1. The document reviews a procedure qualification record and welding procedure specification for 13CR martensitic stainless steel, noting several issues: parameters like size, temperature, and time were not specified in test coupons; signatures were missing; references to outdated specifications were used.
2. Specific issues called out include using the updated 2017 specification, noting the pipe thickness for qualification was 17.1mm not 17.2mm, and inputting the required PQR number.
3. A repair WPS was not included as required.
Original Description:
PQR REVIEW
Original Title
13cr Martensitic Stainless Steel Pqr and Wps Review
1. The document reviews a procedure qualification record and welding procedure specification for 13CR martensitic stainless steel, noting several issues: parameters like size, temperature, and time were not specified in test coupons; signatures were missing; references to outdated specifications were used.
2. Specific issues called out include using the updated 2017 specification, noting the pipe thickness for qualification was 17.1mm not 17.2mm, and inputting the required PQR number.
3. A repair WPS was not included as required.
1. The document reviews a procedure qualification record and welding procedure specification for 13CR martensitic stainless steel, noting several issues: parameters like size, temperature, and time were not specified in test coupons; signatures were missing; references to outdated specifications were used.
2. Specific issues called out include using the updated 2017 specification, noting the pipe thickness for qualification was 17.1mm not 17.2mm, and inputting the required PQR number.
3. A repair WPS was not included as required.
13CR MARTENSITIC STAINLESS STEEL PQR AND WPS REVIEW
PROCEDURE QUALIFICATION RECORD (PQR)
Use current updated spec (DEP 1 SPECIFICATION 61.40.20.30-GEN FEBRUARY 2017). ISO 13847 no longer in use. Pipe use for procedure Use 17.1mm as stated in the mill 2 qualification certificate and not 17.2mm UNITS OF PARAMETERS NOT STATED Test COUPON 004 3 (e.g size, temp, current, voltage, DATE: 8/4/19 length, time, etc ) UNITS OF PARAMETERS NOT STATED Test COUPON 005 4 (e.g size, temp, current, voltage, DATE: 10/4/19 length, time, etc ) 1. Not signed. Must be signed to make it valid POST WELD HEAT 2. Reference to the specification used 5 TREATMENT PROCEDURE for the WPS not stated 3. Entire document not consistent with the work done RADIOGRAPHIC TESTING Not signed. Should be signed to make 6 PROCEDURE it valid WELDING PROCEDURE SPECIFICATION (WPS) SPECIFICATION Reference the current spec (DEP 7 61.40.20.30-GEN FEBRUARY 2017). ISO 13847 no longer in use. PQR NUMBER Input the PQR number. TO BE 8 QUALIFIED is only use for the pWPS. Thickness and Thickness 1. Thickness of pipe use for Range qualification should be 17.1mm as stated in the pipe mill certification and 9 not 17.2mm
2. Thickness Range should be
17.1mm – 21.40mm 10 REPAIR WPS Not available. Should be included