Historical Record
Dimensions and Properties
ROLLED SHAPES
Steel and Wrought Iron
BEAMS & COLUMNS
As Rolled in U.S.A., Period 1873 to 1952
with Sources as Noted
Complied and Edited by
Herbert W. Ferris
AMERICAN INSTITUTE OF STEEL CONSTRUCTION
One East Wacker Drive, Suite 3100, Chicago IL 60601-2001COPYRIGHT, 1953
AMERICAN INSTITUTE OF STEEL CONSTRUCTION, INC,
PRINTED INUS.A,
FIRST PRINTING. 1953,
‘SECOND PRINTING 1058
HIRO PRINTING 1957
FOURTH PRINTING 1086
FIFTH PRINTING. 1988
SIXTH PRINTING 1973
SEVENTH PRINTING 1978
EIGHTH PRINTING. 1931
NINTH PRINTING. 1983,
TENTH PRINTING 1990,FOREWORD
Over @ period of many years the American Institute of Steel Construction has re-
ceived numerous requests for information on the properties of beam and column shapes
which ore no longer rolled. These requests usually come from architects, engineers,
builders ond investment trusts, interested in the alteration of, or addition to, existing
structures which might have been originally constructed many years ago and for which no
plons are presently available, It was felt that a valuable service would be rendered the
engineering profession ifall available infermation on the subject could be published in one
reference book,
The Institute had in its library many catologs and handbooks of steel producing
mills showing sections rolled in this country since the inception of the industry. With the
desire of supplementing this information s0 tht the coverage would be as complete os
possible, an extensive circulorization was made of rolling mills, structural steel fabrica-
toes, engineers, railroads ond libraries, osking for assistance. These vorious sources re-
sponded generously by loaning such historical material as they possessed. With the addi-
tion of sections currently produced it is believed that information on practically all beam
cond column sections produced in this country is provided.
Coreful study of the Explonctory Notes will provide further information on the scope
of this book. The tobular data is limited to steel and wrought iron beams and columns,
since other sections such as angles, chennels ond tees were standardized at an early
date ond have been produced with few significant changes, for many years.
The carly unit stresses as recommended by manufacturers ore tabulated. In the light
of present day recommendations, these eorly unit stresses con be considered ultra-con:
servative. To assist engineers who must ossess and evaluate the strength of existing
structures, the ASTM specification requirements for tensile strength and yield point are
‘olso tobuloted, together with the working stress recommendations issued by the A.1.S.C.
We wish to extend our sincere thanks to the mony engineers, fabricaters, rolling
mills and others who cooperated so generously in lending handbooks and catalogs which
would not have been otherwise aveilable, We olso wish to thank Herbert W. Ferris of our
staff for his willing assistance in compiling end editing this book.
JACK SINGLETON
Chief Engineer