INSTITUT TEKNOLOGI BANDUNG Jl. Ganesa 10, BANDUNG 40132, INDONESIA, Ph. +62-22-2502239, 2508131; Fax +62-22-2504209
RATES OF GEOMECHANICS LABORATORY TEST ( PT. LAPI ITB )
No Test Output Standard Unit Rates (IDR)
nat, dry, sat, w, 1 Physical properties ISRM 1981 Sample 100.000/specimen sr, n, e 2 Ultrasonic VP, Vs, Edin ISRM 1981 Sample 100.000/specimen Uniaxial 3 compressive c, E, ISRM 1981 Sample 300.000/specimen strength Cpeak, peak, Capp, 4 Direct shear ISRM 1981 Set 550.000/set app Triaxial (Single 5 C, ISRM 1981 Set 550.000/set Stage) Triaxial (Multi 6 C, ISRM 1981 Sample 700.000/set Stage) 7 Wedge FL,FA O&K Wedge Sample 100.000/ specimen 8 Point load index Is ISRM 1981 Sample 100.000/ specimen 9 Abrasivity ASF RSN 1997 Sample 450.000/ specimen 10 Brazilian T ISRM 1981 Sample 150.000/ specimen ASTM 11 Slake Durability Sample 550.000/specimen ID D4644-87 Coring 12 1. Igneous rocks cm 10.000/ cm 2. Sedimentary rocks cm 7.500/ cm 13 Preparation Sample 40.000/specimen
dry : Dry density Cpeak : Cohesion
sat : Saturated density peak : Internal friction angle w : Natural water content Capp : Apparent cohesion sr : Degree of saturation app : Apparent internal friction angle n : Porosity C : Cohesion e : Viod ratio : Internal friction angle VP : Compression wave velocity FL : Digging force per unit length Vs : Shear wave velocity FA : Digging force per unit area Edin : Modulus elasticity dynamic Is : Point Load Index c : Uniaxial compressive strength ASF : Abrasivity Scimazek Factor E : Modulus elasticity T : Tensile strength : Poisson’s ration ID : Slake-Durability Index