Professional Documents
Culture Documents
Configuration
Introduction
Below picture will clearly illustrates the scenario of the deployment.
Logical switch creation
Now as the VTEP’s are configured and VXLAN is working based on our previous post. Will
create logical switches and DLR for logical switches gateway.
Navigate to vCenter web – Network and security – Logical switches – Click on + sign to add
a new logical switch as shown below.
Provide the Name of the Logical switch and select the replication mode.
Web-LS
Similarly create 4 more logical switches as shown below.
Web-LS
App-LS
DB-LS
Transit-LS
HA-LS
Note: we no need to deploy control VM is static routes are in use. Control VM is required
only if dynamic routing like OSPF and BGP is required.
If you want to use static routed between DLR and edge no need to deploy Edge appliance.
provide user name and password for edge appliance login , enable SSH
Next step Click on + Sign , select the resource pool information to deploy control VM ( edge
appliance)
Review and next
Now we need to configure interfaces
Click on + sign under configure interfaces – Provide Name for uplink and connect to tranit-
LS – provide IP for this interface as shown below and netmask.
Note: this transit interface will be connected on the other end with Edge appliance in next
post. we are using IP 192.168.8.2 for this interface.
Similarly create 3 mote internal interfaces for web, app and DB. This will act as gateway for
all the VM’s connected to that LS.