Mobile Harbour Crane
G HMK 6407
Technical Data
Table of Contents
1.0
2.0
3.0
40
5.0
6.0
7.0
8.0
9.0
10.0
14.0
12.0
Main Dimensions
Weights
Main Drive
Hoist
Slewing Gear
Luffing Gear
Travel Gear
Ambient Conditions
Stability Requirement (Percentage of Tipping Load)
Classification of Crane and Mechanisms
Lighting
Surface Treatment
18412-TD-04-0 Page 1 of 5
GE >
GOTT!
por tcaony Cy
al
Page
BOR RRO OHENNN
2011-04-07
cK=Mobile Harbour Crane
G HMK 6407
1.0 Main Dimensions
Length of chassis without stabiliser pads
Width of chassis without stabiliser pads
Size of stabiliser pads **
Propping base (length, width)
Tail radius
Height of boom pivot point
Crane operator viewing height
Boom length
Maximum radius
Minimum radius
Hoisting height on hook above quay *
Hoisting height on hook below quay
2.0 Weights
Counterweight
Total weight of operational crane”**
3.0 Main Drive
Type of drive system
34
sel Engine *
Manufacturer
Model
Engine type
Cooling
Nominal output
Number of cylinders
Fuel consumption (at full load)
3.2 Fuel Tank
Volume of main fuel tank in chassis,
Volume of intermediate tank in superstructure.
Possible operating time without refueling
(depending on operating mode and intensity)
18412-TD-04-0 Page 2 of 5
Ga >
Gt
for tcnatny Gy I
a
approx, 477m
approx, 90m
2x2.0mx45m
14.0mx125m
75m
approx, 23.0m
approx, 26.1 m
515m
1.0m
44.0m
11 mto 40 m radius 470m
51 m radius 29.0m
120m
95.01
upto 420.0t
Diesel - electric
‘Cummins
QST 30-G2 NR1
Diese!
Water
895 kW at 1800 rpm
12
max. 216 gikWh
approx. 7000 |
approx, 1000 |
up to 220 h
2011-04-07Mobile Harbour Crane corrwatp E>
G HMK 6407 cme ee
4.0 Hoist
Number of rope drums 1
Number of ropes 2
Hoisting speeds:
to 18.0t 90.0 mimin
45.01 44.0 m/min
63.0t 33.0 mimin
100.0t 22.0 mimin
5.0 Slewing Gear
Number of slewing gear drive units 1
Slewing speeds
1063.08 to 1.6 rpm
fo 100.01 to 0.6 rpm.
Maximum peripheral speeds at boom head: without load to 300 mimin
to 63.01 to 200 mimin
to 100.01 to 80 mimin
6.0 Luffing Gear
Maximum luffing speeds’ to.63.01 82 mimin
to 100.0 34 mimin
Average luffing speeds: to63.01 65 mimin
to 100.01 27 mimin
7.0 Travel Gear
Travel speed upto 80.0 mimin
Total number of axles 7
Number of steered axles 7
Number of driven axles 2
Number of wheels 28
‘Tyre size 14.00-24
Climbing ability 6.0%
Vertical axle compensation +250 mm / -250 mm
Minimum inner curve radius approx. 4.9m
Minimum outer curve radius approx. 145m
Maximum crab steering angle approx. 25°
18412-TD-04-0 Page 3 of 6 2011-04-07
we ok 20