ Left Eye ___________ (Corrected)
5. Ears: Right Ear Left Ear
Hearing _________ ___________
Any organic disease _________ ____________
6. Respiratory System:
Chest measurement
(i) after full expiration __________ cms.
(ii) after full inspiration __________ cms.
Auscultation finding: ________________________
Other Abnormalities ___________________________
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 41
7. Circulatory system:
Pulse ______ per minute
Blood Pressure __________mm of Hg
Heart Sound- S1
S2
Murmur – present/absent
Any other Abnormalities _________________________________________________
8. Abdomen ;
Tenderness __________
Liver __________
Spleen __________
Tumour __________
Other Abnormalities _________________________________________________
9. Nervous System:
History of fits or epilepsy ______________
Sensory function ______________
Motor function ______________
Planter ______________
Mental Health ______________
Any other Abnormalities _________________________________________________
10. Genito-Urinary System: ________________________________________________
11. Locomotor System ______________________________________________________
12. Skin : ____________________________________________________________________
13. Hydrocele : Present / Absent
14. Hernia : Present / Absent
15. Any other abnormality: __________________________________________________
16. Investigation
A. Chest Radiograph (PA view)
B. Electro cardiogram (ECG)
C. Urine routine
Reaction :
Albumin :
Sugar :
D. Blood Bio chemistry
i) Blood Sugar: Fasting/Postprandial
ii) Blood Urea _________________ Serum Creatinine _______________
iii) Lipid Profile
19. Any other investigation or opinion of specialist considered necessary by the Examining Authority:
___________________________________________________________________
20. Remark if any: _________________________________________________________
21. Opinion of the Examining Authority:
a. I consider that he/she is fit to perform his/her statutory duties in mines for a period of one year.
b. I consider him / her unfit to perform statutory duties in mines because of
_________________________________________________ (mentioned disability).
42 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
ALOK Digitally
and Published by the Controller of Publications, Delhi-110054.
signed
by ALOK KUMAR