SL6000
RATING CHARTS
SUPER HEAVY LIFT (SHL)
KOBELCO CRANES CO.,LTD.
S2JG50006ZE01
14S8436=RO
2008.04KOBELCO SL6000 SUPER HEAVY LIFT (SHL)
Luffing Boom Rating Chart Supplemental Data
|. Ratings shown in chart are based on frealy suspended load and make no allowance 8.
for such factors as wind affect on lifted load, ground conditions, out-of-level,
operating speeds or any other conditions that could be detrimental to the safe
eperation of this equipment. The operator, therefore, has the responsibilty to judge
Unit: Metric-ton
‘Nain boom lifting capacity with auxiliary sheave attached
‘Main boom ratings with auxiliary shoave attached are the value which is a
the weight of auxiliary sheave frame and hook block on a
‘main boom rating shown in chart,
ducted
‘he existing. conditions and reduce liting loads and/or operating speeds accordingly Weieht of Auslary sheave fame: 07 ton
2 _ At any radius and boom length where no rating are shown on char, operation 9. _Auxery sheave ling eapacty
1s not intended nor approved. 1) Auilary sheave ratings are the value which is deducted the weight offaniiary
sheave frame and hook block on main boom from main boom ratings, However it
& Ratings inside of boxes[—] are limited by strength of material or other factor ‘shall not exceed 14.0 ton with single part line or 28.0 ton with two parts line.
xeon machine stability Weight of Auiliery sheave Framer 0.7 ton
4. The machine must be reeved and set-vp as stated in the operation manual and 2) The maximum main boom angle when using auxliary sheave shall not ekeeed
«ll the instruction manuals. f these manuals are missing, obtain rplacerants. ‘the maximum main boom angle without euxiiary sheave,
1) Machine must be levled to within 1% on a frm supporting eurace. {The permissible boom lengths to attach auxliary shoave are 36 m to 8 m
2) Boom backstops are required forall boom lengths.
10. Maximum hoist load for number of parts of tine for hoist rope
5. Operating radius i the horizontal distance from centertine of rotation to a vertical
Maximum hoist load for Main Boom (SINGLE DRUM)
ine center of gravity of the load.
tne through the contar of sravity No. of Part Line 1 2 3 4 5 é
8. Weisht of hooks, hook blocks, sings and other iting devices ara part ofthe total Mavirwm Loads Qw)_{ 197 | 275 [sa so | bos | oza
load, Their total weight must be subtracted from the rating to obtain the woight Maximum Loads (t) 149 | 280 | 420 | 560 joo | e40
that can be hited No.of Part Line 7 3 2 wo Tin 7 a
Maximum Leeds Gao [961 | 1,008 | 1200 | 1.078 | anv] 1600
7x: Mal hoor Wn ences . Maximum Loads @ [980 | 1120 | 1260 | 1460 | 120 | 1600
The total load that can be Kite isthe value which is deducted the weight of
hook block, sing and all other iting devices from main boom ratings. No. of Part Line wa Tw] sf.
Maximum Loads N)| 1.708 [1,804 | 1883 | “h0pr
Mevimum Leads @ [1740 | ve40 [1920 [2000] |