You are on page 1of 156

11-84 ENGINE<6G74>-Timing Belt

9. Timing belt upper cover


10. Crankshaft position sensor connector
10a! Crankshaft pulley bolt – Заменяйте его на новый при каждом снятии!!! (Информационное
письмо ИР-01-003Т)
11. Crankshaft pulley
12. Timing belt lower cover
• Adjustment of timing belt tension
13. Timing belt
14. Auto tensioner
15. Tension pulley
16. Tension arm assembly

SERVICE POINTS OF REMOVAL


3. REMOVAL OF COMPRESSOR <A/C>/6. OIL
PUMP (POWER STEERING)
Remove the oil pump and air conditioning compressor
(with the hose attached)
NOTE
Suspend the removed oil pump (by using wire or similar
material) at a place where no damage will be caused
during removal/installation of the engine assembly.

Mitsubishi Motors Corporation Dec. 1993 PWJE9086-E ADDED

You might also like