Professional Documents
Culture Documents
Education Services
Overview
This 5-day virtual instructor-led training provides students with the knowledge
Dell Networking Installation &
to deploy Dell Networking switches. The course covers the configuration of
networking protocols and features using the Dell Networking Operating System Configuration
(OS) on Dell multi-layer switches. This training is highly recommended for
individuals preparing to take the Dell Networking Professional exam to deploy Delivery
Virtual instructor-led
Dell Networking switches. Method
training
Audience
Network engineers and system administrators who are responsible for
Duration 5 days
configuring and maintaining networks and assumes basic to intermediate level
knowledge of Layer 2 and Layer 3 networking technologies.
Skill Level Intermediate
Course Objectives
After completing this course, participants will be able to: Dell Networking
Demonstrate enhanced networking knowledge. Switching & Dell
Highly Networking Routing
o The theory presented prior to each lab offers participants
Recommended eLearning courses
knowledge of select protocols and features and how they are
Prerequisites or
deployed with Dell Networking switches using the Dell CCNA-level
Networking Operating System. certification
Demonstrate enhanced networking skills.
o The lab exercises enable participants with the skills necessary to Visit LearnDell.com for
deploy the solutions in the scenarios presented. Proper Schedule upcoming dates and
configuration as well as verification of expected operations and registration
information
performance are steps included in each lab exercise.
Modules
Module 1: Equipment Access & Networking Topology Module 5: Spanning Tree Protocols
Familiarization STP
Access lab equipment via Remote Desktop RSTP
Connection MSTP
Familiarization with lab network topology, devices PVST+
and interconnections between devices
Module 6: Link Aggregation with Port-Channels
Module 2: Introduction to Dell Networking Command Line Static port-channels
Interface (CLI) Dynamic port-channels with LACP
o CLI modes for configuration and verification
o CLI navigation Module 7: VLT & MLAG
VLT on S-series switches
Module 3: Basic Layer 2 Configuration and Verification MLAG on N-series switches
Layer 2 default settings
The default VLAN Module 8: IPv4 Connectivity
IPv4 Addressing
Module 4: VLANS Network IP Connectivity
VLAN creation
Access ports
Trunk ports
Native VLAN
Module 9: OSPFv2 Module 14: IPv6/OSPFv3
OSPF LSA’s IPv6 Connectivity
Single-area OSPF networks Sinlge-area OSPFv3
To learn more about Dell Education Services, contact your Dell Account Executive or visit our website at Learndell.com or e-mail us at:
Americas: US_Training@dell.com Europe, Middle East, Africa: EMEA_Training@dell.com
Asia Pacific: APJ_Training@dell.com Latin America: MCLA_Training@dell.com
Brazil: Cursos_Brasil@dell.com South Africa: ZA_Training@dell.com
2015 Dell, Inc. Trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products in the United States and/or other countries. All other
company names are trademarks of their respective holders. Information in this document is subject to change without notice. Offer subject to change, not combinable with all other offers. Taxes and other fees
apply. Dell reserves the right to cancel orders arising from pricing or other errors. Dell, Inc. While every effort is made to ensure the information given is accurate, Dell does not accept liability for any errors or
mistakes which may arise. Availability of training and terms vary by region.