Project3 SEAR (EVA BIBRA AY A BR CES ST
THAN A 3-1 ia, ROCHE: sphere.
ZAK: 1.008 Pa
RI=0.
R2=0.5
FL 3-1 SRP A RH SLA BEL CARTS)
3.1 ILA ANSYS
48)F +ANSYSED 6.1 —Interactive --change the working directory into yours >
‘npot Initial jobname: sphereRun
3.2 RET HAD
ANSYS Main Menu: Preferences... —rselect Structural > OK
33K
ANSYS Main Menu: Preprocessor Element Type-Add/Edit/Delete Add —select
Solid Quad 4node 42 OK (back to Element Types window) ~ Options... select K3:
Axisymmetric -OK— Close (the Element Type window)
3452 HSH
ANSYS Main Menu: Preprocessor ->Material Props —-Material Models -+Structural >
Linear Elastic Isotropic input EX:2.Iel1, PRX¥:0.3 > OK
3.5 BL ODA
eR A
ANSYS Main Menu: Preprocessor Modeling —Create ~Keypoints ~In Active CS
He MAINE: imputl(0.3.0),2(0:5,.0)3(0.0:5)4(0.0.3) OK
ewok A
ANSYS i 38ifHE: Work Plane>Change Active CS to>Global Spherical ->ANSYS
Main Menu: Preprocessor Modeling --Create Lines In Active Coord — fk ici
1,234 Si-OK —Preprocessor Modeling —Create ~Areas —Arbitrary By Lines
-HEURURIVEAU-OK --ANSYS. fy $58 IUEE: Work Plane>Change Active CS to>Global
>Cartesian
3.6 FARR
ANSYS Main Menu: Preprocessor Meshing Mesh ‘Tool (Size Controls) lines: Set
FL PUACELUZOK—input NDIV: 10 ~Apply> #44244 1s0K input NDIV: 20 >
OK —(back to the mesh tool window)Mesh: Areas, Shape: Quad, Mapped Mesh Pick All
(in Picking Menu) Close( the Mesh Tool window)
3.7 BALMER
¥ Gok PR
ANSYS Main Menu: Solution -*Define Loads --Apply —Structural —-Displacement
On Lines ~42UKFi: Lab2: UY + OK,
Y Seni
ANSYS Main Menu: Solution Define Loads --Apply —Structural -~Displacement
Symmetry B.C. --On Lines --#25UEHIU OK
Sees SI I 3 A
ANSYS Main Menu: Solution ~Define Loads Apply -rStructural --Pressure >
On Lines 1834/3; OK —input VALUE:100e6 OK
38 HTH
ANSYS Main Menu: Solution Solve Current LS —~OK(to close the solve Current
Load Step window) OK
3.9 BURGLAR
ANSYS Main Menu: General Postproc Plot Results ~Deformed Shape... ~ select
Def + Undeformed OK (back to Plot Results window) Contour Plot Nodal Solu... ~
4: DOF solution, UX,UY, Def + Undeformed , Stress SX,SY,S7,Def + Undeformed--OK
3.10 SB RH
ANSYS Utility Menu: File~ Exit... Save Everything~OK