Professional Documents
Culture Documents
Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
PULLERS, VISES
& C-CLAMPS
Pullers are tools used to remove pieces that were press-fitted when
assembled. Vises and c-clamps allow the user to fasten two or more
items to work on them. For example, machinery, internal combustion
engines, transmissions, and at the woodworking, heavy, and oil industries.
The majority of these tools have a threaded shaft; and straight, internal
and external, fixed, adjustable and reversible jaws, forged for greater
resistance.
The pullers, vises, and c-clamps presented in this chapter are classified
as extraction and fastening tools because they are designed to extract
and fasten pieces that by design were required to be press-fitted. Made
of different materials and available in different sizes, there are jaw pullers,
pulley pullers, steering wheel pullers, adjustable pullers, reversible
pullers, gear and bearing separators, workbench vises, c-clamps, and
much more.
• Are a great line of products with more than 95 extraction and fastening
tools.
- Adjustable, reversible, fixed and separators.
- Steel c-clamps and jaws, internal and external jaws.
- Capacity in tons.
- From 2 to 10 tons.
• Workbench vise jaw pads have machined teeth for more reliable
clamping.
• Technical standards.
• Detailed product specifications.
• Recommended uses.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
PULLERS
541
WORKBENCH VISES
551
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
TECHNICAL STANDARDS
URREA manufactures In the United States there are various associations the user to fasten two or more items so they can
that issue or used to issue standards, such as be worked on.
its tools following GSA/US FEDERAL and ASME.
technical standards. Pullers, vises, and c-clamps are manufactured
Hand tool standards known as Federal (in Mexico) with high-quality alloy steel. They undergo a
A product technical standard is a document are no longer updated and are being absorbed heat treatment process in controlled atmosphere
specifying design and manufacturing guidelines by ASME. The same is happening to standards furnaces so they attain high resistance.
to ensure adequate product performance under issued by ANSI.
conditions that meet users’ requirements. These The technical specifications followed to design
standards are issued by private or government Nowadays, ASME hand tool standards are initially and make pullers, vises, and c-clamps are based
bodies and associations. reviewed by committees formed by different tool on technical standards like those issued by ASME/
manufacturers, users, and distributors so they can ANSI and GSA/US FEDERAL.
The only organization to issue international be approved and issued by ASME.
standards is known as ISO (International URREA offers pullers with a wide range of load
Organization for Standardization). It issues the ISO Pullers are tools used to remove items that capabilities, from 2 to 10 tons, as well as vises
9000 series, related to quality systems, although were press-fitted when assembled like pulleys, and c-clamps with openings from 2" up to 12".
it also issues product technical standards. bearings, bushings, etc. Vises and c-clamps allow
GGG-P-643 A “Specification puller kit, mechanical” B107.46M “stud, screw, and pipe extractors: safety requirements”
GGG-P-0078IC “Puller attachment, Mechanical, and puller set, B107.52M “Nail Puller Bars: Safety Requirements”
mechanical”
GGG-P-78ID “Puller, mechanical, puller, attachment, and puller
set mechanical”
GGG-V-410A “Vise, bench, clamp base; sheet metal works;
bench and pipe; jeweler’s machinist’s and
multiposition”
GGG-V-412A “Vise; hand; pin; Wire pope splicing; and square
end sawing, tube”
GGG-V-415A “Vise, pipe”
538
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
PULLERS, VISES
&
10.0 11.5 13.0 14.5 16.0 17.5 19.0 Ton.
C-CLAMPS
MOST COMMON PULLERS
There are 3 basic extraction problems. Start by identifying the type of extraction The following illustrations showcase the three most common cases:
problem at hand.
NEED DESCRIPTION APPLICATION TOOL REQUIRED
13
PULL Removal of gears, bearings, *2 or 3 jaw puller
(SEPARATE) pulleys, etc. *Side hammer puller
SOMETHING To replace or take another *Combination of jaw puller and
FROM A SHAFT part. bearing separator
Once the extraction problem has been identified you can select the puller that will meet those needs. For best results and greater safety, it is especially
important to use the appropriate tool to tackle the problem. To select the appropriate extraction tool you need to:
1. Select the extraction tool or required combination.
2. Determine the required reach (A).
- The selected puller must have a reach equal to or greater than what you estimate necessary for removal of the item.
