SHARP _ SERVICE MANUAL
Code: 00 ZPC1245S/ ME
move. PC-1245
CONTENTS =)
1. SPECIFICATION es 5 ea
2 DIFFERENCE BETWEEN THE PC-1245 AND TH
POA 250R ea eteteteceeSees |
3. CPU PIN NO AND SIGNAL DESCRIPTION
| 4, CIRCUITDIAGRAM
|
3
5. PARTS & SIGNAL LAYOUT CHART 4
6. PARTS LIST
7. PARTS GUIDE
This machine is a sister machine of the PC-1250 and the PC-1251 and is partly different from those
models in appearance and specifications.
SHARP CORPORATION1. SPECIFICATION
Model: Pc-1245,
Calculating Capacity
10 digits (mantissa) + 2 digits (exponent)
Calculating System: —_Algebric system (with priority judgement function)
Programming Language: BASIC
cpu: 8 bit CMos
System ROM: 24K bytes
Memory Capacity: System Ares
Area dedicatod to data
Program/date area
‘Stack: Sub-routine:
For-NEXT:
Function:
Dawa:
Operators: Basic caleulation:
Function calculations:
About 0.8K bytes
208 bytes
1486 bytes
10 stacks
B stacks
16 stacks
stacks
Addition, substraction, multiplication, division
Trigonometric and inverse trigonometric functions, logatith-
‘mic and exponential functions, angle conversion, square root,
interger, absolute, sign operators,
Editing Features Cursor left and right (> , <1, character insert {INS), character delete (DEL), ine up
and down (4, )
Memory Protection: Battery backup (the contents of programme and its data are retained at power-off.)
Display: 16-character liquid crystal display with 5 x 7 dot characters,
Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F)
Power Supply. 6V DC Lithium cells
‘Type: CR-2032
Operating Time: Approx. 300 hours (Display: 95555555, ambient temperature: 20°C (68°F). The
Power Consumption: 0.03 W
Dimensions: 135 (W) x 70 (0) x 9.5
‘operating time slightly varies depending upon the use of
battery.)
(H) mm
5.5/16" (W) x 2.3/4" (D)x 3/8” (H)
Weight: 115g (0.25 tbs) (with cells)
2. DIFFERENCE BETWEEN THE PC-1245 AND THE PC-1250
Pe-1245 6.1250,
Display capacity 16 choractrs(LF81786) 24 characters
Keyboard | Reserve function Not provided | Provided
entry —_| One-touch command entry Provided (18 kinds) | Assignable with the reseve
function
| Detinable function Provided (18 kinds) Provided (18 kinds)
RAM | Memory dedicated to data 26 memories | 26 memories
capscty _| Flexible memory 5] the bes 1438 bytes
tsi cru Same as PC:1250 Sc-61860a02
Display driver Same as PC-1250 sc-43596
RAM (2K bytes) Same as PC-1250 HM.6116
| ROM (16K bytes) | LH-532920 LH-532917
(Version ROM to meet the
change in specification)
Pwa Main PWB only Main PWB + RAM PW3. CPU PIN NO AND SIGNAL DESCRIPTION
Fa] Signer
1 [Aer | OUT | Aaa gy
— [Raw | OUT | Write clock, normaly high = SI
Gat | OUT | Sertpal ont ates as Sli acy RON |
[1 | IN| Oscitator input
00 | OUT | Oscillator output Se |
RES | IN | Reset input, active high. Normally, pulled down to low level
IN [ON (BREAK ke pt, oral lad down cow.
10 OUT | Output (MT out 1) of mierocassette signal to the CE-T25 option andthe buzzer.
un OUT | LCD driver control signal. Steen |
14_|iA7_ [IN/OUT | Key input/strobe signal, low during standby and Key'n pulse i generated when iow
15 | iA6 | W/OUT| Key inputlsvobe signal low during standby and Key n pulse gneated when ow
16 | iaS |im/oUT| Key input/strobe signal, low during standby and key-in pulse is generated when low.
v IWOUT] Ke puto nl lw Sarin rd yn ul ewe wesw
ie IN/OUT | Key inputstrobe signal, low during standby and key-in pulse is genereted when low.
19 INIOUT | Key input/strobe signal low durin standby and key in pulse is generated when low.
2 INVGUT Key puro nl lw din tardy rd Kym pul seme wher
21 | ee | iN _| ACK salt nai the GPU ob ata ounh VO pr (PU)
23 | tae | OUT | SEL2 output, PAype open drain.
36 | 15 | OUT | SELT out, Pave open din = ieee
28 [Restate ut ow dung snd nda ulead when ow. |
| 27 ey strobe 04
28_| i81_| OUT _ Key strobe output, low during stndby and key in pul is generated when fw
=) vm LCD power sai
30 VA | LeD power supply Me a a
31 | GNO | IN
‘our
a) HT
3 ney ‘ouT
[a [a3 | [our
3s | Ha | our
36 | HS | ouT
‘our
‘out
H8 | ouT |
Power supply.
LCD backplate signa, high impedance during standby and level puke during dislay
[LCD backolate signal, high impedonce during standby ond leet
‘igh impedence during standby and ‘evel pul during dspay
LCD backplate
| ECO_twceoite
high impedance during standby and A-evel pulse during display
LCD backplate Ihgh impedance during uring alspay.
LCD backel
high impedance during standby and level pulke during ditplay
[LCD backplate signal, high impedence duting standby end ‘evel pulte during display
LCD backolate signal, igh impedence during standby and ‘evel pulse during display.
2 M o D e L L I N G The Probability of Flow Induced Localised Corrosion From Critical Hydrodynamic Data and Fracture Mechanics Data of Scales From CO 2 Corrosion of Steel