Professional Documents
Culture Documents
ACTIX Optimization PDF
ACTIX Optimization PDF
GSM900/1800 网络优化软件
1.ACTIX 网络优化分析平台,支持 Um 接口路测(Drive Test)仪表(如 TEMS,Aigent,64,74 系列
ASCOM 等)数据分析,Abis 接口, A 接口数据分析(Tekronix K1205).
2.GPRS Gb 网络优化
5.各种统计功能,统计接通率,掉话率,电路使用率,切换成功/失败率等
6.报告自动生成,及自定义报告格式.
例 1 : invalid results due to limited number of samples.
Link balance 解决 :
Level correction :
Corrected DL level is obtained by compensating the DL receive level with the Base
Station power reduction due to Power Control. This can be obtained from the following
combination of attributes :
Corrected DL level = ServRxLev + 2*ServBsPowStepActual
as each power control step in GSM coding represents 2 dB.
Similarly, a correction of the UL level is obtained from :
Corrected DL level = ULRxLevFull + 2*ServMsTxPowStepActual
Example 1 : 简单检查
Example 2 : detailed link balance analysis with linear regression
举例 3:
Example 4: TA analysis as a function of RxLev reveals a traffic spot away from the cell
main serving area.
Example 5: Analysis of poor quality contributors shows average TA is growing as quality
decreases, and average level is low and getting lower as quality decreases. This points
to a quality problem linked to lack of coverage.
举例 4 :路径衰减分析
Example 1 : Path balance statistical distribution at cell level. Note that an estimation of
the influence of invalid measurements in the trace is computed as additional information.
Example 2 : Comparative Path Balance analysis at TRX and timeslot level. Note that
small differences (<2 dB) between TRX and even timeslot values do not mean that there
is a particular problem on the cell. Only bigger differences should be taken seriously.
Example 3 : Path Balance detailed analysis. Note the non-linearity at lower DL levels.
However, in this example the number of valid samples at low level is too small for the
results to be reliable.
举例 5 :切换分析
The first part looks at the average quality in windows just before and just after the Ho,
and compares them to the overall quality of the trace.
结合路测数据分析,提供经纬度及测试路径
举例 :结合网络规划分析切换原因