Loop Command Application Notes
umn
[a fe telco fa» —
| siefseo
mn
~ me + Boca
aol geo] = Up Sisk ts | > [ee
STEAH FLOW re art) | | Fecowarer
FT I 1 VALVE
| 1
afm |e sug! |g '
FEEDWATER FLOW = FH ENTE BOTROT PH TAFT HEE
soania1n
Bailey Controls
Babeoek & Wilcox, 3 McDermott company
cr hToy Nero) ptm) |(eleh 4
1-00S-Z64N-VTABLE OF CONTENT!
Introduction
Symbols
Function Codes
Function Generator-F C 1
LeadiLag-F C3
‘Square Root - F C7
Low Select -F C11
2-Input Summer-F C 15
Multiply -F C 16
PID-FC 19
MIA Station (Basic) -F C 24
MIA Station (Cascade). FC 22
MIA Station (Ratio). F C 23
Adapt-F C 24
Analog Input -F C 27
Analog Exception Report - FC 30
Time Delay (Analog) -F C 58
Model Parameter Estimator - F.C 152
ISC Parameter Converter - F.C 153,
‘Adaptive Parameter Scheduler F C 154
‘Smith Predictor- F.C 160
Basic Control Loop .
Cascade Control Loop
Ratio Control Loop
Analog Time Delay
Three Element Feedwater Control
PID - Gap Control
Feedforward Control
Override Control
Decoupled Blending Control
SelfTuning Control
References
88
66
68INTRODUCTION:
‘This document is intended to show typical configurations which can be
used to achieve a number of different control actions in a Bailey Loop
Command Controller The configurations shown are intended to serve as
guidelines to aid in the configuration process They can be used in con-
junction with other configurations or as a starting point for the development
of other control loops
The first part of this document contains the various function codes needed
to make the following configurations A general description of the function
code 1s Included along with the description of its various specifications Also
a description or an explanation of the application is included
The second part of the document has twelve control algorithms There
1s a short description of each application, @ process drawing and the Loop
Command function block drawing of the configuration