ALLEN .
GWYNNES
NIMBUS END-SUCTION PUMPS
AGN series
(Since 1976 in Malaysia)
...The pump to trust Se2
ieneALLEN .
GWYNNES
Pa ui)
The ‘NIMBUS’ pumps - The single
stage end-suction centrifugal type
designed for a wide variety of appli-
cations.
Spare parts stocking is cut to mini-
mum through high interchangeabil-
ity of manufactured components. The
standard casing mounted arrange-
‘ment feature" BACK PULL-OUT "
{facility when a spacer coupling is
used.
APPLICATIONS
Impeller
Shaft
Stuffing
Box
Bearing
Bearing
Housing
1) Chiller & Condenser Pumps
2) Colling Tower Pumps
3) Tranfer System
4) Swimming Pool Pumps
High efficiency volute with self-venting
vertical centre line discharge. Wear
rings can be fitted as an optional
feature.
Fully shrouded impeller designed for
high suction lift. Hydraulically and
statically balanced.
Large diameter shaft designed to take
full load stresses with minimum defle-
tion, Fully machined and ground
sections where fine finishing and
dimensional tolerances are critical. Six
designs of shafts for 45 sizes of pumps.
YW \
Standard soft packed with high quality
and fitted with lantern ring to prevent
air leakage into pump casing when
operating on suction lift. Shaft sleeve is
(fitted onto larger pump sizes to prevent
direct wear on shaft. Mechanical seals
to suit specific service condition are
available for leak-free operation.
Two identical bearings sized for long
running life under maximum load
operation. Grease lubrication is stan-
dard.
Sturdy design to ensure rigidity and
vibration-free operation. Five design
for 45 sizes of pumps.
5) Fire Fighting
6) Palm oil / Agriculture
7) Hot and Cold Water
CirculationHEAD (ET
HEAD ED
‘SHEAD OMETES)
HEAD @AETRES)
10
CCU METRES He
100
700
cu meTRES HR,
205
Cu ets
2068
2920 revs/min
100 1009
‘00-400 4001000 2000
1760 revs/min
109 1099
oo 600 0002000 A000
1460 revs/min
00 6001000 BOG