Professional Documents
Culture Documents
HVACR Tech Bulletin 195 Cool Seal Application Ratio Designed Template Indesign
HVACR Tech Bulletin 195 Cool Seal Application Ratio Designed Template Indesign
“If the system’s oil charge is known, the amount of Cool Seal required can be
calculated exactly, resulting in the least cost for good performance.”
If a system’s oil charge is known, the most economical dosage of Cool Seal can be determined by using a volumetric sealant to oil ratio of
1:30, or 3.25%. This amount represents the minimum amount of Cool Seal required to perform properly.
Smaller doses will still work, but not as quickly as if a system were to be properly dosed.
Larger doses are safe and may perform slightly better, but not to a large degree.
CONCLUSION
Our experience with the Cool Seal product have shown that a 1:30 ratio is safe, effective and economical.
HVAC/R
12/17 A17353
PRINTED IN USA