Professional Documents
Culture Documents
Throughput
(points/min)
Repeatability (µin)
Y-axis (inches)
Z-axis (inches)
Analog
Switching
Laser
Contact
Vision System
Manual
D.C.C.
Manual Input
Part Sensor
Machine Sensor
Resolution (µin)
X-axis (µin)
X-axis (inches)
Y-axis (µin)
Z-axis (µin)
VDI/VD
B89
Temp. Range (˚F)
Company/Product
Machine Type
Guide Method
6-axis=6X (µin)
A.A. Jansson Inc.
Ph. 248-674-4811 Fax 248-674-1234 Also distributes Faro, International Metrology Systems, Laser Design, Quality Control Solutions and used CMMs
The Inspector 10150 Horiz. Arm Call 60 40 400 • 2,000 2,000 3X=5,000 Mechanical • •
The Inspector 12150 Horiz. Arm Call 48 60 400 2,000 2,000 3X=5,000 Mechanical • •
The Inspector 15150 Horiz. Arm Call 60 60 400 • 2,000 2,000 3X=5,000 Mechanical • •
The Inspector 18150 Horiz. Arm Call 60 72 400 2,000 2,000 3X=5,000 Mechanical • •
The Inspector 20150 Horiz. Arm Call 60 80 400 • 2,000 2,000 3X=5,000 Mechanical • •
The Inspector 25150 Horiz. Arm Call 60 100 400 • 2,000 2,000 3X=5,000 Mechanical • •
The Inspector 30150 Horiz. Arm Call 60 120 400 • 2,000 2,000 3X=5,000 Mechanical • •
Acu-Gage Systems
Ph. 603-622-2481 Fax 603-626-1277
High Precision Line Fixed Bridge 8-24 8-24 4-12 20 200 200 200 68 ± 4 60 Mechanical • •
Linear Motor Drive Series Gantry 48 48-96 4-12 40 500 500 500 65-85 300 Mechanical • • •
MMR Gantry 12-36 12-48 4-12 40 300 300 300 65-85 300 Mechanical • • • •
Single Axis Gantry 12-120 40 300 65-85 300 Mechanical • •
American SIP Corp.
Ph. 914-592-8006 Fax 914-592-2383
CAPS4 Horiz. Arm 20 20 16 4 • 60-86 3X=3 + L/0.8 µm 6,000 • •
CAPS5 Horiz. Arm 28 28 24 4 • 60-86 3X=3 + L/0.8 µm 6,000 • •
Orion 6 Fixed Bridge 47 28 22 4 • 20 + L/1.2 µm 60-86 3X=32 + L/0.8 µm 8 µm 6,000 Hydrostatic • • • •
Sirius 7 Fixed Bridge 39 34 32 4 • 56 + L/0.6 µm 60-86 3X=68 + L/0.4 µm 6,000 Hydrostatic • • • •
Sirius 7HA Bridge-Vert. 39 39 32 4 • 20 + L/1.2 µm 60-86 3X=32 + L/0.8 µm 8 µm 6,000 Hydrostatic •
Sirius 8 Fixed Bridge 39 60 32 4 • 56 + L/0.6 µm 60-86 3X=68 + L/0.4 µm 6,000 Hydrostatic • • • •
Sirius 8HA Bridge-Vert. 39 60 32 4 20 + L/1.2 µm 60-86 3X=32 + L/0.8 µm 8 µm 6,000 Hydrostatic •
Bobier Tool Supply Inc.
Ph. 810-732-4030 Fax 810-732-3909
PAG Meas. Robot 36 24 24 1 • 4 + L/6 65–95 4X=6 + L/6 2 60 Air • • •
TRIMEK Horiz. Arm no limit 157 157 • 50 + L/100 60–80 80 + L/100 400 60 Mechanical • • • •
Brown & Sharpe
Ph. 401-886-2000 Fax 401-886-2727
Beta SP Gantry 101-203 60-101 40-60 40 • 3X=280 + 80L—800 + 200L
68 ± 1.8 Air • • •
Beta SPM Gantry 101-132 60-81 40-60 40 • 3X=280 + 80L—640 + 150L
68 ± 1.8 • • •
Bravo Horiz. Arm 73-332 26-118 38-130 40 • 3X=600 + 150L—2,000 + 450L
68 ± 9 • • •
Chameleon Bridge-Vert. 30-35 26-59 20-34 10 • 200 200 200 64-72
3X=3,500 110 45-60 Air • • • • • • • •
CYGNUS X Fixed Bridge 40-55 32-48 24-40 4 • 48 + L/0.4 3X=72 + L/0.3 50 Air • • • • • •
Delta SP Gantry 132-254 81-101 60-73 40 • 68 ± 1.8 3X=200 + 60L—360 + 100L Air • • •
FDG 1000 Bridge-Vert. 27-28 19-26 12-18 • 3X=200 140 60 Air • • • •
FDG 2000 Bridge-Vert. 40-56 26-34 18-26 • 3X=200 140 60 Air • • • •
Gage 2000 Bridge-Vert. 18 20 16 • 200 200 200 68 ± 1.8 3X=400 160 Air • • • •
Gage 2000A Artic. Arm 48-144 Dia. Sphere 1,000-4,700 Hard Ball •
Gage 2000H Bridge-Vert. 30 20 30 • 59-104 3X=980 Air • •
Ghibli Series Bridge-Vert. 80-104 60 54 • 3X=300 40 60 Air • • •
51
Dimensions are in inches or microinches unless otherwise shown
52
Range Linear Accuracy Volumetric Accuracy Probe Type Control T˚ Comp.
Accord.
To
CMM Guide 3-axis=3X (µin)
4-axis=4X (µin)
Throughput
(points/min)
Repeatability (µin)
Y-axis (inches)
Z-axis (inches)
Analog
Switching
Laser
Contact
Vision System
Manual
D.C.C.