3. Determine the spread (B) the item will require.
- The item's width will determine the spread required.
4. Consider the jaw's thickness (C) and width (D).
5. Estimate the force required. A puller with the right reach and spread has to be strong enough for the job. However, it is always recommended to use a
puller with a spread and reach greater than those of the item that will be removed, especially when the part is rough or when the "resistance area" is big,
since greater force might be required.
Manual extraction tools require that the puller's screw moves smoothly and that the item's reach and spread are known. These measurements have to be
compared with those specified for each URREA puller presented in this chapter.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
HEAD: Puller's body onto which the jaws and forcing screw are
mounted.
CLIP: Die-cut and hardened metal clips hold the jaws to the puller's
body.
CODE CASES HEAD METAL FORCING SHORT DOUBLE NARROW SCREW TOTAL TONS
CLIPS SCREWS JAWS REACH JAWS HEAD PIECES
JAWS JAW
1 2 3 4 5 6 7 8
4216 - 1 6 1 3 3 3 3 20 6
4212SJB 1 1 4 1 2 2 2 2 14 6
4212SJ - 1 4 1 2 2 2 2 14 6
4030B 1 1 4 1 2 2 2 2 14 10
4030 - 1 4 1 2 2 2 2 14 10
4234B 1 1 4 1 - 2 2 2 12 10
4234 - 1 4 1 - 2 2 2 12 10
4238B 1 1 2 1 - 2 - 2 8 10
4238 - 1 2 1 - 2 - 2 8 10
4232SJB 1 1 2 1 2 2 - - 8 10
4232SJ - 1 2 1 2 2 - - 8 10
540
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Interchangeable and
PULLERS, VISES
adjustable jaws, great for
&
different types of extractions.
C-CLAMPS
4216 20-PIECE SET 4216 SPECIFICATIONS
13
DESCRIPTION QTY. in. mm in. mm in. mm in. mm in. mm in. mm in. mm gm lb.
3-way head 1 2 5/8 66.68 4 101.6 5 7/16 138 5 1/2 139 4 5/8 117.4 6 152.4 1 1/8 28.58 3,500 7.71
Clips 6
Forcing screws 1
Short jaws 3
Long jaws 3 For extracting different diameters of pulleys.
Narrow jaws 3 Forcing screw with sharp, reinforced tip.
Screw head jaws 3 Forged head of high-resistance steel, 3-way 4216.
ASME / ANSI B107.46M, ASME / ANSI B107.52M, FEDERAL GGG-P-781 6-ton strength.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
DESCRIPTION QTY.
Head 1
Clips 4
Forcing screw 1
Short jaws 2
Long jaws 2
Narrow jaws 2 4212SJ
Screw head jaws 2 4212SJB WITH OUT METAL BOX
Metal box (code 4219) 1
WITH METAL BOX
ASME / ANSI B107.46M, ASME / ANSI B107.52M, FEDERAL GGG-P-781
4211 4212
4211 4212
HEAD FOR 6-TON PULLER FORCING SCREW FOR 6-TON PULLER
LENGTH HEIGHT WIDTH CAPACITY MATERIAL HARDNESS LENGTH DIAMETER HEXAGON CAPACITY MATERIAL HARDNESS
& THREAD
in. mm in. mm in. mm tons SAE HRC lb. gm in. mm in. mm tons SAE HRC lb. gm
7 3/8 187.33 1 1/8 28.58 1 1/8 28.58 6 5132M 36-40 1.020739 463 7 7/8 200.03 9/16-12UNC-2A 5/8 15.88 6 5132M 42-46 0.4762 216
4211S 4215Q
4211S
JAW SAFETY CLIP FOR 6-TON PULLER SPARE PARTS FOR
LENGTH HEIGHT WIDTH CALIBRE MATERIAL HARDNESS 6-TON STRAIGHT JAW PULLERS
CODE DESCRIPTION
in. mm in. mm in. mm # in. mm HRC lb. gm
7/8 22.225 5/8 15.88 13/32 10.31 24 0.025 0.64 1075 35-40 0.01056 4.79 4215Q Short jaw 4” reach
4216Q Long jaw 5 1/2” reach
4217Q Angular jaw 5 7/16” reach
4218Q Screw head jaw 2 5/8” reach
542
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
12-PIECE SET
PULLERS, VISES
10-TON PULLERS
&
2-WAY, 6 JAWS
C-CLAMPS
4234B 4234
4234B AND 4234 SET CONTENTS
WITH METAL BOX WITH OUT METAL BOX
DESCRIPTION QTY.
