The CNC program instructs the machine tool to: 1) select the G-code coordinate system and set the spindle speed, 2) rapidly move the tool to a height of 150mm above the workpiece and turn on the spindle, 3) slowly move the tool down 1mm into the workpiece while cutting at a feed rate of 119.4mm/min, then 4) rapidly retract the tool up and move it to the coordinates X=-120mm and Y=387mm before ending the program.
The CNC program instructs the machine tool to: 1) select the G-code coordinate system and set the spindle speed, 2) rapidly move the tool to a height of 150mm above the workpiece and turn on the spindle, 3) slowly move the tool down 1mm into the workpiece while cutting at a feed rate of 119.4mm/min, then 4) rapidly retract the tool up and move it to the coordinates X=-120mm and Y=387mm before ending the program.
The CNC program instructs the machine tool to: 1) select the G-code coordinate system and set the spindle speed, 2) rapidly move the tool to a height of 150mm above the workpiece and turn on the spindle, 3) slowly move the tool down 1mm into the workpiece while cutting at a feed rate of 119.4mm/min, then 4) rapidly retract the tool up and move it to the coordinates X=-120mm and Y=387mm before ending the program.