YARD OF THE PEOPLE’S REPUBLIC
OF CHINA
PE RIES RE
GB/T 13912-2002
Replace GB/T 13912-1992
lot dip galvanized coatings on fabricated
articles—Specifications and test methods
RARBR AWA
Hot dip galvanized coatings on fabricated iron and steel
i fications and test methods, MOD)GBY/T 13912-2002
1 Scope...
2 Normative references...
3 Terms and definitions...
4 Generic requirements ..J
4.1 Files that user shall
4.2 Base metal
4.3 Hot dip galvanizing
4. Safety snr
5 Sampling
6 Requirements on hot dip
6.1 Appearance,
6.2 Thickness.
6.3 Uncoated areas ai
6.4 Adhesive power..
65 Acceptance regul
‘7 Test methods ..
7.1 Appearance test
72 Coating thickness
Requirements on safety.
.) Thickness determinatiorForeword
This national standardjis modified in relation to IS01461: 1999, Hot dip galvanized
coatings on fabricated irdn and steel articles-Specifications and test methods, MOD.
‘This national sta was re-drafted in accordance with ISO1461: 1999, while
chapter and clause compprison table between this standard and ISO 1461 is listed in
significant changes in this national standard over ISO1461:
ide technical aspects, while technical differences between
-It is required that ea iHfavboted se shal tote lee haa 10 ex
~The thickness of reppiring layer shall be 30 11 m thicker than the minimum
and Annex E are infor ive annexes,
coatings Standardization chology Ct Committee.
This national standard Wwas drafted by Wuhan Material Protection Facility.
This national standard fvas jointly drafted by Haerbin Iron Tower Factory.
‘The main drafters of ti{s national standard are Wu Yong and Li Chunyan.