Manual Input
Part Sensor
Machine Sensor
Resolution (µin)
X-axis (µin)
X-axis (inches)
Y-axis (µin)
Z-axis (µin)
VDI/VD
B89
Temp. Range (˚F)
Company/Product
Machine Type
Guide Method
6-axis=6X (µin)
Lambda Gantry 130-640 130-254 101-162 40 • 68 ± 1.8 3X=400 + 140L–640 + 250L Air • • •
Micro PCR Meas. Robot 9 8 15 • 68 ± 1.8 4X=400 40 60 Air • • • • •
MicroXcel Bridge-Vert. 30 26 20 4 • 200 200 200 68 ± 1.8 3X=400 160 Air • • • • •
MicroXcel PFx Bridge-Vert. 30 26 20 40 • 200 200 200 68 ± 1.8 3X=400 120 45-60 Air • • • • • • •
Throughput
(points/min)
Repeatability (µin)
Y-axis (inches)
Z-axis (inches)
Analog
Switching
Laser
Contact
Vision System
Manual
D.C.C.
Manual Input
Part Sensor
Machine Sensor
Resolution (µin)
X-axis (µin)
X-axis (inches)
Y-axis (µin)
Z-axis (µin)
VDI/VD
B89
Temp. Range (˚F)
Company/Product
Machine Type
Guide Method
6-axis=6X (µin)
Talon ELM-408040 Bridge 40 80 40 20 • 300 500 250 68±4 3X=600 100 60 Air • • • • • • • •
Talon ELM-484824 Bridge 48 48 24 20 • 300 300 200 68±4 3X=500 100 60 Air • • • • • • • •
Talon ELM-486024 Bridge 48 60 24 20 • 300 500 250 68±4 3X=700 100 60 Air • • • • • • • •
Talon ELM-489640 Bridge 48 96 40 20 • 300 600 250 68±4 3X=750 100 60 Air • • • • • • • •
Talon ELM-606040 Bridge 60 60 40 20 • 300 500 250 68±4 3X=700 100 60 Air • • • • • • • •
Talon ELM-6010040 Bridge 60 100 40 20 • 400 700 250 68±4 3X=750 100 60 Air • • • • • • • •
Titan LCMM Horiz. Arm 24-720 24-96 24-108 40 500 500 500 68±1.8 100 Mechanical • • • • •
FARO Technologies Inc.
Ph. 800-736-0234 Fax 407-333-4181
FaroArm Gold Series Artic. Arm 48-144 Dia. Sphere 100 • 1,000–6,600 32-113 6X=1,000 1,000 5,400 • • • • • •
Giddings & Lewis—Sheffield Measurement
Ph. 920-921-7100 Fax 920-906-7669
Cordax Discovery D-8 Gantry 20 24 16 40 • 200 200 180 40-104 3X=510 100 60 Recirc. Ball • • • • •
Cordax Discovery D-12 Gantry 20 36 16 40 • 280 280 180 40-104 3X=510 100 60 Recirc. Ball • • • • •
Cordax Discovery D-28 Gantry 30 40 24 40 • 240 300 200 40-104 3X=510 100 60 Recirc. Ball • • • • •
Endeavor 9.9.7 Ring Bridge 36 36 26 4 • 120 120 100 3X=320 100 60-100 Porous Graphite • • • • • • •
Endeavor 9.12.7 Ring Bridge 36 48 26 4 • 120 160 100 3X=340 100 60-100 Porous Graphite • • • • • • •
Endeavor 9.15.7 Ring Bridge 36 60 26 4 • 120 200 100 3X=360 100 60-100 Porous Graphite • • • • • • •
Endeavor 9.12.10 Ring Bridge 36 48 40 4 • 160 160 140 3X=400 100 60-100 Porous Graphite • • • • • • •
Endeavor 9.15.10 Ring Bridge 36 60 40 4 • 160 200 140 3X=420 100 60-100 Porous Graphite • • • • • • •
Endeavor 12.15.10 Ring Bridge 48 60 40 4 • 180 200 140 3X=480 100 60-100 Porous Graphite • • • • • • •
Endeavor 12.20.10 Ring Bridge 48 80 40 4 • 180 220 140 3X=520 100 60-100 Porous Graphite • • • • • • •
Endeavor 12.25.10 Ring Bridge 48 100 40 4 • 180 240 140 3X=560 100 60-100 Porous Graphite • • • • • • •
Endeavor 12.30.10 Ring Bridge 48 120 40 4 • 200 280 160 3X=600 100 60-100 Porous Graphite • • • • • • •
Helmel Engineering Products Inc.
Ph. 716-297-8644 Fax 716-297-9405
Checkmaster Model 112-102 Bridge-Vert. 12 12 10 20 • 180 + 6µ"/in 68±2 3X=360 160 Mechanical • • • • •
Checkmaster Model 216-142 Bridge-Vert. 16 20 14 20 • 180 + 6µ"/in 68±2 3X=380 120 Mechanical • • • • •
Microstar L Model 1260-401 DCC Bridge-Vert. 60 120 40 40 • 200 + 9–10µ"/in 68±2 3X=1,100 200 Mechanical • • • • • •
Microstar L Model 845-401 DCC Bridge-Vert. 45 80 40 40 • 200 + 9µ"/in 68±2 3X=900 200 Mechanical • • • • • •
Microstar Model 220-162 Bridge-Vert. 20 20 16 20 • 180 + 6µ"/in. 68±2 3X=440 160 Mechanical • • • • • •
Microstar Model 320-162 Bridge-Vert. 20 30 16 20 • 180 + 6µ"/in. 68±2 3X=440 160 Mechanical • • • • • •
Microstar Model 430-202 Bridge-Vert. 30 40 20-25 20 • 200 + 8µ"/in 68±2 3X=700 160 Mechanical • • • • • • •
Microstar Model 640-252 Bridge-Vert. 40 60 20-25 20 • 250 + 10µ"/in 68±2 3X=800 200 Mechanical • • • • • • •
Microstar Model 850-252 Bridge-Vert. 50 80 25 20 • 250 + 10µ"/in 68±2 3X=800 200 Mechanical • • • • • • •
PcMM Bridge-Vert. 20 16 16 40 • 180 + 6µ"/in 68±2 3X=400 150 Mechanical • • • • •
PcMM Plus Bridge-Vert. 20 30 16 40 • 180 + 7µ"/in 68±2 3X=450 150 Mechanical • • • • •
International Metrology Systems Inc.