Head 1
Clips 4
Forcing screw 1
Double reach jaws 2
4234B, 4234 SPECIFICATIONS
Narrow jaws 2
CODE JAW MAXIMUM SCREW'S JAW'S HEAD Screw head jaws 2
REACH EXPOSED MAXIMUM HEIGHT Metal box (code 4019)
13
1
DISTANCE SPREAD ASME / ANSI B107.46M, ASME / ANSI B107.52M, FEDERAL GGG-P-781
A B C D E F
in. mm in. mm in. mm in. mm in. mm in. mm gm lb.
4234B 3 76.2 7 177.8 7 9/32 184.9 8 9/16 217.5 10 254 1 5/8 41.3 5,100 11.24
4234 3 76.2 7 177.8 7 9/32 184.9 8 9/16 217.5 10 254 1 5/8 41.3 4,540 10.01
8-PIECE SET
10-TON PULLERS
2-WAY, 4 JAWS
4238B 4238
WITH METAL BOX WITH OUT METAL BOX 4238B AND 4238 SET CONTENTS
DESCRIPTION QTY.
Head 1
Clips 2
Forcing screw 1
4238B, 4238 SPECIFICATIONS Double reach jaws 2
CODE JAW MAXIMUM SCREW'S JAWS HEAD Screw head jaws 2
REACH EXPOSED MAXIMUM HEIGHT Metal box (code 4019) 1
DISTANCE SPREAD ASME / ANSI B107.46M, ASME / ANSI B107.52M, FEDERAL GGG-P-781
A B C D E
in. mm in. mm in. mm in. mm in. mm gm lb.
4238B 3 76.2 7 9/32 184.9 8 9/16 217.5 10 254 1 5/8 41.3 4,200 9.26
4238 3 76.2 7 9/32 184.9 8 9/16 217.5 10 254 1 5/8 41.3 3,650 8.05
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
4011 4012S
4011 4012S
HEAD FOR 10-TON PULLER FORCING SCREW FOR 10-TON PULLER
LENGTH HEIGHT WIDTH CAPACITY MATERIAL HARDNESS LENGTH DIAMETER HEXAGON CAPACITY MATERIAL HARDNESS
& THREAD
in. mm in. mm in. mm tons SAE HRC lb. gm
in. mm in. mm tons SAE HRC lb. gm
11 279.4 1 5/8 41.27 1 5/8 41.27 10 5132M 36-40 2,799867 1270
10 9/16 268.27 3/4-10UNC-2A 3/4 19.05 10 5132M 42-46 1.0802 490
4011S
4015
4011S
JAW SAFETY CLIP FOR 10-TON PULLER SPARE PARTS FOR
LENGTH HEIGHT WIDTH CALIBRE MATERIAL HARDNESS
10-TON STRAIGHT JAW PULLERS
544
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
4033 4034
PULLERS, VISES
&
C-CLAMPS
ADJUSTABLE ADJUSTABLE STRAIGHT STRAIGHT
Adjustable jaw pullers feature a wider spread than their straight jaw
counterparts.
In addition, they can reach places that straight jaw pullers are unable
4044 4046 to.
