Professional Documents
Culture Documents
DS FlourMilling COM 0115 ENG PDF
DS FlourMilling COM 0115 ENG PDF
4 Description
The COM Bag Compactor for torn empty bags consists of a
mild steel or stainless steel trough with appropriate surface
finishing. The U-profile trough is longitudinally split in
half to facilitate replacement of the SINT® liner that helps
introduction and further compression of the broken bags.
The Bag Compactor is equipped with a suitable direct drive
unit. At the drive end the compactor is equipped with an end
plate fixed to the end flange of the trough for assembly of
the end bearing complete with flanged shaft coupling for the
bag compacting screw. The other trough end is connected
with a tapered pipe that facilitates the progress of the com-
pacted broken bags. At the end of this pipe a polyethylene
tube for disposal of the waste bags can be fitted.
Function
The COM Waste Bag Compactor receives entire empty bags or bag fragments from a bag emptying device compacting the bags to
Application
COM Waste Bag Compactors are fitted on the outlet of an RSM-210 Manual
Bag Opener for the compaction and disposal of waste bag material.
www.wamgroup.com
Flour Milling
COM Waste Bag Compactors
Overall Dimensions
Rights reserved to modify technical specifications.
COM
DS.210.COM.EN.January 2015.R01
COM 030 320 320 245 440 245 67 435 600 2,436 640 496 300 1,000 218 357 584 435 484 325 624 564 435 3 128.3 4 136 3 128.3
COM 040 320 320 305 575 305 95 540 660 2,906 640 868 398 1,000 218 420 970 540 850 425 1,010 940 540 5 100 5 185 5 100
This datasheet might not show the complete range but only the models most suitable for the application.
www.wamgroup.com