Ph. 734-591-3800 Fax 734-591-3850
Impact Bridge-Vert. 20 24 18 20 • • 68±2 3X=2.5 + L/300 100 480 Air • • • • • • • •
Impact II Bridge-Vert. 30 30 22 20 • • 68±2 3X=30 + L/300 100 480 Air • • • • • • • • •
IMPEL Horiz. Arm 40-240 30-80 40-100 20 68±2 3X=23 + 22L/1,000 200 480 Air/Mechanical • • • • • • • • •
53
Dimensions are in inches or microinches unless otherwise shown
54
Range Linear Accuracy Volumetric Accuracy Probe Type Control T˚ Comp.
Accord.
To
CMM Guide 3-axis=3X (µin)
4-axis=4X (µin)
Throughput
(points/min)
Repeatability (µin)
Y-axis (inches)
Z-axis (inches)
Analog
Switching
Laser
Contact
Vision System
Manual
D.C.C.
Manual Input
Part Sensor
Machine Sensor
Resolution (µin)
X-axis (µin)
X-axis (inches)
Y-axis (µin)
Z-axis (µin)
VDI/VD
B89
Temp. Range (˚F)
Company/Product
Machine Type
Guide Method
6-axis=6X (µin)
Merlin 1400 Series Bridge-Vert. 55 60-120 30-50 20 • • 68±2 3X=5 + L/300 100 480 Air • • • • • • • • •
Merlin 1600 Series Bridge-Vert. 63 88-120 40-50 20 • • 68±2 3X=6 + L/300 140 480 Air • • • • • • • • •
Merlin XL Series Gantry 60-200 120-375 44-80 68±2 3X=10 + 5L/1,000 200 480 Air • • • • • • • •
Umpire Bridge-Vert. 14 14 12 20 • • 68±2 3X=3 + L/250 100 480 Linear Guides • • • • • • • • •
Throughput
(points/min)
Repeatability (µin)
Y-axis (inches)
Z-axis (inches)
Analog
Switching
Laser
Contact
Vision System
Manual
D.C.C.
Manual Input
Part Sensor
Machine Sensor
Resolution (µin)
X-axis (µin)
X-axis (inches)
Y-axis (µin)
Z-axis (µin)
VDI/VD
B89
Temp. Range (˚F)
Company/Product
Machine Type
Guide Method
6-axis=6X (µin)
Mahr Federal Inc.—Multisensor Division
Ph. 800-969-1331 Fax 513-489-2020
C-400 Fixed Bridge 18 12 8 4 • 1.5 + L/300 µm 62-74 3X=2.5 + L/200 µm <40 60+ Air • • • • • •
MPC-Series (Dual Z Axis) Bridge-Vert. 20-47 20-39 12-14 4 • 0.6 + L/700 µm 62-74 3X=1.6 + L/500 µm <40 60+ Air • • • • • •
MS-Series Fixed Bridge 10-18 8 8 20 • 1.9 + L/200 µm 64-72 3X=2.9 + L/100 µm <40 60+ Mechanical • • • • • •
OMS-Series Bridge-Vert. 16-53 16-39 10-23 4 • 0.9 + L/600 µm 62-74 3X=1.9 + L/400 µm <40 60+ Air • • • • • •
OMS-802 (Dual Z Axis) Bridge-Vert. 32 32 14/14 4 • 0.6 + L/700 µm 64-74 3X=1.6 + L/500 µm <40 60+ Air • • • • • •
PMC 500 Bridge-Vert. 20 24 16 20 • 64-72 3X=3.5 + L/300 µm <40 60+ Air • • • •
PMC 650 and PMC 800 Bridge-Vert. 26-31 47-59 20-28 20 • 64-72 3X=3 + L/350 µm <40 60+ Air • • • •
MetricVision
Ph. 703-550-2945 Fax 703-550-2949
MetricVision MV200 Meas. Robot range, elev., azmth.= 60 m 50 µm • 40-105 3X=65µm @ 10m 250 Noncontact • • • • •
Mitutoyo America Corp.
