JIS Bx2240 84 MMH 4933608 0042904 2 mm ————
UDC 621.643.412
JAPANESE INDUSTRIAL STANDARD
Basic Dimensions of Copper
Alloy Pipe Flanges
JIS B 2240-1
Translated and Published
by
Japanese Standards Association
Printed in JapanJIS BxX2240 84 MM 4933608 001905 4 mm
‘Translation without guarantoo
In the event of any doubt arising, the original
standard in Japanese is to be evidence
Copyright oy he Topanese Weiter Sandara
Sun Aug 05 100 2007JIS 842240 84 MH 4933408 0012906 b mm
UDC 621,643.412
JAPANESE INDUSTRIAL STANDARD Jis
Rasic Dimensions of Copper Alloy Pipe Flanges 8 2740-1984
1, Scope
This Japaneso Industrial Standard specifies the basic dimensions of copper
alloy pipe flanges of nominal pressure of 5 K, 10 K and 16 K connecting pipes
and valves which’ are used for general pipe arrangements of vapor, alt’, gas,
water, oll, ete. (heretnafter referred to as the "flange"),
Remark: The units and numerical values given in { } in this standard
aro in accordance with the International Systom of Units (SI),
and are appended for reference.
2, Relation between States of Fluids and Maximum Working Pressures
The relation between states of fluids and maximum working pressure shall
be in accordance with Table 1.
Applicable Standards:
JIS B 1001-Diameter of Bolt Hole and Counterbore
JIS B 2202-Dimonsions for Pipe Flange Facing
JIS B 2203-Tolerances for Pipe Flanges
JIS G 3101-Rolled Steel for General Structure
JIS H 3300-Copper and Copper Alloy-Seamloss Pipes and Tubes
31S H_3320-Copper and Copper Alloy-Welded Pipes and Tubes
JIS H §101-Brass Castings
JIS H 6111-Bronze Castings
Copyright by the Japanese idstrat Standards
Sun Aug 05 1004 2007