Professional Documents
Culture Documents
Potato Chips Machines Complete 15 & 25 & 50 KG PER HR
Potato Chips Machines Complete 15 & 25 & 50 KG PER HR
Mobile;- 8219560500
1. Potato Peeler 14” M/c with ½ HP Godrej motor SS Model, In this step washed
potatoes are poured into the drum of the potato peeler from the top, the inner of
the drum is coated with abrasive carborundum, as the base of the drum rotates
the potatoes strike against the abrasive inner wall which removes the skin, this
processing requires minor flow of water through a pipe to remove the skin from
the walls, the peeled potatoes are removed from the side of the drum through a
gate, Capacity 120 kg per hr of potatoes, 6 kg in a batch cycle of 3 mins,14”X14”
DRUM
2. Potato Slicer (SS Self pressing model) With dies for plain wafer, Ripple wafer (V
cut) Shredding 1.5 mm x 12 mm(Or size that you can propose) with ½ HP GE
electric motor, The peeled potatoes are fed in this machine from the top into the
cutter head, flow of water is required in slicing potatoes properly, Capacity 200
kg per hr of potatoes,three cutters total.6” DIA OF DIE
Rate (capacity 5- 6kg namkeen in single batch of 3mins, . 11” H x 14” Dia Drum
4. Seasoning Drum SS Contact model with 1HP drive motor 4’ model having
capacity of 10-12 Kg of chips, with ac frequency drive, with hindustan elec motor
5. Oil heater based batch fryer SS model 36” kadai with internal heat exchanger ,
manual lifting system with SS basket or Rectangular model
About Fryer:
This Fryer has following important Features:
All Contact Parts & Covering of stainless steel SS 304 Grade duly buffed &
polished..
Feeding is manual.
Multiple inlet for hot oil from inbuilt oil heater, outlets for inbuilt oil heater from
Kadai
Easy oil draining of edible oil due to special design of SS tubes
Oil capacity of system is apprx 150 liter
Diameter of batch fryer is 53 inches, height is 3.3 ft
Not in scope of supply :
o Cable from control Panel to electric motor.
All coilings are SS 304 1” NB, fitted beneath the kadai chamber insulated by
ceramic wool grade 128,outside body SS sheets 3 mm,
Burner will be Ecoflame MAX 15
Flow rate of pump 20 Cu Meter per hr i.e. 20,000 liters per hr eventual flow rate is
less due to pipe resistance
3 HP SS pump provided with oil heater for oil flow
Description:
A) The Batch fryer unit contains fabricated SS kadai of 3 mm SS 304 sheet, The edible oil
flows from the bottom of the kadai to the filter and than it is pumped inside the inbuilt oil
heater where it is heated in number of SS coils and finally it reenters the kadai through
multiple points to provide even heating, the oil holdup of the system is 100 liters
B) Then there is the inbuilt oil heater unit this is where the actual heating of oil takes
place in this unit (similar to a thermic system)there is a coil beneath the kadai below the
kadai burner is fitted. The inlet and the outlet of the oil heater is connected to the Kadai
through a high capacity pump this pump circulates the oil continuously between the two
units .
MODEL 3 CAPACITY 50 KG PER HR
6. Oil heater based batch fryer SS model 48” kadai with internal heat exchanger ,
manual lifting system with SS basket or Rectangular model
About Fryer:
All coilings are SS 304 1” NB, fitted beneath the kadai chamber insulated by
ceramic wool grade 128,outside body SS sheets 3 mm,
Burner will be Ecoflame MAX 15
Flow rate of pump 20 Cu Meter per hr i.e. 20,000 liters per hr eventual flow rate is
less due to pipe resistance
3 HP SS pump provided with oil heater for oil flow
Description:
A) The Batch fryer unit contains fabricated SS kadai of 3 mm SS 304 sheet, The edible oil
flows from the bottom of the kadai to the filter and than it is pumped inside the inbuilt oil
heater where it is heated in number of SS coils and finally it reenters the kadai through
multiple points to provide even heating, the oil holdup of the system is 150 liters
B) Then there is the inbuilt oil heater unit this is where the actual heating of oil takes
place in this unit (similar to a thermic system)there is a coil beneath the kadai below the
kadai burner is fitted. The inlet and the outlet of the oil heater is connected to the Kadai
through a high capacity pump this pump circulates the oil continuously between the two
units .
TERMS AND CONDITIONS
Above rate is Ex factory Indore, Transportation charges extra, No sales on
exports
Packaging charges extra
18 % GST extra
Advance 40%, balance against proforma invoice before delivery.
Wire/Cable is not in scope of supply.
Way bill and road permit required advance
Installation charges extra ,to and fro fare indore to indore and food
accommodation extra
All legal matters subject to indore jurisdiction
We hope you shall find this in order, hope you shall favor us by placing your
valuable order with us.
Visit our new site www.dynamechengineers.com
Thanking you
Sincerely,
R Mirchandani
For Dynamech Engineers