Ph. 630-820-9666 Fax 630-820-7403
Bright Apex 504 Bridge-Vert. 20 16 16 20 µm ISO (2.9 + 4L/1,000) µm 61–79 3X=(2.9 + 4L/1,000) µm 60 Air • • • • • •
Bright Apex 707 Bridge-Vert. 28 28 24 20 µm ISO (2.9 + 4L/1,000) µm 61–79 3X=(2.9 + 4L/1,000) µm 60 Air • • • • • •
Bright Apex 710 Bridge-Vert. 28 40 24 20 µm ISO (2.9 + 4L/1,000) µm 61–79 3X=(2.9 + 4 L/1,000) µm 60 Air • • • • • •
Bright Apex 910 Bridge-Vert. 36 40 24 20 µm ISO (3.9 + 4L/1,000) µm 61-79 3X=(3.9 + 4L/1,000) µm 60 Air • • • • • •
Bright Apex 916 Bridge-Vert. 36 64 24 20 µm ISO (3.9 + 4L/1,000) µm 61-79 3X=(3.9 + 4L/1,000) µm 60 Air • • • • • •
Bright Apex 1212 Bridge-Vert. 48 48 40 20 µm ISO (4.9 + 5L/1,000) µm 61-79 3X=(4.9 + 5L/1,000) µm 60 Air • • • • • •
Bright Apex 1220 Bridge-Vert. 48 80 40 20 µm ISO (4.9 + 5L/1,000) µm 61-79 3X=(4.9 + 5L/1,000) µm 60 Air • • • • • •
Bright Apex 1230 Bridge-Vert. 48 120 40 20 µm ISO (4.9 + 5L/1,000) µm 61-79 3X=(4.9 + 5L/1,000) µm 60 Air • • • • • •
BRTM 507 Bridge-Vert. 20 28 16 20 µm • (3 + 4L/1,000) µm 66-70 3X=(4 + 5L/1,000) µm Air • •
BRTM 707 Bridge-Vert. 28 28 24 20 µm • (4 + 4L/1,000) µm 66-70 3X=(5 + 5L/1,000) µm Air • •
BRTM 710 Bridge-Vert. 28 40 24 20 µm • (4 + 4L/1,000) µm 66-70 3X=(5 + 5L/1,000) µm Air • •
BRT Strato 707 Bridge-Vert. 28 28 24 8 µm ISO (1.4 + 3L/1,000) µm 64-72 3X=(1.4 + 3L/1,000) µm 60 Air • • • • • •
BRT Strato 710 Bridge-Vert. 28 40 24 8 µm ISO (1.4 + 3L/1,000) µm 64-72 3X=(1.4 + 3L/1,000) µm 60 Air • • • • • •
BRT Strato 910 Bridge-Vert. 36 40 24 8 µm ISO (1.7 + 3L/1,000) µm 64-72 3X=(1.7 + 3L/1,000) µm 60 Air • • • • • •
BRT Strato 916 Bridge-Vert. 36 64 24 8 µm ISO (1.7 + 3L/1,000) µm 64-72 3X=(1.7 + 3L/1,000) µm 60 Air • • • • • •
LEGEX 707 Fixed Bridge 28 28 24 0.1 µm ISO (0.48 + L/1,000) µm 64-72 3X=(0.48 + L/1,000) µm 40 Air • • • • •
LEGEX 910 Fixed Bridge 36 40 24 0.1 µm ISO (0.48 + L/1,000) µm 64-72 3X=(0.48 + L/1,000) µm 40 Air • • • • •
MACH 403-04 Horiz. Arm 18 12 12 4 µm ISO (3.5 + 4.0L/1,000) µm 59-77 3X=(3.5 + 4.0/1,000) µm 80 • • • • •
MACH 806-10 Horiz. Arm 40 32 24 4 µm ISO (3.5 + 4.0L/1,000) µm 59-77 3X=(3.5 + 4.0/1,000) µm 80 • • • • •
Mora Precision Systems Inc.
Ph. 800-528-9785 Fax 810-759-2423
Mora Horizontal Arm Horiz. Arm 79-∞ 32-138 40-197 39 • quoted per machine quoted per machine 5 µm Roller • • • • • •
Mycrona Inc.
Ph. 734-453-5880 Fax 734-453-4076
Altera I & II Multi-Sensor Fixed Bridge 18-24 18-22 6-12 2 • 1.2 + L/400 µm 68±3.6 3X=1.2 + L/400 µm 0.1 µm 60+ Air • • • • •
Magnus MB Multi-Sensor Bridge-Vert. 80 40 33 20 • 3.0 + L/300 µm 68±3.6 3X=4.8 + L/200 µm 1.5 µm 60+ Air • • • • •
Magnus I & II Multi-Sensor Series Fixed Bridge 16-24 16-22 6-12 2 • 1.2 + L/400 µm 68±3.6 3X=1.2 + L/400 µm 0.1 µm 60+ Air • • • • •
Primus Multi-Sensor 300 Bridge-Vert. 12 6 6 4 • 2.3 + L/150 µm 68±3.6 3X=3.3 + L/100 µm 1 µm 60+ Needle Bearings • • • • •
55
Dimensions are in inches or microinches unless otherwise shown
56
Range Linear Accuracy Volumetric Accuracy Probe Type Control T˚ Comp.
Accord.
To
CMM Guide 3-axis=3X (µin)
4-axis=4X (µin)
Throughput
(points/min)
Repeatability (µin)
Y-axis (inches)
Z-axis (inches)
Analog
Switching
Laser
Contact
Vision System
Manual
D.C.C.
Manual Input
Part Sensor
Machine Sensor
Resolution (µin)
X-axis (µin)
X-axis (inches)
Y-axis (µin)
Z-axis (µin)
VDI/VD
B89
Temp. Range (˚F)
Company/Product
Machine Type
Guide Method
6-axis=6X (µin)
Signum H.A. Multi-Sensor 300 Fixed Bridge 12 12 6-12 2 • 1.2 + L/400 µm 68±3.6 3X=2.2 + L/300 µm 0.2 µm 60+ Air • • • • •
Signum Multi-Sensor 400 Bridge-Vert. 16 8 6-10 4 • 2.4 + L/400 µm 68±3.6 3X=3.4 + L/300 µm 0.5 µm 60+ Needle Bearings • • • • •
Signum H.A. Multi-Sensor 400 Fixed Bridge 16 8 6-12 2 • 1.2 + L/400 µm 68±3.6 3X=1.2 + L/400 µm 0.2 µm 60+ Air • • • • •
Nikon Inc.
Throughput
(points/min)
Repeatability (µin)
Y-axis (inches)
Z-axis (inches)
Analog
Switching
Laser
Contact
Vision System
Manual
D.C.C.