4033 4034
(A) (B)
13
2-JAW PULLER WITH 2 POSITIONS 3-JAW PULLER WITH 2 POSITIONS
DESCRIPTION JAW NUMBER SPREAD REACH CAPACITY DESCRIPTION JAW NUMBER SPREAD CAPACITY
TYPE OF CAPACITY TONS TYPE OF CAPACITY TONS
JAWS JAWS B
A
Adjustable puller 3-way 3 4 101.6 3 1/2 88.90 2 750 1.65
in. mm in. mm gm lb. adjustable
Adjustable puller 2-way 2 4 101.6 3 1/2 88.90 2 415 0.91 STANDARD: FEDERAL GGG-P-781
adjustable
For pulling different diameter pulleys.
STANDARD: FEDERAL GGG-P-781
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
4285
6-TON, 2- OR 3-WAY HAMMER PULLER WITH 3 ACCESSORIES
4270A
4270A 4277
6-TON 3-WAY HAMMER PULLER 4277
6 TON HAMMER PULLER,
JAWS JAWS' TOE INTERNAL EXTERNAL SHAFT INTERCHANGEABLE TIPS
REACH CAPACITY CAPACITY LENGTH
DISTANCE Min. Max. Min. Max. Hammer Total Wt. CIRCULAR SCREW PULLS
in. mm in. mm in. mm in. mm in. mm in. mm gm. lb. gm. lb. RANGE
3 1 7/8 47.63 1 1/2 38.10 4 1/4 107.75 1 1/2 38.10 4 1/2 114.30 22 7/16 570 2,268 5.00 3,200 7.05 gm lb.
4 1/2” to 5 1/2” ITS DESIGN ALLOWS USE 4,250 9.37
IN AXLES WITH 4, 5, OR 6
STANDARD: FEDERAL GGG-P-781 ACCESSORIES: LUGS IN A CIRCLE
5 lb. hammer
ACCESSORIES:
5/8"-18" Bar with 22" stroke
A hook jaw that removes gears, bushings, fasteners, and bearing tracks.
Extracts lugs and components in transmission driveshafts
A jaw that pulls generator and starter bearings.
STANDARD: FEDERAL GGG-P-781
A bar that pulls pulleys and gears with threaded holes.
546
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
PULLERS, VISES
puller cannot reach. Adjusting nut controls base 4334 5 7/8 149.23 7 7/8 200.03 1 - 12 NF 13.00 330.2 1” - 12 NF
&
separation. STANDARDS: FEDERAL GGG-P-781
C-CLAMPS
HARMONIC BALANCER PULLERS
This set contains all the necessary accessories to remove steering wheels from domestic and foreign vehicles, as well as from light
SUV's. It is also useful to pull out things such as bearings, gears, and pulleys. Made of steel. Universal design fits a great variety of
13
removable pieces.
The forcing
screw is
designed to
create strong 4205A 27-PIECE SET
pushing force so
the object being HARMONIC BALANCER
removed comes PULLER SET
loose.
TOTAL PIECES CONTENTS
PIECES
gm lb.
27 3 3/8” - 16” x 4” bolt 2,015 4.44
3 3/8” - 24” x 2” bolt
3 5/16” - 18” x 2” bolt
3 M8 x 1.25 x 80 mm bolt
3 M10 - 1.50 x 50 mm bolt
2 1/4” - 28” x 3” bolt
2 5/16” - 24” x 3 1/2” bolt
3 5/16” - 18” x 4 1/2” bolt
1 5/8” x 5” center bolt (pointed)
1 5/8” x 6 1/2” center bolt (pointed)
Fastening screws are 1 Yoke
4205A made of heat-treated 2 Rotating caps
steel. 1 Plastic box
* Packaged in plastic tray
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
PULLERS GEAR/BEARING
SEPARATORS
AUTOMOTIVE SCREW
EXTRACTORS
WORKBENCH
VISES
PREC. VISES
& C-CLAMPS
PULLERS
PIECES CONTENTS
gm lb.
