Perfect glue book binding machine
Bervicing book1, Power switch
2, Manual/Auto switch
3. Milling cutter choosing switch-cutting/not
cutting(enclose light)
4. Clamp choosing switch---clamping/not
clamping(enclose light)
5. Clamp pressure adjusting knob
6, Clamp time adjusting knob
7, Emergency stop key
8, Warming key(enclose light)
9. Thermostat light
10. Start-up key(enclos:
44. Lay. k Jamping/loosening ke(2)
6)
(6)
Milling cutter choosing switch: if the books have been binded or been
binging the sring, do not use milling cutter when pasting; other time using
milling cutter.Because milling can increase fastnes
ed, use clamping:
Clamp choosing switch: When books need be cov
when it not covered, not use clamping,
Clamp pressure adjusting knobs a transformer, which control the
voltage of the clamp electromotor.Limit: during 60-100, according as the
thickness of the cover and the thickness of the inner page.The thicker of
the cover, the bigger of the pressure; the thicker of the inner page,the
smaller of the pressure
Clamp time adjusting knob:The function is to make sure the themal glue
Of the books concrete and keep the shape when taken out.Woking time:
3secs-10secs
Warming key:The woking temperature of the glue groove is 180 degrees
centigrade+5 degrees centigrade
Press the key when the yellowlamp lighting, reduce the temperature
to150degrees centigrade+S5degrees centigrade, the machine can not be
operated.The reason is glue groove have themal giue, the glue won't
9 machine a
8 minut
deteroprate with the high tem
ess the warm key(light is out), only after t
epi
the machine can b