Manual Input
Part Sensor
Machine Sensor
Resolution (µin)
X-axis (µin)
X-axis (inches)
Y-axis (µin)
Z-axis (µin)
VDI/VD
B89
Temp. Range (˚F)
Company/Product
Machine Type
Guide Method
6-axis=6X (µin)
Aurora RGDC6440-24 Moving Bridge 40 64 24 20 • 300 400 200 68 ± 2 3X=600 100 90 Air • • • • • •
Premis HGC 2018-16 Moving Bridge 20 18 16 20 • 150 150 150 68 ± 2 3X=300 100 Air • • •
Premis HGC 2024-16 Moving Bridge 20 24 16 20 • 150 200 150 68 ± 2 3X=400 100 Air • • •
Premis HGC 3024-18 Bridge-Vert. 24 30 18 20 • 200 250 150 68 ± 2 3X=450 100 • • •
Premis HGDC 2018-16 Moving Bridge 20 18 16 20 • 200 200 200 68 ± 2 3X=300 100 90 Air • •
Premis HGDC 2024-16 Moving Bridge 20 24 16 20 • 200 200 200 68 ± 2 3X=300 100 90 Air • •
Premis HGDC 3024-18 Bridge-Vert. 24 30 18 20 • 200 250 150 68 ± 2 3X=450 100 • • •
Rapid Check 2 Gantry 24 24 18 • 200 200 150 68 ± 2 3X=400 120 • •
Vanguard RGDC4848-40 Moving Bridge 48 48 40 20 • 300 400 240 68 ± 2 3X=550 100 90 Air • • • • • •
Vanguard RGDC6448-40 Moving Bridge 48 64 40 20 • 300 500 240 68 ± 2 3X=600 100 90 Air • • • • • •
Vanguard RGDC8048-40 Moving Bridge 48 80 40 20 • 300 600 240 68 ± 2 3X=750 100 90 Air • • • • • •
Vanguard 120-48-40 Moving Bridge 48 120 40 20 • 300 800 240 68 ± 2 3X=300 100 Air • •
TechTran Development Corp.
Ph. 201-816-8185 Fax 201-567-7470
NexGen Bridge-Vert. 20-60 80-200 20-50 100 50-80 200 120 Mech. & Air • • •
View Engineering Inc.
Ph. 805-578-5000 Fax 805-578-5249 XY-axis Z-axis
Pinnacle Column, Vertical 10 7 4 0.1µm • 1.5+L/200 µm 2.5+L/100 µm 62-90 Linear recirculating • • • •
View Voyager V6 x 12 Column, Vertical 12 6 6 0.1µm • 4+L/100 µm 5+L/150 µm 63-73 Cross roller • • • •
View Voyager V12 x 12 Column, Vertical 12 12 6 0.1µm • 2+L/200 µm 2.5+L/100 µm 63-73 Linear recirculating • • • •
View Voyager V18 x 18 Fixed Bridge 18 18 6 0.1µm • 2+L/200 µm 2.5+L/100 µm 63-73 Linear recirculating • • •
View Voyager V18 x 24 Fixed Bridge 18 24 6 0.1µm • 2+L/200 µm 2.5+L/100 µm 63-73 Linear recirculating • • •
WENZEL America Ltd.
Ph. 914-347-7822 Fax 914-347-7881
LAF Horiz. Rail 157-236 62 70 20 • 140 + L/0.20 64-72 3X=200 + L/0.15 70 50 Air • • • • • • •
LH Series Bridge-Vert. 25-120 29-160 19-80 20 • 80 + L/0.35 68±2 3X=100 + L/0.25 40 240 Air • • • •
LH µStar Series Bridge-Vert. 25-120 29-160 19-80 20 • 60 + L/0.45 68±2 3X=80 + L/0.45 28 8,000 Air • • • •
LHF Bridge-Vert. 98-118 157-236 66-78 20 • 148 + L/0.30 64-72 3X=168 + L/0.25 74 50 Air • • • • • • •
RAD Plus Dual Horiz. Arm 216-472 118 70-98 20 • 800 + L/0.07 60-75 3X=1200 + L/0.04 400 70 Linear • • • • • • •
RAF Plus Horiz. Rail 157-236 40-63 48-83 20 • 600 + L/0.07 60-75 3X=800 + L/0.05 300 70 Linear • • • • • • •
RS Series Horiz. Arm 80-180 40-64 48-96 20 • 590 + L/0.06 68±4 3X=750 + L/0.03 350 120 Roller Bearing • • • •
RSD Series Dual Horiz. Arm 180-480 88-120 72-96 20 • 1,180 + L/0.04 68±4 3X=1,570 + L/0.02 600 50 Roller Bearing • • • •
Carl Zeiss IMT Corp.
Ph. 612-533-9990 Fax 612-533-0219
CARMET Horiz. Arm 79-197 47-107 59-83 40 • 62-75 3X=0.894 + L/50 Air • • •
Contura Fixed Bridge 28 39 24 20 • 63–95 3X=0.000106 + L/300,000 Bearings • Scanning • •
ECLIPSE Bridge-Vert. 28-40 28-84 20-24 20 • 114 + L/0.25 64–79 3X=138 + L/0.25 80 Air • • • •
ECLIPSE 550 Bridge-Vert. 20 22 24 • 2.4 + L/250 µm 65–78 3X=219 + L/250 µm 80 Air • •
Prismo-VAST Bridge-Vert. 28-63 35-118 20-39 20 • 0.035 + L/400 64–82 3X=0.055 + L/350 Air • Scanning • • •
SCANMAX Artic. Arm 34 16 16-19 20 • 60-95 3X=0.00019 + L/50,000 200 Bearings • Scanning • •
SMC Horiz. Arm 71-165 39-53 59-94 40 • 787 + L/0.12 68±5.4 3X=1,181 + L/0.1 • • • •
SMM Horiz. Arm 39-472 39-63 47-94 40 • 1,180 + L/0.025 68±7.2 • • • •
57
CMM Manufacturers Directory
A.A. Jansson Inc. on CMMs. Contract inspection and Zeiss Helmel Engineering Products Inc.
