oy
Symons Cone Crusher
Instruction ManuelFOREWORD
‘This book is an Instruction Manual for the new operator and a refresher for the experienced one.
Read — study — and keep it handy.
Illustrations and instructions guide the operator through correct procedures for checking, starting
and operating the Crusher and accessories.
Operating techniques outlined in the book are basic. Operating skills and additional techniques will
develop as the operator gains knowledge of the Crusher and its capabilities.
Continuing improvement and advancement of product design may result in changes to your new
machine which may not be included in this publication, however each publication is reviewed and
revised, as required, to up-date and include appropriate changes in the later editions.
‘The description and specifications in this manual were in effect at the time this manual was
approved for printing. Nordberg reserves the right to discontinue models at any time, and to change
specifications or design, without notice and without incurring obligation.
Whenever a question arises regarding your Crusher, or this publication, please consult your
Nordberg representative for the latest available information.
AFE
BASIC RULES REGARDING SAFETY IN AND AROUND A CRUSHING
PLANT ARE OUTLINED IN SECTION 0, ENTITLED “SAFETY.”
OPERATOR SAFETY AND THE SAFETY OF OTHERS DEPENDS UPON
REASONABLE CARE AND JUDGEMENT IN THE OPERATION OF THIS
CRUSHER. A CAREFUL OPERATOR IS GOOD INSURANCE AGAINST
AN ACCIDENT.
MOST ACCIDENTS, NO MATTER WHERE THEY OCCUR, ARE CAUSED
BY FAILURE TO OBSERVE AND FOLLOW SIMPLE FUNDAMENTAL
RULES OR PRECAUTIONS. FOR THIS REASON MOST ACCIDENTS
CAN BE PREVENTED BY RECOGNIZING HAZARDS AND TAKING
STEPS TO AVOID THEM BEFORE AN ACCIDENT OCCURS.
REGARDLESS OF THE CARE USED IN THE DESIGN AND CONSTRUC-
TION OF THIS TYPE OF EQUIPMENT, THERE ARE CONDITIONS
THAT CANNOT BE COMPLETELY SAFEGUARDED AGAINST WITHOUT
INTERFERING WITH REASONABLE ACCESSIBILITY AND EFFICIENT.
OPERATION. WARNINGS ARE INCLUDED IN THIS INSTRUCTION
MANUAL TO HIGHLIGHT THESE CONDITIONS.
19th PRINTING 1990TABLE OF CONTENTS
SAFETY .. seootogs nu uoeoosocsocoG . SECTION
GENERAL CRUSHER INFORMATION SECTION
GENERAL INSTALLATION INFORMATION . SECTION
MAIN FRAME, ADJUSTMENT RING AND SPRING RING ASSEMBLIES .. SECTION
COUNTERSHAFT BOX, COUNTERSHAFT AND SHEAVE ASSEMBLIES ... SECTION
THRUST BEARING AND ECCENTRIC ASSEMBLIES SECTION
SOCKET ASSEMBLY .......... eee tr SECTION
MAIN SHAFT, MANTLE AND FEED DISTRIBUTOR ASSEMBLIES ......... SECTION
BOWL, BOWL LINER AND ADJUSTMENT CAP ASSEMBLIES .............. SECTION
FEED PLATFORM ASSEMBLY SECTION
LUBRICATING SYSTEM ....... SECTION
OPERATING INSTRUCTIONS ...... . SECTION
HYDRAULIC CLAMPING AND ADJUSTMENT MECHANISMS sess SECTION
HYDRAULIC CLEARING SYSTEM SECTION
10
u
12
18