Professional Documents
Culture Documents
Gaskets PDF
Gaskets PDF
APPLICATIONS
• HEAT EXCHANGERS
• PRESSURE VESSELS
• MANHOLE COVERS
• HANDHOLE
• VALVE BONNETS
• PIPE FLANGES
MC and MCR Gaskets
Oval
Spiral Winding
(Sealing Element)
WARNING: Performance data published in this brochure has been developed from field
Properties/applications shown throughout this brochure are typical. Your specific testing, customer field reports and/or in-house testing.
applica-tion should not be undertaken without independent study and evaluation for While the utmost care has been used in compiling this brochure, we assume no
suitability. For specific application recommendations consult factory. Failure to select respon-sibility for errors. Specifications subject to change without notice. This edition
the proper sealing products could result in property damage and/or serious personal cancels all previous issues. Subject to change without notice.
injury.
HH Gaskets
Oval Pear
Ordering Information
When ordering, specify:
■ Make and model of boiler and/or equipment, if
available
■ Gasket style and configuration
■ Dimensions of gasket (thickness, flange seating
width, and shape)
WARNING: ■ Maximum operating pressure and temperature
Properties/applications shown throughout this brochure are typical. Your specific applica-
tion should not be undertaken without independent study and evaluation for suitability. ■ Type of metal and filler materials
For specific application recommendations consult factory. Failure to select the proper
sealing products could result in property damage and/or serious personal injury.
Performance data published in this brochure has been developed from field testing,
customer field reports and/or in-house testing.
While the utmost care has been used in compiling this brochure, we assume no respon-
sibility for errors. Specifications subject to change without notice. This edition cancels
all previous issues. Subject to change without notice.
! D-10
Corrugated Metal
Gasket
Construction
Applications Compressible Sealing
■ Valves ■ Heat exchangers Element
■ Pumps ■ Vessels
■ Flanges
! D-17
CAMMPROFILE GASKET
Benefits Applications
■ Accommodates standard ASME flanges as well ■ Valves
as weaker and non-circular flanges ■ Pumps
■ Seals less-than-perfect flanges
■ Handles pressures from vacuum to Class 2500 ■ Flanges
■ Performance replacement for jacketed heat ■ Heat exchangers
ex- changer gaskets ■ Vessels
■ Fire safe—passed API 6FB fire tests
■ Available in heat shield configuration for high
temp applications above 850ºF (454ºC) (see
page D-6)
Male/Female
Raised Face
WARNING:
Gasket Gasket Properties/applications shown throughout this brochure are typical. Your specific applica-
tion should not be undertaken without independent study and evaluation for suitability.
Gasket Style Factor Factor For specific application recommendations consult factory. Failure to select the proper
"M" "Y" (psi) sealing products could result in property damage and/or serious personal injury.
Performance data published in this brochure has been developed from field testing,
Cammprofile gasket 4.00 1,000* customer field reports and/or in-house testing.
While the utmost care has been used in compiling this brochure, we assume no respon-
Note: When designing a flange, a "Y" value of sibility for errors. Specifications subject to change without notice. This edition cancels
4,000 psi is suggested. all previous issues. Subject to change without notice.
JACKETED GASKET STYLES
METALS:
STAINLESS STEEL
Single J acket COPPER
The most basic form of jacketed gasket, with SOFT IRON
coverage on one face and both edges. BRASS
MONEL!
INCONEL!
Single J acket w ith Overlap (OTHER MATERIALS ON REQUEST)
Where full coverage is needed and flange is
narrow relative to gasket ID.
Flat Solid
Cut from sheet metal, these gaskets can be of
unlimited size and shape. Mating surfaces need
to be perfectly aligned and flat for metal
gaskets to provide good seals.
Profiled and Serrated
A solid gasket with surface grooves facilitating
a good seal with lower seating stresses. These
styles can be jacketed to protect the flange
surfaces.
Corrugated
Made from thin metal, these gaskets provide a
seal at low seating stress. They may be surface-
treated with ceramic, non-asbestos or flexible
graphite, or they may be used with a PTFE
envelope.
7635 RONSON ROAD • SAN DIEGO, CALIFORNIA 92111 • TEL: 858-278-3270 • FAX: 858-278-2950
E-MAIL: sales@sandiegoseal.com • VISIT US AT: www.sandiegoseal.com