2070 Airport Road software training. 6520 Lockport Road
Waterford, MI 48327 Brown & Sharpe Charles Seifert Associates Inc. Niagara Falls, NY 14305
Ph. 800-526-7766 Fax 248-674-1234 200 Frenchtown Road 6420 Pleasant St. Ph. 716-297-8644 Fax 716-297-9405
www.aajansson.com North Kingstown, RI 02852 Library, PA 15129 www.helmel.com
New and used precision measuring equip- Ph. 800-283-3600 Fax 401-886-2727 Ph. 800-783-0670 Fax 412-833-1986 Helmel Engi n e e ring Products Inc. , a
m e n t , i n cluding CMMs, optical com- www.brownandsharpe.com Your source for precision metro l ogy CMM manu fa c t u rer for more than 27
parators, vision systems, surface plates, Brown & Sharpe has long been recog- products. Sales, service and calibration ye a rs ,o ffers a full line of CMMs, both
gage blocks, fixed limit gages and more. nized as a world leader in the design and of optical comparat o rs; toolmake rs ’ m a nual and motori ze d, f rom tabl e t o p
A2LA calibration services available on production of quality precision hand tools. microscopes; optical and video micro- models ranging from 12 x 12 x 10 in to 40
m a ny types of measuring equipment. Offering micrometers,calipers and indi- scopes; machine vision systems; CMMs; in. Z-axis model s. Helmel offe rs its
Repairs,upgrades and retrofits available. cators that meet every requirement and fit precision hand tools; surface and form- GEOMET software in three levels to sat-
Acu-Gage Systems every budget. From traditional mechani- measuring systems; re t ro fit ge o m e t ri c isfy most measuring needs.
175 Ammon Drive cal tools to faster and easier-to-read dig- readouts and computer-based systems for International Metrology
Manchester, NH 03103 ital equipment, Brown & Sharpe offers optical measurement equipment and Systems Inc.
Ph. 800-422-2283 Fax 603-626-1277 tools for every application and every shop CMMs; CMM and machine tool probes, 37100 Plymouth Road
www.acu-gage.com environment. systems and styli. Livonia, MI 48150
Acu-Gage Systems manufactures one-, Brunson Instrument Co. Davis Metrology & Mfg. Co. Ph. 734-591-3800 Fax 734-591-3850
two- and three-axis noncontact video- 8000 E. 23rd St. 2402 Cairo Road www.dmis-cmm.com
based measuring systems. Manual to fully Kansas City, MO 64129 Paducah, KY 42001 IMS provides a range of CMM machines
automated machines in sizes from 8 x 8 Ph. 877-632-7873 Fax 816-241-1945 Ph. 270-443-7843 Fax 270-443-7894 for lab and shop-floor use. Combined with
in. to 48 x 96 in. Automation options are www.brunsonkc.com Davis specializes in design and manu- its Virtual-DMIS CAD-based software
field-retrofittable. Acu-Gage offers cus- Brunson is your one stop for industrial facture of highly accurate large measuring product, IMS solutions enable seamless
tomized features, NIST-traceability, and measurement solution products and serv- machines and rotary tables. The company integration of measured data with design
full maintenance and annual recalibration ices. Among its products are Spatial Ana- re m a nu fa c t u r es all brand mach i n e s , information. Virtual-DMIS can also be
service. ly ze r, the new standard in metro l ogy including new electronics and controllers. retrofitted to any installed manual or DCC
American SIP Corp. software; the API laser measuring track- Ways are lapped to millionths for real CMM, regardless of brand.
530 Saw Mill River Road ing system; and optical tooling instru- accuracy, not virtual accuracy. Laser and JMAR Precision Systems Inc.
Elmsford, NY 10523 ments and accessories. Offering on-site electronic level calibration to identify all 9207 Eton Ave.
Ph. 914-592-8006 Fax 914-592-2383 field engineering, t ra i n i n g, repair and s o u rces of erro rs. Machine ge o m e t ry Chatsworth, CA 91311
www.amersip.com rental services. consultation. Ph. 800-793-0179 Fax 818-700-8984
SIP Geneva has t hree product lines: Burton Precision Co. Inc. Electronic Measuring Devices Inc. www.jmar-psi.com
l e n g t h - m e a s u r i ng a n d ca lib r a t i o n 5737 Vinton Ave. 199 Route 46 E. JMAR Precision Systems Inc. designs and
machines, 3-D CMMs, and machine tools. Comstock Park, MI 49321 Budd Lake, NJ 07828 manufactures video CMM measurement
Automation Components Inc. Ph. 800-358-4266 Fax 616-784-4368 Ph. 973-691-4755 Fax 973-691-4745 and inspection systems, motion con-
25 Kenwood Circle, No. 15 www.burtonprecision.com www.emdsceptre.com trol/positioning systems and laser-proc-
Franklin, MA 02038 Automated Vision—Real-time process Electronic Measuring Devices Inc. is the essing systems used worldwide. JPSI’s
Ph. 800-854-4873 Fax 508-520-3322 monitoring for physical defects as well original developer and manufacturer of leading-edge technologies are used by
www.automation-components.com as dimensional inspection. the Scepter Software and constant-con- semiconductor and micro e l e c t ro n i c s
Automation Components is a full-service tact scanning probe. The company man- industry firms for such applications as
metrology sales company with more than u fa c t u res the Legend CMM with the wafer defect/general BGA and solder-
25 years of experience. Our product line S c epter softwa re and scanning pro b e. bump measurements,laser scanning/cut -
features optical and video inspection sys- EMD also upgrades many CMMs manu- ting, and precision positioning.
tems, CMMs, SPC hardware and soft- factured by others to use the Scepter soft- JMC Technology Group
ware, CNC milling controls and digital ware and constant-contact scanning probe. 4622 Independence Square
read-out technology. ELM Systems Indianapolis, IN 46203
BETA LaserMike Ph. 847-526-5003 Fax 847-526-5022 Ph. 317-791-4450 Fax 317-781-2466
8001 Technology Blvd. Carl Zeiss IMT Corp. FARO Technologies Inc. www.jmctechgroup.com
Dayton, OH 45424 7008 Northland Drive 125 Technology Park The CE Johansson line of CNC CMM’s
Ph. 937-233-9935 Fax 937-233-7284 Minneapolis, MN 55428 Lake Mary, FL 32746 a re fa c t o ry floor compat i ble using a
www.betalasermike.com Ph. 612-533-9990 Fax 612-533-0219 Ph. 800-736-0234 Fax 407-333-4181 patented advanced automatic temperature
BETA LaserMike manufactures lasers for www.zeiss.com/imt/ www.faro.com compensation for operation in variations
measurement. Carl Zeiss IMT Corp. designs and manu- Fryer Co. Inc. exceeding 40°F. Models range from the
Bobier Tool Supply Inc. factures industrial metrolo gy equipment 11177 Dundee Road R u by at a 16 in. cube of travel to the
G-4163 Corunna Road (CMMs, gage calibration systems, hori- Huntley, IL 60142 Saphir 40 x 80 x 40 in.; larger custom
Flint, MI 48532 zontal-arm machines and gear inspection Ph. 847-669-2000 Fax 847-669-2056 sizes also available.
