until machine power on 2. Select the patient setting and start ventilation
Power off the machine
1. Press power button and select “ Active Standby”
2. Press and hold power button until power of the machine
Newport Power on the machine
1. Press and hold power on switch until power on the machine
(It place on back side of the machine)
Power off the machine
1. Press and hold power on switch until showing power off
command on the machine display 2. Press Accept button for shutdown the machine 3. Press Alarm reset button for silent the alarm (Red color button top of the display) Neumovent Power on the machine
1. Press power on switch
(It place on back side of the machine) 2. Add patient setting and press “Continue” on the screen 3. Press “Active” on the screen
Power off the machine
1. Press power off switch
(It place on back side of the machine)
Defibrillator
To Check the Defibrillator
1. Turn scholar knob up to low joule value
(10J, 20J etc...) 2. Then press Charge switch 3. Press Decharge switch it place on shock delivering paddle. Then wait few second for delivering to the shock (10J 0J on Display)
4. Turn scholar knob again up to “ARRET” position
Servo Power on the machine
1. Push power switch door
(It place on back side of the machine) 2. Turn on the power switch 3. Then pass the ventilator 4. Press power on button (It place on ventilator monitor front side)
Power off the machine
1. Press power on button and stop therapy
2. Push power switch door 3. Turn off the switch C-PAP Machine Power on the machine
1. Press Power on switch
(It place on back side of the machine) 2. Select the mode and setting using Double correct
button and Scholar knob
Unlock the machine
1. Press and hold Scholar knob with Double correct button
Same time for few second 2. Select and accept “Set time” using scholar knob
Power off the machine
1. Unlock the machine
2. Press Power of button 3. Select “stop therapy” 4. Press Power off switch (It place on back side of the machine) Mindray Scan Machine Power on the machine
1. Press Power on button on the keyboard
Power off the machine
1. Press Power on button
2. Move the courser on to the “Shutdown Command” using mouse on the keyboard 3. Then press Set button on the key board 4. Wait few second until shutdown the machine
Portable Ventilator Power on the machine
1. Press Power on button
2. Apply setting 3. Press and hold 2 sec Power on button start ventilation
Power off the machine
1. Press and hold 2 sec Power on button
2. Press Alarm reset button for silent the alarm
Bene Heart Defibrillator To Check the Defibrillator 1. Select “Manual Defib” mode
using scholar knob
2. Select energy value (low value) using “Energy Select” buttons
3. Press Charge button and wait few second
for charging the machine 4. Then press Shock button on the shock paddle (Number 3 button) 5. Then turn scholar knob again off position