Professional Documents
Culture Documents
Flattening The Harness
Flattening The Harness
Then, you begin manually flattening the harness segments. Next, you automatically fan the remainder of the
harness.
Once the harness has been fanned, you assemble the connector components into the harness, editing the
orientations of flat locations as necessary. Next, you fan out the connectors.
After you have fanned all the connectors, you check the flattened status of the harness and flatten a closed loop
in the harness. Finally, you view the flattened harness.
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-0f6... 31-10-2017
Flattening the Harness Page 2 of 2
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-0f6... 31-10-2017