Ph. 800-288-2871 Fax 810-732-3909 c e n t e rs , fo rm - roundness and surfa c e www.fryerco.com Laser Design
Optical comparat o rs; hori zontal arm , measurement instruments, and noncon- Provider of optical measuring and inspec- 9401 James Ave. S., Ste. 162
unrestricted rotary scanning and special- tact form metrology instruments). tion equipment and systems. Products Minneapolis, MN 55431
and standard-sized CMMs; vision and Certified Comparator include the Nikon Veritas and Nexiv CNC Ph. 612-884-9648 Fax 612-884-9653
video systems; microscopes; precision Products Inc. 3-D multisensor measuring systems, opti- www.laserdesign.com
hand tools; pin, p l u g, ring and thre a d 712 N. Fairfield Road cal comparat o rs , t o o l m a ke rs ’ m e a s- LK Metrology Systems Inc.
gages; force gages; gage blocks; virtual Beavercreek, OH 45434 urescopes,stereo microscopes and digital 12701 Grand River
reality CMM programming softwa re ; Ph. 937-426-9677 Fax 937-426-4816 image analysis, and archiving/annotation Brighton, MI 48116
CMM software upgrades; modular CMM www.certifiedcomparator.com systems. Services include maintenance Ph. 810-220-4360 Fax 810-220-4300
fixturing or custom builds; touch probes; Sales representative for Carl Zeiss CMMs, and calibration (ISO/IEC Guide 25 and www.lk-cmm.com
and repair and service. Z e i s s / T s k , Optical Gaging Pro d u c t s ’ A2LA-accredited). LK Metrology Systems is a premier man-
Bradford Instrument & Gage Inc. Video/Optical Inspection, Acu-Rite and Giddings & Lewis—Sheffield ufacturer of CMMs and integrated soft-
2443 E. Lincoln Highway Metronics’DRO and Software Systems. Measurement w a re a n d ha r d wa r e so l u ti o ns fo r
Coatesville, PA 19320 NIST-traceable calibrations and certifi- 721 Springfield St. measurement.
Ph. 610-384-6800 Fax 610-383-9426 cations on all manufacturers’ optical com- Dayton, OH 45401
parat o rs ,v i d e o ,m i c roscopes and repairs. Ph. 937-259-6039 Fax 937-254-5054
VDI/VDE and B89 calibrations and repair www.giddings.com
CMM Manufacturers Directory
u n attended to speed m anu fa c t u ri n g, Mycrona Inc. NWCI
improve quality and lower costs. 14777 Keel St. 3819 Superior Ridge Drive
Micro-Technic Instruments Inc. Plymouth, MI 48170 Fort Wayne, IN 46808
319 Queen Anne Road Ph. 734-453-5880 Fax 734-453-4076 Ph. 219-482-5473 Fax 219-482-9077
Teaneck, NJ 07666 www.mycrona.com www.nwinspection.com
Ph. 800-692-8252 Fax 201-692-7941 SIGNUM—A stand-alone video inspec- NWCI is an ISO 9002- and ISO 17025-
Mahr Federal Inc. Micro-Technic Instruments specializes in tion system for general metrology appli- certified full-service calibration and metrol-
1144 Eddy St. optical inspection instruments for indus- cations; size ranges 12 x 12 x 6 in. through ogy laboratory. Nationally accredited lab to
Providence, RI 02940 try. Featuring machine vision systems for 24 x 24 x 16 in., high-precision, Windows- meet the requirements of QS-9000. Tech-
Ph. 800-333-4243 Fax 401-784-3246 automatic inspection and process control NT-based, multisensor-capable. nicians are ASQ- and RAB-certified.
www.mahrfederal.com of production equipment. Special capa- N.W. Contract Inspection Inc. Operations Technology Inc.
Mahr Fe d e ral provides dimensional bilities in analog and digital video for 3819 Superior Ridge Drive (OPTEK)
gages, including hand-measuring tools; inspection and material analysis,includ- Fort Wayne, IN 46808 P.O. Box 408
dial and digital indicators; mechanical, ing metallography. Sales engineers for Ph. 219-482-5473 Fax 219-482-9077 Blairstown, NJ 07825
electronic, air and height gages; length Leica Industrial Microscopes. www.nwinspection.com Ph. 908-362-6200 Fax 908-362-5966
metrology; dimensional standards; gage Mitutoyo America Corp. Full-service calibration, inspection and www.optek.net
calibration systems; laboratory gages; 965 Corporate Blvd. measuring facility. ISO 9002 and ISO
geometry and form metrology; surface Aurora, IL 60504 Guide 25 certified. CMM dimensional
finish and contour metrology; gear metrol- Ph. 630-820-9666 Fax 630-820-7403 inspection of parts, gages and fixtures for
ogy; custom gages; laser, optical and www.mitutoyo.com PAPPs and gage R&Rs. Calibration of
touch probe CMMs; gage repair and cal- Mitutoyo America Corp. sells and serv- gage blocks,thread gages,micrometers,
ibration; and rotary stroke bearings. ices more than 5,000 precision measur- calipers and more. CMM training and Optical Gaging Products Inc.
MetricVision ing tools and instruments for dimensional metrology consulting. 850 Hudson Ave.
