ONE ET OSSD BRAG OF Weel Sycten
~ 95-1). 1016 Q.P. Code : 729203
(hour Max.Marks: 80
Instructions: |) Question No, 1 is compulsory
2) Answer any three from the remaining five questions,
3) Use of Design data book is permitted.
4) Use your judgment for unspecified data, if any.
QUI) Answer any four of the following: = 20}
a) Give the basic constructional details of different types ropes used rane, And
what do you understand by 6 x 37 rope?. e
b) Explain different types of take-up arrangement used in belt con(y OF.
) What are the different types of piston rings ?. Explain the f “ie thers.
d) What are the materials used for the following I.C. Engine chs. lustify
i) Cylinder block ii) Crank shaft ifi) C i iv) Gudgeon pin
e) Explain with diagrams, how the structure and ray di are different from each other
in multi-speed gear box
f) What do you mean by morphology stot
explain any two phases of it
Q2. a) A 20° troughing belt conveyor has the idata (16)
Material conveyed Goa ( from mine)
Inclination of conveyor & iv”
Lump size : 80mm
Capacity e Oo + 400 tph
Length of conveyor NX 120m
Design the conveyor f am
i) Motor power a i) Belt width iii) No. of troughing idlers and return idlers
iv) Belt driverPulley
b) What are the di pes of gear pumps. Explain with sketch, the working of any one
of them. (04)
Q3.a)A fi cc, Single cylinder, water cooled, vertical, petrol engine has the following
rake power = 50 kW
‘Compression ratio =7
Mass of reciprocating parts = 1.5 kg
Over speed = 2400 rpm
Speed= 2000 rpm.
Design the following components of L.C.Engine and sketch them with dimensions.
i) Crank shaft ii) Crank pin iti) Main bearings, (as)
[Turn Over |Q.P. Code : 729203
&
§ ) Explain how the design approach of petrol and diesel engines differs from each other.
(
Q.4) The following specifications refers to an EOT Crane:
Application : Class-ll oO
Load to be lifted 120 kN
Hoisting speed S m/min
Maximum lift 2 15m e
a) Select suitable type and size of wire rope for an expected lig@of 12 gponths. (04)
b) Design the following components of EOT crane,
wr i) Hook ii) Cross-piece of the hook iii) snag? 9 Rope drum, (16)
Q.5) The Centrifugal pump has to work with the followin tions:
Static suction head 3m
Static delivery head 8m
Length of suction pipe & 7m
Length of delivery pipe 50m
Discharge 850 Ipm
Working fluid & water at 30" C
‘The pump is directly connected moter, Design the pump completely for
pumping water. e (20)
Q6 a) Find the rpm values Au r range served by each rpm in Geometric , Harmonic and
Logarithmic Progressions ther based on the following conditions: (13)
al Minimymspeedy/n; = 30 spm
Maxintut speed, n, = 400 rpm
N
fr steps, z= 12
i , v= 20 m/min
And draw cS nematic) diagram as per the Geometric Progression
6) methodology and Optimum Design. (05)
<