Professional Documents
Culture Documents
Readme en
Readme en
MSFree Inc.
System requirements:
—————————————————————————————————
VL editions: Windows Vista, 7, Windows 8, 8.1, 10, Server 2008, 2008 R2, 2012,
Description:
—————————————————————————————————
Windows VL editions: Vista, 7, 8, 8.1, 10, Server 2008, 2008 R2, 2012,
—————————————————————————————————
Run KMSAuto Net.exe as administrator and use the interface. If you need additional
program features, enter into Professional Mode. The On/Off Professional Mode button
The easiest way to use the program is to pick the automatic mode. All you need to do is
click on the button if you want to activate and agree to create a scheduled task for
Tip: First you need to activate Windows and Office in manual mode, and only then,
when you are sure that the activation takes place, you can create a scheduled task for
If the system does not want to be activated in Professional Mode go to "Utilites" and
manually set GVLK key for the proper Windows Edition, and then try to activate again.
Additional Information:
—————————————————————————————————
To activate Windows 8.1 the TAP network adapter must be installed directly
and use the IP address 10.3.0.2-254 or use a special driver. All these features
To activate via LAN, the TAP interface can't be used to install and
If you reconfigure the program and it stops operating correctly - check the checkbox
—————————————————————————————————
/kmsset=yes - Run this program in quiet mode, install KMS-Service and exit the program.
/kmsdel=yes - Run this program in quiet mode, remove KMS-Service and exit the program.
/key=yes - Run this program in quiet mode, install the Windows key and exit
the program.
/task=yes - Run this program in quiet mode, create a scheduled task for Windows and
/taskrun=yes - Run this program in quiet mode, run the task scheduler for Windows and
/convert= - Run this program in quiet mode, preparation to perform the conversion
—————————————————————————————————
The activation will be done with the settings defined in the tab KMS-Service.
—————————————————————————————————
When you transfer the program to another computer, you need to reset the Auto Mode.
Activation would still be in automatic, but the mode may not be optimal
To reset the auto mode to the initial state you need to switch to any other mode,
and then again select auto. Everything is now reset to the initial state.
About how to activate the built-in program
—————————————————————————————————
The program can perform the activation with built-in KMS server Emulator in several
different ways. Why are there several of them?: the standard way to connect to the activation
server through the local host (127.0.0.2-254) was blocked in Windows 8.1.
All methods are intended for activation of something to cheat the system, do so
that it "thinks" that the KMS server is not on your computer, but somewhere far away in the
network.
—————————————————————————————————
Auto - the program tries to automatically find the way that best suits your activation
system. Attempts are being made to activate the system or Office for all admissible
ways your system has, and the one picked by the program it will be held to remember.
To reset to the initial mode, you can switch to any other mode and then select Auto.
Hook - method based on the substitution of the original file system changed on a special way.
The new version of the method works without physically replacing the file.
WinDivert- in the system a driver is installed at the time of activation and it keeps running
NoAuto - In this mode, there is no automation, there is need to set the way it will work.
Is intended for people who know better than me what, how and when to do and whether
TAP - the system is a virtual device. TAP activation is done through this virtual device.
The program includes two drivers for the TAP adapter. If you already installed one of
the drivers, the program will used the other driver to activate, resulting in your
KMSSS.exe Options
—————————————————————————————————
—————————————————————————————————
To run properly, it is necessary to add the file KMSSS.exe in the exclusion of your Anti-Virus!.
You need to perform 2-3 times "Removing KMS-Service" and restart your computer.
When working with the program it makes sense to check on the option "Save
settings in the program folder". In this case, the configuration file will be stored
—————————————————————————————————
KMS Log Analyzer.xlsm previous versions are incompatible with KMS Server Service v1.1.7
In order to save their old records should be transferred to the new
—————————————————————————————————
Perhaps you have a non VL product, not intended for activation of KMS-Service, for instance
Windows 7 Ultimate can't support KMS activation, or your antivirus blocks the activation.
If an antivirus is the culprit you can do the following: in the "System" tab click on the
blue label "KMS-Service" and in the window that appears remove the check mark. Then add the
—————————————————————————————————
I want to say thank you mikmik38, without his work this program would be just impossible.
To Hotbird64, for his KMS Client, Evgeny972 and guys from forum.ru-board.com for making
Ratiborus
Changelog:
v1.4.9
v1.4.8
-New KMS-Service.
v1.4.6
v1.4.5
v1.4.4
v1.4.3
v1.4.2
v1.4.0
v1.3.9
v1.3.8
-Added: Display the license expiration date (180 days 0 hours 0 minutes).