3 3/8” - 16” x 4” bolt 1,500 3.31
2 3/8” - 24” x 2” bolt
3 5/16” - 18” x 2” bolt
3 M8 x 1.25 x 80 mm bolt
3 M10 - 1.50 x 50 mm bolt 4050
1 5/8” x 5” center bolt 4050 6-PIECE SET
(pointed)
1 Yoke HARMONIC DAMPER PULLEY PULLER
1 Tightening cap
PIECES CONTENTS
1 Plastic box
* Packaged in plastic case 4205 gm lb.
3 Forcing rods, sizes 1,500 3.31
5/16” x 4”, 5/16” x 5 7/16”
Extracts steering and 5/16” x 7 7/16”.
assembly pitman 1 3-jaw puller.
4051 arms. 1 Harmonic balancer holding
tool.
1 Forcing screw.
1 Plastic box.
4051
This tool set
PITMAN ARM PULLER FOR SMALL VEHICLES removes broken
DESCRIPTION USE CAPACITY spark plugs from
OPENING EXTRACTION 2004 and newer
in. mm in. mm gm lb. Triton 3 valve per
Light duty PITMAN Small 1 1/16 27 1 3/4 45 448 0.99 cylinder engines, (a UEXBT
arm puller vehicles common problem).
The set includes a unique
porcelain pusher tool and a
4052 tapered left-hand thread remover for
removing the broken spark plug without Set Includes a
PITMAN ARM PULLER FOR LARGE VEHICLES AND TRUCKS leaving the porcelain in the engine cylinder. Unique Porcelain
DESCRIPTION USE CAPACITY Pusher Tool.
OPENING
in. mm
EXTRACTION
in. mm gm lb.
Porcelain pusher is
used to press the
UEXBT 6-PIECE KIT
Heavy duty PITMAN Large 1 5/16 33 2 1/2 64 950 2.09 porcelain piece, BROKEN PLUG REMOVER FOR FORD 3 VALVE
arm puller vehicles without breaking the
porcelain, farther PIECES CONTENTS
548
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
PULLERS GEAR/BEARING
SEPARATORS
AUTOMOTIVE SCREW
EXTRACTORS
WORKBENCH
VISES
PREC. VISES
& C-CLAMPS
PULLERS
1/2"
PIECES CONTENTS
Kg Lb
3 Hubcap locking lug nut removers. 2.2 4.850
1 Hubcap locking lug nut remover.
2 Chrysler, Ford and GM lug lock removers.
2 7/8" and 3/8" removers for large and damaged
lug locks.
1 Large after-market locking lug nut remover.
1 GM wheel locking lug nut remover
74HLR 1 Extractor punch.
1 18 mm smooth nut remover.
1 3" Extension.
1 Plastic box
PULLERS, VISES
&
C-CLAMPS
End with hex
opening
End with twist
opening
• For use on the most commercial lug nuts.
• The drive is located in the middle of the socket.
• Includes standard punch.
• Removes the most common hex nuts.
• 6-flute design fits perfectly on hex nuts.
13
3/8"
in. mm gm lb.
3/8 9.5 9/16, 15 mm, 5/8-16 mm, 17 mm, 1,100 2.43
11/16, 3/4-19 mm, 3/8, 10 mm,
7/6-11 mm, 12 mm, 13 mm, 14 mm
Extractor punch
Plastic box
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
PULLERS GEAR/BEARING
SEPARATORS
AUTOMOTIVE
PULLERS
SCREW WORKBENCH
VISES
PREC. VISES
& C-CLAMPS
EXTRACTORS
7400SWL
7400SVW
9500B
9500A
Spiral flute 1/8” to 3/4” screw extractors Straight flute 1/8” to 3/8” pipe extractors
Vinyl pouch Vinyl pouch
ASME / ANSI B107.46M ASME / ANSI B107.46M
9521 95001
CODE PIPE TIP BUTT END LENGTH CODE DESCRIPTION HOLE SCREW/NUT LENGTH
DIAMETER WIDTH WIDTH SIZE SIZE
in. mm in. mm in. mm in. mm gm lb. in. mm in. mm in. mm gm lb.
