| Technical guide
CHARACTERISTICS
Casing diameter ash
Height 8.20 um Angle of Lift of balance 33°
Frequency ge'e00 Ah Thread 6 vieding ston 1.00 mm
Automatic wrist-chronograph with 2 pushers In che usual position.
Chronegraph coupling by dise systen.
Your, minute and second homers self-co-ozdinaced.
‘Svee? second hand.
Contsal 60 minute socosder hand.
L2-nour recorder hana.
Synchronization of tie 3 chronograph hands fe ensured by a
single wheel-train chain.
Sesll socond hand.
*Scop-second device.
jate indicator: with zapid cor:
Autometic unidirectional Winding of simple conception.
Fine sdjusenent syston with mobile stud-holder.
Reuovel of barrel without disassembling of novenent.
MANIPULATION
f the chronograph pushers
Pucher "A!" 1 let push = start of hands ¢-D-E
2nd push ~ step of hands ¢-D~E
push = reset to zero of hands G- D- =
ben stopped.
of the winding crow
Position 1 (against the case) : ~ manval winding
Position 2 (middle) ~ rapid correction of date
by turning the winding
croun in clockwise direction
~ rapid corvention of day
by turning che winding
exoen in anti-clockwise
Position 3 (excericr) ~ tine setting
~ stop of small secondDISASSEMBLING
| ed
arts in synthetic material :
should be manipulated carefully and not
held by the functional sections.
op.
Port [Fixing
- | osder of operations tee [lee Renarke
1.0, EXTERIOR
Tas | aecat chronograph Fande
fe zex0
2 | open te
1:3. | Winding ween | wor [Pressure
| lier
Tots_| teense
5. | tasere sevenent fa The wovensut bolder vith
sovesior belsee pushers for cal. 1360
eoaniatoay be oned
T&. | Rafts winding sven Fresvore
wee ie
1.2. | tutn soweneat over
1.8. | secep second band I Peer 8
1.9. | Hour bana
er iat
Minute recorder hand
1:10, | tour recorder hand
‘Bi-hour hand
2
Seal escond Rand
Dial
by preceurs
levers in positions
fh and 10°
1.14. | Turn movement over : 7
2.0, AUTOMATIC ECHANTSH
2.1, | Boer gib
2.2. Rotor 1143 i
2.3. | tocer pinion 178
2.4, | tuputee click qaaT_|T sexew 5427
2.5. | der for veduccion gear Tass [1 serev 52155
2.6, | Reduction gear 1a
2.2. | stop erick a8er iréer of operations Pace |Psing ca!
No. | us No. [device Aeris
3.0. MONOR - WHEEL TRAIN - ESCAPRIENT — UPPER MECHANTSH.
3:1, | tet dows sainapring 7 By soving epring-elick
436 aay from crown
wheel 420
3.2. | Barrel axle 139) Extraction se per fig. 19
3.3. | narrel 161 To separate the 2 parts
Gore end ratchet wheel 197 Hen 6
s.4. | patance cook L21/3|1 serew 512.
3.5. | Patter cock 125_|2 screws $125
3.6. | patter gorke no
3.7. | Coupling lever spring 3320 [1 ccrew 5108
|s.8. | 3/4 piace vriage 106 _|2 screws $106
3.9. | Driving pear for ratchet vhes! 1482
s.10. | Grown wheel cover 109
birt. | crown wieet 420
fs.12. | covpting lever ond 081 Canaet be extracted
coupling gear 080 ceparately
p13. | tnteredists vneel 203,
14. [Beeape wheel 705
pais. | Fourth wheet 224
+16. | Chronograph pinion 8000 Move friction-spring 6290
vickout deforming it
Second haamey 8224 See fig. 13
‘Tum novenent over
4.0. DAY ~ DATE
st. [ney ingicator guard 2760 | ny pressure | Extraction as per
Fig. 16
ki Day indicator 2561/
h. Dace indicator guard 2535 [5 screws 52535
k-4. [Hour vueet 235
f.9. [Date and day jumper spring 2535
-6. [pate 2557/1]
+7. |Date and éay jumper 2576
Double date setting wheel 2542
Js.9- | Intermediate vheel for hour recorder | g616
b.10. | nour wieet spring 499