Gateway 95, 8500 Cinder Bed Road measurement,including calipers,microm- Nikon Inc. Rochester, NY 14621
Newington, VA 22122 eters, indicators, DROs CMMs, vision 1300 Walt Whitman Road Ph. 800-647-4243 Fax 716-544-0131
Ph. 703-550-2945 Fax 703-550-2949 measuring systems and form-measuring Melville, NY 11747 www.ogpnet.com
www.metricvision.com equipment. Ph. 631-547-8500 Fax 631-547-8518 Optical Gaging Products Inc. is a leading
Coherent Laser Radar is the automation Mora Precision Systems Inc. www.nikonusa.com m a nu fa c t u rer of optical comparat o rs ,
tool for noncontact, precision, 3-D meas- 21300 MacArthur Blvd. Nikon Inc. is a manufacturer and distrib- multi-sensor video metrology systems,
urement in labs and factories and design Warren, MI 48089 utor of optical inspection equipment. laser profile scanners and linear slides.
departments. It’s fast, portable, easy-to- Ph. 800-528-9785 Fax 810-759-2423 P roducts include stereo micro s c o p e s , Since 1945, OGP has delivered thousands
use and accurate. Align large parts,certi- mora-cmm.com autocollimators, optical comparators,tool- of measurement systems to manufacturing
fy tooling, monitor repeatability, scan m a ke rs ’m i c roscopes and automat e d companies worldwide.
complex geometry, compare parts to CAD video-inspection systems.
and reverse engineer. The system can run
CMM Manufacturers Directory
Pacific Inspection Co. Poli S.p.a. Romer Inc. coordinate measuring machines, optical
3002 Dow Ave., Ste. 504 Via Oberdan 5 27240 Haggerty Road, Ste. E-20 measuring projectors and vision systems.
Tustin, CA 92780 Varallo Sesia (Vc), 13019 Farmington Hills, MI 48331 Starrett was founded in 1880 and has loca-
Ph. 714-838-2525 Fax 714-838-2761 Italy Ph. 800-218-7125 Fax 248-324-0525 tions around the world.
www.pacificinspection.com Ph. 39-0163-568701 Fax 39-0163-53881 www.romer.com TechTran Development Corp.
Manufacturer’s representative and distrib- www.polispa.com Romer is the innovative leader in portable 80 Broadway
utor of precision measuring instruments Precision Tool Distributors Inc. coordinate measurement. Romer articu- Cresskill, NJ 07626
and quality control inspection equipment. 553 Weddell Drive lating arm CMMs feature infinite rotation Ph. 201-816-8185 Fax 201-567-7470
A l s o ,c a l i b ration of optical comparators Sunnyvale, CA 94089 of principal axis and use contact, non- View Engineering Inc.
and video measuring systems. We provide Ph. 888-747-1254 Fax 408-747-0886 contact, laser and tube probes for fast and 1650 N. Voyager Ave.
software training for OGP Inc. video sys- www.pretool.com a c c u rate inspection and reve rse engi- Simi Valley, CA 93063
tems and Mitutoyo CMMs. Specialists in dimensional gaging and neering using your favorite software. Ph. 805-578-5000 Fax 805-578-5249
Paul W. Marino Gages Inc. inspection since 1963. Eve rything in SMX Corp. www.vieweng.com
21300 MacArthur Blvd. inspection from calipers to CMMs. Serv- 222 Gale Lane Voyager Series—Automated, noncontact,
Warren, MI 48089 ices include a fully equipped contract Kennett Square, PA 19348 vision-based, 3-D measurement for use
Ph. 800-528-9785 Fax 810-759-2423 inspection lab featuring Zeiss high-accu- Ph. 610-444-2300 Fax 610-444-2323 as a key component of quality control in
www.pmargage.com ra cy CMMs and video-based opt ical smxcorp.com diverse industries.
Exclusive North American distributors of measurement systems. The SMX Laser Tracker is the most accu- Wenzel America Ltd.
Alufix modular fixturing, a highly accurate QA Productivity Systems rate portable CMM laser tracker in the 33 Nepperhan Ave.
system for rapid assembly of work-hold- 236 Alpine Drive world. The laser tracker measures parts or Elmsford, NY 10523
ing fixtures. A complete line of accessories Rochester, NY 14618 tooling from 0 ft. to 125 ft. from a single Ph. 914-347-7822 Fax 914-347-7881
is available, including clamps, vee and delta Ph. 716-381-9735 Fax 716-381-8317 location to an accuracy of 0.001 in. at 20 www.wenzelamerica.com
blocks,screw-jacks, and off-grid devices. A manufacturer’s representative organi- feet. It provides high-speed surface scan- Wenzel America markets, sells and sup-
Alufix is ideal for measurement and inspec- zation dealing with dimensional-measure- ning to 1,000 observations per second. ports Wenzel CMMs throughout North
tion, and all parts are reusable. ment equipment. They specialize in vision, The L.S. Starrett Co. America. Wenzel offers a complete line of
Penco Precision multiple-sensor CMM technology, CMMs, 121 Crescent St. C M M s ,f rom small bridge-style machines
P.O. Box 8105 borescopes, fiberscopes, light sources, Athol, MA 01331 to machines that are 40 meters long. They
Northfield, IL 60093 rotary tables,concentricity gages, meas- Ph. 978-249-3551 Fax 978-249-8495 can be equipped with a variety of probing
Ph. 847-446-3606 Fax 847-446-3645 uring lasers, alignment lasers ,l a s e rs for www.starrett.com systems. Wenzel software provides user-
Manufacturer’s representative carrying calibration and laser micrometers. Also, Manufacturer of a complete line of pre- f ri e n d ly solutions to many measuri n g
optical and mechanical inspection equip- the manufacturer of the Perform-A-Check cision measuring tools and equipment. applications using the latest CAD-based
ment. Comparators,CMMs,microscopes, system for the calibration of CMMs. M o re than 5,000 pro d u c t s , i n cl u d i n g and DMIS-based metrology software. The
video systems, thread gages and hand gages of all types: micrometers, indica- Wenzel metrology software has an ACIS
tools are available. tors,calipers,height measurement, gage CAD kernel and a Microsoft Access data-
blocks/standards, granite surface plates, base integrated within the software.
qd