9521 1/8 3.1 1/8 3.1 3/16 4.7 2 5/16 47.0 9.0 0.02 95001 1/8” to 1/4” 5/64 2.0 1/8-1/4 3.2-6.3 1 27/32 47.0 2 0.00
9522 1/8 3.1 11/64 4.3 3/16 4.7 2 5/8 57.0 9.0 0.02 95002 1/4” to 5/16” 7/64 2.8 1/4-5/16 6.3-7.9 2 1/4 57.0 6 0.01
9523 1/8 3.1 13/64 5.1 1/4” 6.3 2 7/8 64.0 18.1 0.04 95003 5/16” to 7/16” 5/32 4.0 5/16-7/16 7.9-11.1 2 1/2 64.0 12 0.03
9524 1/4 6.3 19/64 7.5 5/16 7.9 3 73.0 31.7 0.07 95004 7/16” to 9/16” 7/32 5.6 7/16-9/16 11.1-14.3 2 7/8 73.0 22 0.05
9525 3/8 9.5 11/32 8.7 3/8 9.5 3 1/4 81.0 49.8 0.11 95005 9/16” to 3/4” 17/64 6.8 9/16-3/4 14.3-19.0 3 3/16 81.0 47 0.10
ASME / ANSI B107.46M ASME / ANSI B107.46M
550
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
PULLERS GEAR/BEARING
SEPARATORS
AUTOMOTIVE
PULLERS
SCREW
EXTRACTORS
WORKBENCH PREC. VISES
& C-CLAMPS
VISES
WORKBENCH VISES
Robust and reinforced, they are ideal for heavy-duty work. The jaws are made of tempered steel and the U-shaped guide is made of steel,
providing greater resistance while protecting the screw and bronze nut. The dismountable jaws hold circular pieces better. The base swivels
360 degrees.
PULLERS, VISES
&
C-CLAMPS
A
L
13
C
SE
EL BA
B SWIV
WORKBENCH VISES
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Precision vises are casted of high-tension, close-grained cast steel. They have a
scratch- and rust-proof gray polychromatic finish.
Bottom groove
PRECISION MILLING VISES guide on the base
2 AXES for precision
installation on
CODE JAW JAW JAW BOTTOM THREAD workbench.
WIDTH OPENING DEPTH GROOVE
552
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
C-CLAMPS
Heavy-duty c-clamps are forged in high-quality alloy steel. Their highly engineered proportions perform better on resistance tests. Screws
with ACME rolling threads provide more strength and smooth operation. These heavy-duty c-clamps allow greater precision, better
performance and high efficiency.
Design provides greater reach and throat depth.
They feature a
large diameter
screw, a
comfortable
sliding T-handle
and ACME thread
that makes turning
easy.
Deeper throats
Reinforced 412
corners.
412PRO
PULLERS, VISES
&
These deep-throated forged body c-clamps are
C-CLAMPS
ideal for safely fastening pieces so you can work
HEAVY-DUTY on them. Mainly used for welding and soldering, in
FORGED C-CLAMPS workshops or for industrial purposes.
CODE CAPACITY SCREW SCREW THROAT MAXIMUM
LENGTH DIAMETER DEPTH CAPACITY
A B C D
A B
C
D
13
406PRO 0-6 0 - 152.4 7 13/16 198.4 7/8 22.2 2 3/4 69.8 10,771 2,850 7,63
408PRO 0-8 0 - 203.2 9 15/32 240.5 1 25.4 3 3/4 96 11,209 4,400 11,79
410PRO 0 - 10 0 - 254.0 12 63/64 329.8 1 25.4 4 7/8 124 11,411 6,100 16,34
412PRO 0 - 12 0 - 304.8 14 11/64 360 1 1/8 28.5 5 1/8 130 16,559 8,900 23,84
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329