No. 8A, Jalan Gaya 26, Taman Gaya, 81800 Ulu Tiram, Johor.
Tel: 07-8610021, 07-8614690 Fax: 07-8610248
Email: gcalibration@gmail.com Website: g-calibration.com
CERTIFICATE OF CALIBRATION
Certificate No + GcLis-85813_, Date Of Issue : 08 Nov 2018 Page t of 2 Pages
~e G CALIBRATION SDN. BHD. ¢o 10: 227201
Issued By : G CALIBRATION SDN. BHD.
Customer : SAPURA FABRICATION SON. BHD.
PLOT D1, Lumut Port Industrial Park,
Kampung Acheh, Mukim Lumut,
Daerah Manjung, 32000 Sitiawan
Perak, Malaysia Approved Signatory
Instrument Description
Instrument : Theodolite
Serial No : A301521 Model Nivo 5.M
Manufacturer : NIKON Types >
Instrument Condition Upon
Receiving Physically in good condition.
Returning, £ .Calibrated and tested serviceable,
2.Calibration Due Date requested by customer.
43.The user should be aware that there are factors that may cause this instrument
to drift out of calibration before its specified calibration due date has exsires. . 7
Environmental Condition
Temperature 12 4 1 °C
Relative Humidity 55 tS SGRH
Calibration Date + 08 Nov 2018 Customer Request Due Date: 08 Nov 2019
ration Method: This instrument was calibrated using calibration procedure
Document No. : GCM-67
Place Of Calibration G CALIBRATION SDN. BHD.
Calibration Reference Standards Used:
Reference Standards Serial No ‘Traceability Cal. Due Date
Angle Block Gcl-142 NMIM(tM'sia) (07 Aug 2019
Standard Scales GCI-137 ( 400306019 ) NMIM(M'sia) 2a sul 2021 >
Revitvecd,
“The expanded uncertainties are based on an strated conidence probably of approximately $5% and havea coverage aco of k=2 ules stated ohernise
‘This calibration has been performed in accordance wit tho laboratory approved procedure. The slandard instruments used in ths calibration are
traceable fo eer the National Standards maintained at the National Metrology Laboratory or other recognised Intemational Standard Laboratres,
This certificate shal not be reproduced excep in full and with wtlen consent of G Calibration Sdn. BhG CALIBRATION SDN. BHD. ¢»..o: 9237200)
No. 8A, Jalan Gaya 26, Taman Gaya, 81800 Ulu Tiram, Johor:
Tel: 07-8610021, 07-8614690 Fax: 07-8610248
Email: gcalibration@gmail.com Website: g-calibration.com
CERTIFICATE OF CALIBRATION
Certificate No + Gcl18-85813 Date Of Issue : 08 Nov 2018 Page of Pages
Issued By G CALIBRATION SDN, BHO.
Technical information
Capacity : 0 to 360 ° Resolution : 0°00'01"
Calibration Range = «Oto. «360 * Readability: 0°00’ 01"
Calibration Results
Unit :
Nominal Unit Under Test
Value Reading
_ 0 _ 0" 00" 00"
90 90° 00" 00"
180 7 180° 00°00"
| 270 269° 59°59"
360 359° 59°59"
Measurement Uncertainty 0" 00'02"
v
Coverage factor, k: 2
Mecsde/’
(Maszaidi Bin Mespah )
Calibrated By
‘The expanded uncertainties are based on an estimated confidence probability of approximataly 95% and have @coverago factor ofk=2 unless stato otherwise
This callbration has been performed in accordance with the laboratory approved procedure The standard instruments used in this calibration are
traceable to ether the Natonal Standards maintained atthe National Metrology Laboratory or other recognised International Standard Laboratories.
‘This certificate shall not be reproduced except in fll and wih written consent of G Calibration Sdn. Bhd