Professional Documents
Culture Documents
SAMUR KD Tanks Project PDF
SAMUR KD Tanks Project PDF
!
TO WHOM MY CONCERN
!
SAMUR KD TANK - PTS 16A & 16B
6.3.4 ! Diesel
6.3.4.1
Reference is made to the above mentioned, Tankguard HB is a high-build admin adduct
Coating System No. 16a : Initial painting, Maintenance Painting for Blast Cleaned Surface and
Power Tool Cleaned Surface.
According to PTSRoof
Surface to be painted
Service Temperature Up No
:
: to 60 ºC30.48.00.31-P coating System No. 16a & 16b, the generic of the
and Shell plate
Floating roof tank shell plates which are subjected to excessive abrasion and wear shall be
uncoated. However, if the Owner considers otherwise, suitable coating systems may be
specified. 6.3.4 Diesel
6.3.4.2 Coating System No. 16b : Initial painting, Maintenance Painting for Blast Cleaned Surface and 6.3.4.1 Coating System No. 16a : Initial painting, Maintenance Painting for Blast Cleaned Surface and
Power Tool Cleaned Surface. Power Tool Cleaned Surface.
Surface preparation : Blast cleaning to ISO 8501-1 : 1988, Sa 2.5, or Power tool Surface preparation : Blast cleaning to ISO 8501-1 : 1988, Sa 2.5, or Power tool
cleaning to ISO 8501-1 : 1988, St 3 for minor touch-up cleaning to ISO 8501-1 : 1988, St 3 for minor touch-up
painting painting
Surface to be painted : Bottom plate and Vessels
Surface to be painted : Roof and Shell plate
Service Temperature : Up to 60 ºC
Service Temperature : Up to 60 ºC
6.3.4.3 Coating System No. 16c : Alternative System for Bottom Plate
Surface preparation
Surface to be painted
:
:
Blast cleaning to ISO 8501-1 : 1988, Sa 2.5
Bottom plate and Vessels
! Floating roof tank shell plates which are subjected to excessive abrasion and wear shall be
uncoated. However, if the Owner considers otherwise, suitable coating systems may be
specified.
! Service Temperature
Coating system
1 st coat Epoxy Primer
: Up to 60 ºC
DFT
50 µ
6.3.4.2 Coating System No. 16b : Initial painting, Maintenance Painting for Blast Cleaned Surface and
Power Tool Cleaned Surface.
Surface preparation : Blast cleaning to ISO 8501-1 : 1988, Sa 2.5, or Power tool
2 nd coat Epoxy Glassflake 200 µ cleaning to ISO 8501-1 : 1988, St 3 for minor touch-up
Trust all is in order; should you need any further clarification, please feel free to contact us.
3 rd coat Epoxy Glassflake 200 µ painting
Total 450 µ
Surface to be painted : Bottom plate and Vessels
Service Temperature : Up to 60 ºC
Yours faithfully,
JOTUN (M) SDN BHD (16434-U) Coating system
1 st coat Amine Adduct Epoxy 100
DFT
µ
2 nd coat Amine Adduct Epoxy 100 µ
3 rd coat Amine Adduct Epoxy 100 µ
Total 300 µ
!
!
6.3.4.3 Coating System No. 16c : Alternative System for Bottom Plate
! 3 rd coat
Total
Epoxy Glassflake 200
450
µ
µ