-Added in "Other utilities" restore system files from the disk with your
version/edition of Windows.
v1.3.7
v1.3.6
v1.3.5
-New TAP driver to support Windows 10. A random IP address is used and when the activation fails
check box is cleared.
-Re-compiled KMS Service. So antivirus software will not detect it as threat/false positive.
-In the "About" tab you can find a link to a page with my programs.
v1.3.4
-Changes in program for compatibility with antivirus software.
v1.3.3
-The program, when attempting activation of Office 2013 RETAIL converts the license channel
v1.3.2
-Small changes to the interface, added compatibility with Windows Technical Preview.
v1.3.1.b4
This script searches for installed but outdated update Office 2010/2013
v1.3.1.b3
v1.3.1.b2
-Fixed bug when working with command line parameters creating a scheduled task.
v1.3.1.b1
v1.3.0
-Added support to activate OEM editions: "Windows 8.1 Single Language with Bing",
"Windows 8.1 with Bing" and "Windows 8.1 Pro for Education"
v1.2.8
-ProduKey program updated from v1.65 to v1.66.
v1.2.7
-To view the log in the activation program now KMS Log Analizer.xlsm is integrated.
-The computer should have an application installed to view .xlms files (MS Excel).
-Work on adapting the program to the new format of the log file performed by Bort_Nick,
forum.ru-board.com.
v1.2.6.1
-Changed the way "Program Information" button works on the "About" tab.
v1.2.6
-Fixed a problem with key installation after executing the command "slmgr.vbs /upk".
-To avoid detection from antivirus modules, driver files are password protected.
%SYSTEMDRIVE%\ProgramData\KMSAuto\*.*
%SYSTEMDRIVE%\ProgramData\KMSAutoS\*.*
%TEMP%\KMSAuto\*.*
%TEMP%\PDK\*.*
v1.2.5
a GVLK forcibly.
-Fixed bug when working with command line parameters creating a scheduled task.
v1.2.4
v1.2.3
v1.2.2
-Fixed date and time displayed in hexadecimal format in the log file.
v1.2.1
-In Professional Mode, Advanced tab, the button "Convert Office RETAIL to VL".
v1.2.0
v1.1.9.b1
-Changed setting keys function for "Unsupported Product" (so reports WMI OS).
-Added the program KMS Log Analyzer, for easy viewing and conservation of
information of the log file from KMS-Service. The computer must have installed
an application for working with files .xlsm (MS Excel). Not ready yet!
v1.1.7 ÷ v1.1.8
-In "Auto" mode the program starts searching for a solution with the correct IP address.
-Fixed a rarely occurring bug related to the inability to delete files "Injector by deagles".
Program could hang with the message "Installation Hook, Injector by deagles"
-On the Utilities tab a button was added "Resetting the system is not valid."
Carefully read the message that appears when you click on this button!
v1.1.6
v1.1.4
-All modules of the program can work from ProgramData or the folder containing the program.
v1.1.2.b8
-ProduKey program is integrated into the executable file.
v1.1.2.b7
v1.1.2.b6
v1.1.2.b4
v1.1.2.b3
-Hook method uses a modified SECO Injector. Works at Activation and Renewal intervals
v1.1.2b2
-Option to connect to the KMS server where Hook mode works without replacing files.
-Added option in the task scheduler to create the task in the ProgramData\KMSAutoS path.
v1.1.1
v1.0.9.1
v1.0.9
-Dialog to change the product key appears only once per session with the program.
-When the scheduled task executes, the KMS-Service is no longer removed from the system,
if it was installed the first time.
-New added NoAuto option to disable automatic loading KMS-Service during activation.
-In Auto mode when the configuration switch is added, the analysis of the
system will always begin from the start position, and not from the previously stored.
-Before activating the system editon is defined and if it is 8.1 then the classic way
-Added a second type of TAP adapter to resolve the conflict with the already established TAP VPN.
-WinDivert v1.1 has been applied, so not "incidents" result in BSOD on x86 systems.
-Eliminate errors when in the file path a sign "&" (ampersand) is present.
v1.0.8
-Added a setting to remove the WinDivert driver. To avoid a possible crashing of your
-Added the ability to run the program with switches at the command line.
v1.0.8.b5
-The program combines three ways to connect to the KMS server, first try automatic mode
setting.
v1.0.7
v1.0.6
v1.0.4
v1.0.3
-Applied a modified KMS-Service. Allows for the use of each product your own ePID.
-Added support for activation of Core, Embedded Industry, Single Language, etc.
v1.0.2
v1.0.1
v1.0.0
-First release.