(A 2376
Reg. No.
Name:
Sixth Semester B.Tech. Degree Examination, May 2011
(2008 Scheme)
Branch : Computer Science and Engg.
08.604 : DIGITAL SIGNAL PROCESSI
Time : 3 Hours Max. Marks : 100
PART-A
Answer all questions. Each question carries 4 marks.
Define and sketch unit step and unit ramp signals.
2. What are energy and power signals ?
Determine whether the signal
x(t)=3 cosV2t +7 cos Smt is periodic.
B
What is impulse response ? Explain its significance.
. State the final value theorem with regard to Z-transform.
6
Define Fourier transform of a discrete time signal.
7. State and prove the shifting property of DFT.
What are FIR and IIR systems ?
Compare the direct form-1 and II structures of an IIR system with ‘M’ zeros and
‘N’ poles
10
What is the advantage in linear phase realization of FIR system ?2376 2 (An 0 0
PART ~B
Answer any one full question from each Module. Each question carries 20 marks
Module - I
. a) Differentiate linear and non-linear systems. Test the following systems for
linearity
i) y(n) =x (n?) ii) y (n) = x(n).
aon
3,4
b) Given a sequence, h(n) = 41, n=3,
0, elsewhere
Where ‘n’ is the time index or sample number ? Sketch the sequence h(n) and
reversed sequence h (-n).
5
. a) Test the following system for linearity :
dx(t
i) yt) =12 x(t) ii) y(t) = 4x0) 2,
b) Find the unit-impulse response for the following linear system
y(n) = 0.5 x(n) - 0.5x (n — 2);
forn > 0, x (-2)=0,x 1)
Module ~ 11
13, a) What is region of convergence ?
b) Determine theZ-transform and their ROC of the following discrete time signals.
i) x(n) = (1, 3, 5, 6} ii) x(n) = 0.8" u(-n -1)
14, a) Draw and explain the flow graph of DIT radix-2 FFT.
b) Compute circular convolution of the following two sequences using DFT.
x (n) = {2, 1, 2, 1} and x, (n) = {1, 2, 3, 4]‘Ae 0 3 2376
Module - IIT
a) Explain the conversion of direct form-I structure to direct form-II structure
with an example.
b) Obtain the direct form-I and direct form-II realizations of the LTI system
governed by the equation
y(n) =-Fyn p43 y(n 2)+2 yin =3)+ x(n) + 3x(n~1) + 2x(n—2)
. a) Explain different structures used for FIR filters.
b) Obtain the direct form structure of the FIR system described by the following
equation.
y(n) =x(0) +5 x(a D+ Extn = 245 x(n=3) + Zx(n— 4).