Kindly read all the instructions carefully before creating this model -
a) It will take around 2 to 3 hrs to build this Model.
b) You will need Paper, scorer/bone folder/non working ball point pen,
scale, scissors, printer, glue.
c) For best results use Card stock/ Pastel sheet/ Ivory sheet for
printing . (basically thick paper around 150 - 300 gsm)
d) Change your printer settings to Heavy or Cardstock for fine printing
results (depends on the type of paper you are using)
e) Templates are compatible with both Letter & A4 size paper, print
on 100%. For this, make sure “Fit to picture frame’ is unchecked in
your printer settings while taking out printouts.
f) These Templates are Black & White. You need WHITE - 4 sheets &
ORANGE - 3 sheets or any 2 colors as per your choice.1) CUT THE TEMPLATES 2) SCORE THEM
2 E35
3) FOLD/CREASE ALONG THE SCORED LINES, MATCH FLAPS & PASTE THEM
* (follow same instructions
for rest of the parts )
4) ONCE YOU ARE DONE, YOUR MODEL WILL LOOK LIKE THIS
aw vi
yy Rabbit ZA i
Scena ® = —
(Poste on pletfor)
Platform