Professional Documents
Culture Documents
Dollar Carp PDF
Dollar Carp PDF
Left Left
180° Left
4 5 6
Fold short edge along long edge, Fold short edge along the central Fold a vertical crease intersecting the
and crease only up to the central horizontal crease. Unfold. reference point.
horizontal crease. Unfold.
7 8 9
Pinch the middle of the reference Pinch the middle of the reference
points. points.
10 11 12
Pleate using existing creases. Fold bottom layer creasing along the Crease parallel to the horizontal
folded edge. Unfold. Unfold the pleat, center line starting from the edge to
back to completely open position. This the second vertical crease line.
creates a third vertical crease, with the
same distance from the first to the
second creases.
Pre-crease for a future step. Mountain fold Pre-crease for a future step. Mountain Pre-crease for a future step. Mountain
the raw edge along the diagonal, from fold the raw edge along the diagonal, fold parallel to the diagonal created on
corner to an arbitrary point before the from the corner to the horizontal line. step 5.
vertical line.
16 17 18
Fold short edge along the long edge. Fold top edge along the vertical edge. Unfold.
Unfold.
16-18
19 20 21
Repeat steps 16 to 18 on the other side, Steps 20 to 23 are the pre-creasing for Fold and unfold.
creating symmetrical creases. the scales. Fold and unfold.
22 23 24
Crease along the folded edge until Pleat on existing creases. Crease along the folded edge until
the vertical crease line. Unfold. the horizontal center crease line.
Unfold the pleat, back to completely Unfold. Unfold the pleat, back to
open position. completely open position.
24-27
28 29 30
Repeat steps 24 to 27 on the other Pleat using creases created on Repeat the pleat on the other side.
side, creating symmetrical creases. previous step. A new crease (valley) is
required in the middle. The model will
not lie completely flat.
31 32 33 32
31
Pleat all layers. Repeat the pleat on the other side. Repeat cross pleats alternating the
sides, all the way to the end. For
each pleat, fold all layers.
34 35 36
180°
39 40 41
42 43 44
Inside reverse fold using creases Crimp. You may need to use a tweezers.
created on steps 14 and 15. Note that Very carefully and gently, fold in half If you started with the correct orientation,
on the underneath layer the raw edge all layers, molding the back of the you will notice the pattern of the note
will be perpendicular to the axis. fish. which will become the eyes.
45 46 47
Fold behind (on both sides) locking Crimp, to make the fins. Lift the fins slightly, so that it can
the shape of the head. lie flat on the surface. Shape (on
both sides).
View from top, at the head area. Pleat, to create the lips. Fold inside. Pleat slightly, to shape the
Use the pattern printed on mouth.
the note as a reference. Note: don’t fold the lips in
Make the valley fold on the half, otherwise it will split.
printed line.
52 53 54 55
56 57 58
59 60