SaaS.
STEP CHANGE IN SAFETY
\
WAAAAAAARAARAARAAAAA
\
.
y
X
y
sar
~~ Power Tongs
Here are 6 simple alterations to POWER TONGS that should help
REDUCE ACCIDENTS with this type of equipment. They are not meant
to be a COMPLETE SET OF recommendations to reduce these Kind
‘of accidents, but they can be QUICKLY AND EASILY put in place,
‘and will help to IMMEDIATELY CUT DOWN THE NUMBER OF
ACCIDENTS Involving POWER TONGS.
Long Term Recommendations are in the process of being drawn up.
Please use those In your Safety Meeting and toolbox talks.
WEB HANDLES
"Web Handies" should be used for
maneuvering tongs on and off pipe. This,
prevents fingers being crushed between
ato elo
WORKING AT HEIGHT
‘Where casing slips are required, Flush Mounted Slips should Ey bans] SAFE AREAS
be used. This avoid the unnecessary hazard of working above | 4 GI] Anand holds should be coloured
spider sips, andthe complications of using back-up tongs. ‘green, The safest place to put your
PINCH POINTS:
Al Pinch Point areas should be guarded, or
where this isnot practical, marked with
Black and Yelow stipes. Donot place hands
inthese areas
SAFETY INTERLOCKS
Safety Interlocks should be fit to
prevent the operation ofthe tong when
the jaws are open.
HAND HOLDS.
All handles should be suitably quarded. Where this is not
possible hey should be fited with “soft gip" handles. This
measure reduces the effects of fingers being crushed between
the tong and other steel objects
WAAAARAAAAAAAAAAAAYN
~~