KEN GUARD 402
MULTI PURPOSE EPOXY
DESCRIPTION
Multi purpose high build polyamide cured epoxy
PRINCIPAL CHARACTERISTICS
~ Good corrosion resistance.
= Good addition property.
* Suitable as prime coat for both steel, galvanized steel and
‘nonferrous metals tobe used in immersion and atmospheric
type paint
chlorinated rubber, epoxy/coal iar and pol
stance,
: dry blast cleaned sut
~ Good water resistance.
RECOM
DED USE
High performance primer or built coat for durable systems
‘with wide range of protective
SPECIFICATION DATA AT 20°C
KEN GUARD 402
cL MULTIPURPOSE EPORY
CONDITION OF APPLICATION
‘Temperature: minimum 5°C ; maximum 50°C.
Relative humidity: maximum 85%
Substrate temperature should be atleast 3°C above dew point
SYSTEM SPECIFICATION
‘Can be top coated with all paint types (alk
1, epoxy, coal tar
INSTRUCTION FOR USE.
ided after mixing the compon:
esult in lower sag resistance and slower
+ Thinner should be added after mixing components.
Glos Fae APPLICATION DETAILS
Spee gatiy T205 itive tia atapgleen 1 [WSN] Ta
Biya oe Me ane [ ena
Reconbandel by 50-128 microns [tise Nectegt eaie
‘Wet: 84209 microns ‘Nozzle orific O.018 (0.46) 152
Cove ages AP ine S0 microns 48 nz /lne 125 microns Nene ee eo
So [ orm [ ce ame
32°C 5.5 hours Over coating table for other products.
36°C
40°C
5, aa
Nie See
SURFACE PREPARATION
‘Steel: blast cleaned in situ to atleast SSPC-SP 10 and.
free from rust, scale, shop primer and any other
contamination,
4