Professional Documents
Culture Documents
: :,
,:::::::: ::` ::: :::
,:::::::: ::` ::: :::
.,,:::,,, ::`.:, ... .. .:, .:. ..`... ..` .. .:, .. :: .::, .:,`
,:: ::::::: ::, :::::::
`:::::::.,:: ::: ::: .:::::: ::::: :::::: .::::::
,:: :::::::: ::, :::::::: ::::::::.,:: ::: ::: :::,:::, ::::: ::::::, ::::::
::
,:: ::: ::: ::, ::: :::`::. :::.,:: ::,`::`::: ::: :::
`::,` ::: :::
,:: ::. ::: ::, ::` :::.:: ::.,:: :::::: :::::::::
::` :::::: :::::::::
,:: ::. ::: ::, ::` :::.:: ::.,:: .::::: :::::::::
::` :::::::::::::::
,:: ::. ::: ::, ::` ::: ::: `:::.,:: :::: :::` ,,,
::` .:: :::.::. ,,,
,:: ::. ::: ::, ::` ::: ::::::::.,:: :::: :::::::`
::` ::::::: :::::::.
,:: ::. ::: ::, ::` ::: :::::::`,:: ::. :::::`
::` :::::: :::::.
::, ,:: ``
::::::::
::::::
`,,`
http://www.thingiverse.com/thing:1267014
Delta 3D Printer Effector by FlightFixit is licensed under the Creative Commons -
Attribution - Non-Commercial license.
http://creativecommons.org/licenses/by-nc/3.0/
# Summary
This is a Delta 3D Printer's Effector that has been designed for the use with my
Delta 3D Printer, but should work with many different printers. I connected this to
my printer with some 10mm Carbon fiber tubes and Traxxas ball pivots, and ever
since i have had a rock solid solution for my delta mechanics! The effector was
designed for the ability to use many different heads, not just that of a printer.
There are three m5 mounting holes and a larger 50mm center hole that anyone could
design a mount for to connect things other than a print head, this could include a
Dremel, laser diode, Exacto knife and much more!
Feel free to check out the printer that this was designed for at this link:
http://www.thingiverse.com/thing:1266969
# Print Settings
# Post-Printing
## Remove Support
Just remove the small amount of support and you should be golden!